Bruksanvisning Cotech GS535 Brandvarnare

Behöver du en bruksanvisning för din Cotech GS535 Brandvarnare? Nedan kan du se och ladda ner PDF-bruksanvisningen gratis på svenska. Den här produkten har för närvarande 3 vanliga frågor, 0 kommentarer och har 0 röster. Om det här inte är bruksanvisningen du vill ha, vänligen kontakta oss.

Är produkten defekt och erbjuder bruksanvisningen ingen lösning? Gå till ett Repair Café för gratis reparationstjänster.

Bruksanvisning

Loading…

United Kingdom •
www.clasohlson.co.uk
English
Ver. 20220427
Optical Smoke Alarm
Art.no 36-8484 Model GS535
Please read theentire instruction manual before using theproduct and then
save it for future reference. Wereserve theright for any errors in text or images
and any necessary changes made to technicaldata. Ifyou have any questions
concerning technical problems please contact our Customer Services.
Fire safety
Preventative measures:
Store any matches and lighters in alocked room out of children’sreach.
Never empty theashes from ash trays, stoves and grills into waste bins until
theashes have completely cooled. Itis advisable to let them cool overnight
before disposing ofthem. Sootand ashes from stoves and fireplaces should
be collected in metal buckets fitted withlids. Always place receptacles hol-
ding hot ashes on afireproof surface.
Never leave naked flames such as candles unattended. Onlyuse non-flam-
mable candle holders and candlesticks.
Make sure that no sparks can escape from your wood-burning stove or
fireplace and ensure that thefire has died before going tobed.
Do not store or handle combustible liquids/substances close to sources
ofheat.
Replace any faulty electrical plug or wiring. Makesure that thecorrect type
of fuses and circuit breakers are used in your consumerunit.
Remember to switch off your TV, computer and other appliances using
thepower switch. Remote controls don’t switch appliances off completely.
Do not place combustible materials and objects next to electrical heating
appliances. Avoidcontrolling electrical heaters with timers or any kind of
remote control device. Bearin mind that acombustible material might have
been placed on or next to anelectrical heating appliance while it was swit-
ched off without your knowledge.
It is important that chimneys and flues are cleaned regularly to prevent
chimneyfires.
Further information about fire safety in thehome can be obtained from
theDepartment for Communities and Local Governmenthps://www.
gov.uk/government/organisaons/department-for-communies-and-
local-government if you should need tips and advice about how to protect
your home and family fromfire.
Fire safety checks:
Check thecondition of your fire extinguishers and make sure that everyone
in your household knows how to usethem.
Draw up asafe plan of escape from your premises in case of emergency.
Makesure that there are alternative escape routes, such as windows. Make
sure that there is aladder or rope as analternative in case stairs are blocked.
Practise your escape plan to make sure that itworks. Decide upon anas-
sembly point to gather in anemergency.
Keep bedroom doors closed during thenight. Aclosed door can keep
thefire at bay long enough for you to make your escape through awindow.
If afire breaksout:
If afire alarm goes off, keep calm but act quickly.
Wake everyone up and make sure that they leave thebuilding according to
your escapeplan. Follow your escapeplan.
Carefully feel doors with theback of your hand before opening them – if they
are hot, don’t openthem. Tryto find analternative escaperoute. Ifyou have
to escape through smoke, crawl on your hands and knees under thesmoke.
Don’t waste time rescuing valuables.
If possible, close doors and windows to contain theblaze.
If thefire is small try to extinguish/contain it with awater hose, fire extinguis-
her or fire blanket. Firstmake sure that you have ameans of escape before
tackling thefire. Getout as quickly as possible if you realise that you can’t
extinguish thefire.
Call 999 as soon as you are free of thebuilding, call from aneighbour’s
house if you don’t have aphone.
Make sure that no-one re-enters thebuilding, wait for thefire brigade.
Positioning thesmokealarm
Smoke alarms should be positioned in themiddle of theceiling of aroom at
thehighest point, or at thehighest point of thehallway, staircase or landing.
Smokeand fumes will rise, accumulate on theceiling and enter thesmoke
alarm from thetop.
All bedrooms, corridors/escape routes should be equipped with smoke
alarms. Other rooms should also be equipped for comprehensive protection.
Corridors up to 3 m wide: The first smoke alarm should be place at a max
distance of 7.5 m from the end of the corridor. The max distance between
two smoke alarms should be 15 m.
Corridors less than 1 m wide: The first smoke alarm should be placed at a
max distance of 7.5 m from the end of the corridor. The smoke alarm should
be mounted in the middle of the ceiling. In these cases, the rule of keeping a
0.5 m distance to a wall cannot be met.
Exterior corridors and similar: If the total length and width exceed 16 m², an
extra smoke alarm should be mounted in the highest-lying area.
Horizontal/slanted ceilings: Smoke alarms should be placed at least 0.5 and
a maximum of 1 m away from the ceiling’s highest point on ceilings which
have a horizontal portion and a slanted portion with a slant of over 20º.
The smoke alarm should be mounted on the slanted portion of the ceiling
if the horizontal portion is less than 1 m wide. The smoke alarm should be
mounted in the middle of the horizontal portion if this portion is more than 1
m wide.
Place at least 0.5 m from a wall or other obstacle. If partition walls, furniture
or similar objects reach up
to ceiling level, then each of
these divided areas must have
their own separate smoke
alarm.
Sloped ceiling placement,
50–100cm from thepeak.
Several smoke alarms must be
mounted at various heights for
ceilings exceeding 6 m in height.
If ceiling beams or similar protrude
more than 0.2 m from the ceiling
and the area between the beams
is greater than 36 m², then the
smoke alarm should be mounted
in this area between the beams.
If beams protrude less than 0.2
m, then the smoke alarm can
either be mounted on the ceiling
or the beam itself.
Thegrey zone is deadair. Donot
install thesmoke alarm in thisarea.
Do NOT place thesmoke alarm in thefollowing places:
