Bruksanvisning AEG HK 46 N Cirkelsåg

Bruksanvisning

1

ENGLISH

HK 46 N

You have high standards and expect to purchase quality goods – quality offered by

Atlas Copco.

We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an AEG Electric Power Tool from Atlas Copco was the right

choice!

Nominal power 630 W. . . . . . . . . . . . . . . . . . . . .

No-load speed 4600 min

-1

. . . . . . . . . . . . . . . . . . . .

Saw blade dia. x hole dia 152x20 mm. . . . . . . . .

Cutting depth at 90° 46 mm. . . . . . . . . . . . . . . . . .

Cutting depth at 45° 30 mm. . . . . . . . . . . . . . . . . .

Weight 2,6 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . .

 Please pay attention to the safety instructions in the attached leaflet!

 Always disconnect the plug from the socket before carrying out any work on the

machine.

 Always wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

 Sawdust and splinters must not be removed while the machine is running.

 Before use check machine, cable, and plug for any damages or material fatigue.

Repairs should only be carried out by authorised Service Agents. Keep mains lead

clear from working range of the machine. Always lead the cable away behind you.

 Do not pierce the motor housing as this could damage the double insulation (use

adhesives).

 Dust that arises when working in wood or using the tool on industrial material can be

dangerous to health. In this case connect the tool to a suction device (e.g. Atlas

Copco absorbtion system AS 3 W).

 Always use the protective shields on the machine.

 Before switching on ensure that protective swing cover moves freely.

 Mind safety regulations issued by your employer’s liability insurance association.

Do not use grinder on any material containing asbestos.

 Protective cover operation only with the provided lever resp. automatically by the

workpiece.

 When plunge cutting secure the workpiece against kickback (e.g. with cross bar).

 Do not use saw blades not corresponding to the key data given in these instructions

for use.

 Be careful not to saw into nails or similar objects.

 The riving knife should be adjusted so that:

- the distance between it and the tips of the saw blade teeth does not exceed 5 mm

- it is not more than 5 mm away from the lowest point of the tips of the saw blade

teeth.

 Do not use cracked or distorted saw blades or HSS saw blades (high speed steel).

 The teeth thickness, or the set of the teeth must be thicker than the body of the

blade and the riving knife. Do not remove the riving knife (exception: plunge cutting).

 Do not brake the speed of the saw-blade after switching off the motor by pressing

on it from the side.

 Do not clamp the swivel protection guard.

 Clamp wooden rods on both sides of the saw blade to prevent them from rotating.

 Do not fix the on/off switch in the ”on” position when using the saw hand-held.

 Typically the A-weighted noise levels of the tool are:

Sound pressure level = 94dB(A)Sound power level = 107dB(A). Wear ear

protectors!

 Typically the hand-arm vibration is below 2.5 m/s

2

.

Introduction

Technical Data

Advice for your

safety

Measured sound

value

Measured

vibration value

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din AEG HK 46 N Cirkelsåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar AEG. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din AEG HK 46 N Cirkelsåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för AEG Cirkelsågar
Fler bruksanvisningar för Cirkelsågar

Vanliga frågor om AEG HK 46 N Cirkelsåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

AEG K 55 Cirkelsåg

Bruksanvisning

AEG TS 55 E Cirkelsåg

Bruksanvisning

AEG SMT 355 Cirkelsåg

Bruksanvisning

AEG HK 75 A Cirkelsåg

Bruksanvisning

AEG KS 66 S Cirkelsåg

Bruksanvisning

AEG BKS 18 Cirkelsåg

Bruksanvisning

AEG PS 305 DG Cirkelsåg

Bruksanvisning

AEG KS 55 S Cirkelsåg

Relaterade kategorier