Bruksanvisning Tunturi J77P Löpband

Bruksanvisning

3

METER

Plug in the pulse cable and flat ribbon cable connectors on

the back side of the display. Tuck the cables inside the meter

base and carefully slide the meter onto the base (fig. 5).

NOTE! Be careful not to pinch or otherwise damage the

cables.

Remove the protecting film from the display.

METER CABLE

Plug the lower end of the flat ribbon cable coming out from

the right sidecover into the upper end coming out of of the

right handlebar. Thread the connected cable inside the hole

in the sidecover and push the cover plug on the through hole

so that the cable will not be damaged (fig.6).

PLUGGING IN THE TREADMILL

Plug the socket end of the power cord into the treadmill at

the lower right front corner (fig. 7).

Before connecting the device to a power source make sure

that the voltage is correct from the type plate (at the lower

right corner of the treadmill, next to the power switch).

SAFETY TETHER KEY

The treadmill is equipped with a safety tether key. If the key

is removed from its place near the electronic display, the

treadmill will immediately stop.

Insert the yellow safety tether key into the meter base. Attach

the clip on the other end of the cord to your clothing (fig. 5).

NOTE! The treadmill cannot be used and the meter will not

function completely if the tether key is not properly installed

in the meter base (text “tEtH” in the display).

TRAINING

NOTE! Ensure before you start to use your treadmill that

both the belt and the running deck are moist with lubricant.

If these are dry, lubricate them.

Turn on the power switch at the lower right front corner of

the treadmill.

Stand on the landing rails to the left and right of the running

belt. Do not stand on the running belt.

When the treadmill is switched on, the system first checks

LED display operation. After this the meter displays its

“tunturi J77P” emblem and then “Usr 1” or “Usr 2”. They

indicate the meter’s user alternatives or memory stores for

your own exercise programs. Select the user mode desired

by pressing the arrow keys (SET/ADJUST) and ENTER. The

meter will now display the weight entry mode.

ASSEMBLY

Ensure that all parts are present (fig. 1):

AMeter

B Safety tether key with cord (+ 1 spare key)

C Power cord

D Left handlebar

E Handlebar bracket cover

FRight handlebar with attached meter base

GMain frame

HTransmitter belt

Assembly kit (contents are marked with * in the spare

part list)

T-Lube can

If you notice that a part is missing, contact the dealer and

give the model, serial number and spare part number from

the spare part list at the back of the manual.

Left, right, front and rear are seen from the exercising

position.

Assemble the equipment as follows:

HANDLEBARS

NOTE! Do not tighten any locking screws before both

handlebars are completely assembled.

Remove and dispose the silicate bag from the bottom of the

right handlebar. The purpose of this bag is simply to absorb

dampness during transportation and storage.

Install the right handlebar in place at the front right corner of

the treadmill and secure it using the allen screw and washer.

Press the white decorative cap onto the lower end of the

right handlebar (fig. 2).

Attach the left handlebar to the running deck side rail using

an allen screw and a washer. If necessary, lean the treadmill

on one side with help of another person. Attach the handle-

bar bracket cover by snapping it into place over the lower

end of the left handlebar (fig. 3).

NOTE! Plug the small cable, located at the top of the left

handlebar, into the cable coming out of the meter base

before connecting the two handlebars (fig. 4).

Push the left handlebar inside the plastic meter base

attached to the right handlebar.

When the top of the left handlebar is touching the top of the

right handlebar, tighten the screws in the bottom of the

meter base, while ensuring the handlebars are held securely

together.

NOTE! Be careful not to pinch or otherwise damage the flat

ribbon cable that runs inside the right handlebar.

Tighten the locking screws of both handlebars.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Tunturi J77P Löpband. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Tunturi. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Tunturi J77P Löpband på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Tunturi Löpband
Fler bruksanvisningar för Löpband

Vanliga frågor om Tunturi J77P Löpband

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Tunturi T20 Löpband

Bruksanvisning

Tunturi Cardio Fit T35 Löpband

Bruksanvisning

Tunturi T80 Löpband

Bruksanvisning

Tunturi J4F Löpband

Bruksanvisning

Tunturi Platinum Pro 5.0 Löpband

Bruksanvisning

Tunturi T90 Löpband

Bruksanvisning

Tunturi Run 3.0 Löpband

Bruksanvisning

Tunturi Cardio Fit T40 Löpband

Relaterade kategorier