Do not place thesmoke alarm in thekitchen, where theventilation ispoor.
Smokeand vapours from cooking and baking could set thealarmoff.
Do not place thesmoke alarm close to extractor fans or airvents. Smo-
kecan be drawn to these places instead of to thesmokealarm.
Do not place asmoke alarm in agarage. Fumesfrom thecar exhaust could
set thealarmoff.
Do not place thesmoke alarm in areas with high humidity or areas that expe-
rience large changes in temperature. Thesmoke alarm should not be placed
in areas with temperatures below +0 °C or above +40 °C.
Note: Thesmoke alarm must not be paintedover.
Safety information
If thebedrooms are located in different parts of thehouse, asmoke alarm
should be placed in each bedroom.
If thehouse has several floors, asmoke alarm should be placed on
everyfloor.
Thesooner your family is warned of afire, themore chance you have of
saving yourselves and your property.
Smoke alarms should be positioned in themiddle of theceiling of aroom at
thehighest point, or at thehighest point of thehallway, staircase or landing.
Themore smoke alarms you have – thesafer you’llbe. Makesure that you
can hear thesmoke alarms from your bedroom.
Smoke alarms should normally not be more than 10–12 mapart. Themaxi-
mum floor space area that one smoke alarm can protect is 60 m².
Don’t put alarms in or near kitchens or garages where smoke or exhaust fu-
mes can set them off by accident. Neither is it advisable to fit smoke alarms
in humid rooms or close tofans. Notin agricultural buildings either.
Themajority of household fires start in thekitchen. Asmoke alarm should
therefore be placed in theroom next to thekitchen to provide as early as
warning as possible.
Factors which can increase theneed for having asmoke alarmare: Closed
doors, different ceiling heights, long distances or other obstacles that might
prevent or delay smoke from reaching thesmokealarm.
The smoke alarm must be mounted in a safe manner to ensure that it does
not fall and cause injury to someone. It may be difficult to mount
the smoke alarm to plasterboard ceilings or similar types of ceilings.
The battery must not be subjected to fire, direct sunlight or high temperatures.
Testing thesmokealarm
Test thesmoke alarm as follows: Pressand hold in thetest button for at least
5 seconds. Thealarm will emit 3 short beeps followed by apause of 1.5seconds
in acontinuous cycle for as long as thebutton is heldin. Thered LED will flash
acouple of times aminute.
Pushing in thetest button will test all theessential functions of thesmoke
alarm and check that thebatteryworks.
Thetest button simulates smoke entering thesmoke alarm,
i.e. thetest button has thesame effect as realsmoke.
It is crucial that thesmoke be tested regularly and often, at least once
amonth. Forexample in conjunction with house cleaning, or after along
holiday away fromhome.
Thesmoke alarm will only alert you when thebattery islow. Ifthere is any
other technical fault with thesmoke alarm it will not alert you to thisfact.
Thetest button on theother hand tests thebattery and all theessential
functions.
The smoke alarm must be replaced if it does not emit 3 short audible signals
when the test button is pressed in for 5 sec.
Warning: Donot test thealarm close to naked flames, these can damaged
thealarm and are dangerous. Wedo not recommend that you test thealarm
using smoke as results can be misleading if thecorrect test equipment is
notused.
Installation
1. Test that the smoke alarm works properly
by attaching the base plate to it. A short
audible signal will be emitted.
2. Press and hold the test button. A loud
audible signal will be emitted.
If no audible signal is emitted, the alarm
is faulty and should be replaced.
3. Remove the base plate from the smoke alarm. Use it as a template and
mark out the position of the mounting holes on the ceiling. Screw the base
plate onto the ceiling using the included screws. For concrete ceilings it
might be necessary to drill Ø 5 mm holes and insert the included wall plugs
before screwing on the base plate.
4. Twist the smoke alarm onto the base plate.
Battery
The battery in the smoke alarm will last for about 10 years.
Roughly a month before the battery dies, the alarm will emit short audible
signals at the same time as the red LED flashes. The smoke alarm should then
be replaced as soon as possible.
The alarm signal can be silenced for 10 hours by pressing the test button.
The smoke alarm will function as normal during this time, until the battery is fully
discharged.
Thesmoke alarm shall be replaced after
10years
Smoke alarms shall be replaced after 10 years of service. Theexpiry date
should be printed on theratinglabel.
Care and maintenance
Asmoke alarm which is dirty on theinside is more sensitive and often goes
off without reason.
Clean the inside of the smoke alarm carefully using a vacuum cleaner with a
dusting brush nozzle.
Clean the smoke alarm by vacuuming it at least once a year. Test the smoke
alarm according to the instructions in the owner’s manual. Check that all the
inlets are unblocked and that the smoke alarm is not damaged in any way. A
damaged smoke alarm must be replaced.
Responsible disposal
This symbol indicates that this product should not be disposed
of with general householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to theenvironment
or health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that thematerial
can be disposed of in aresponsible manner. Whenrecycling
your product, take it to your local collection facility or contact
theplace of purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally soundmanner.
Specifications
Power supply 3 V Lithium battery (lifespan 10 years)
Loudness >85 dB at adistance of 3 m
Maximum humidity 93 % RH
Temperaturerange 0–40 °C
Servicelife Thesmoke alarm shall be replaced after 10years.
Theexpiry date should be printed on theratinglabel.
Pause function
The pause function enables the alarm signal to be turned off in case of a false
alarm (such as when cooking or using a fireplace). The pause function is activated
by pressing in the test button of the smoke alarm that is sounding. The alarm
signal can be paused for a maximum of 10 minutes. The smoke alarm will then
return to normal operation.
Ladda ner bruksanvisning i Svenska (PDF, 0.81 MB)
(Tänk på miljön och skriv endast ut denna bruksanvisning om det verkligen är nödvändigt)

Loading…

Betyg

Berätta vad du tycker om Cotech GS535 Brandvarnare genom att betygsätta den. Vill du dela med dig av dina åsikter om denna produkt eller ställa en fråga? Lämna en kommentar nederst på sidan.
Är du nöjd med Cotech GS535 Brandvarnare?
Ja Nej
Bli den första personen som betygsätter denna produkt
0 röster

Delta i konversationen om denna produkt

Här kan du dela vad du tycker om Cotech GS535 Brandvarnare. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Cotech GS535 Brandvarnare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Cotech. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Cotech GS535 Brandvarnare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Märke Cotech
Modell GS535
Kategori Brandvarnare
Filtyp PDF
Filstorlek 0.81 MB

Alla bruksanvisningar för Cotech Brandvarnare
Fler bruksanvisningar för Brandvarnare

Vanliga frågor om Cotech GS535 Brandvarnare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Var ska jag montera min brandvarnare? Verifierad

Det beror på situationen men i ett hem är det bäst att installera en brandvarnare på varje våning. Installera den gärna i hallen eller andra utrymmen som sammanbinder olika rum. Placera aldrig brandvarnaren precis bredvid köket eller badrummet. Håll även minst 30 cm avstånd mellan en brandvarnare och en lampa.

Detta hjälpte (300) Läs mer

Kan jag använda ljus om jag har en rökdetektor? Verifierad

Detta beror delvis på rökdetektorns känslighet. I många fall kan ett ljus användas så länge det inte placeras i närheten av rökdetektorn. När ljuset blåses ut kan det bildas rök som kan utlösa rökdetektorn.

Detta hjälpte (58) Läs mer

Är en rökdetektor densamma som en kolmonoxiddetektor? Verifierad

Nej! En rökdetektor fungerar inte som en kolmonoxiddetektor och tvärtom.

Detta hjälpte (37) Läs mer
Bruksanvisning Cotech GS535 Brandvarnare

Relaterade produkter

Relaterade kategorier