Bruksanvisning Tanita BC-581 InnerScan Våg

Bruksanvisning

2

3

To ensure accuracy, readings should be taken without clothing and

under consistent conditions of hydration. If you do not undress,

always remove your socks or stockings, and be sure the soles of

your feet are clean before stepping onto the measuring platform.

Be sure your heels are correctly aligned with the electrodes on the

measuring platform. Don’t worry if your feet appear too large for the

unit, accurate readings can still be obtained if your toes overhang

the platform. It is best to take readings at the same time of day. Try to

wait about three hours after rising, eating, or exercising before taking

measurements. While readings taken under other conditions may

not have the same absolute values, they are accurate for determining

the percentage of change as long as the readings are taken in a

consistent manner. To monitor progress, compare weight and body

fat percentage taken under the same conditions over a period of time.

Note: An accurate reading will not be possible if the soles

of your feet are not clean, or if your knees are bent

or you are in a sitting position.

Heels centered on

electrodes

T

oes may overhang

measuring platform

1. Set Hour

Press and hold for 3 seconds to turn on the unit.

Press

to set hour and then press

SET

.

The unit will beep once to confirm.

2. Set Minute

Press to set minute and then press

SET

.

The unit will beep twice to confirm the programming.

The unit will then shut down automatically.

• Resetting time

Press and hold for 3 seconds to turn on the unit. Then follow the procedure 1 and 2.

Note: If you chose FitPlus mode, please re-input your menstrual period start date.

Select your personal number and enter how many days ago your menstrual period started.

Handling Tips

This monitor is a precision instrument utilising state-of-the-art technology.

To keep the unit in the best condition, please follow these instructions carefully:

•

Do not attempt to disassemble the measuring platform.

• Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.

• Avoid excessive impact or vibration to the unit.

• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.

• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid

using soaps.

•

Do not step on the platform with wet feet.

• Do not drop any objects onto the platform.

Inserting the Batteries

Turn the scale over and remove the battery cover by releasing the latch, insert 4 x AA batteries

(included) with the correct polarity as indicated.

Note:

Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly

positioned the fluid may leak and damage floors. If you do not intend to use this unit

for a long period of time, it is advisable to remove the batteries before storage.

Please note that the included batteries from the factory may have decreased energy levels over

time.

Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure

safe and accurate measurement.

Note:

To avoid possible injury, do not step on the edge of the platform.

Open as

shown.

Direction

of

the batteries.

1. Turn on the Power

Press

SET

to turn on the unit. The unit will beep to confirm activation, the Personal Button

numbers will be displayed, and the display will flash.

Note:

If you make a mistake or want to turn the unit off before you have finished

programming it, press

/OFF

.

2. Select a Personal Key Number

Press to select a Personal Button. Once you reach the Personal Button number you wish

to use, press

SET

. The unit will beep once to confirm.

SET

RECALL MEMORY

/OFF

3. Set Age

Use to scroll through the numbers. When you reach your age, press

SET

. The unit will

beep once to confirm.

Continue to the next page.

PREPARATIONS BEFORE USE

GETTING ACCURATE READINGS

AUTOMATIC SHUT-DOWN FUNCTION

The automatic shut-down function shuts off the power automatically in the following cases:

• If you interrupt the measurement process. The power will shut down automatically within 10 to 20 seconds,・depending upon the

type of operation.

•

If an extreme weight is applied to the platform.

• During programming, if you do not touch any of the buttons within 60 seconds.*

• After you have completed the measuring process.

*Note: If the power shuts off automatically, repeat the steps from “Setting and Storing Personal Data in Memory” (p.3).

SETTING (RESETTING) TIME

SETTING AND STORING PERSONAL DATA IN MEMORY

You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode.

The monitor can store personal details for up to 5 people.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Tanita BC-581 InnerScan Våg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Tanita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Tanita BC-581 InnerScan Våg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Tanita Vågar
Fler bruksanvisningar för Vågar

Vanliga frågor om Tanita BC-581 InnerScan Våg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Tanita UM-072 Våg

Bruksanvisning

Tanita BF-683W Våg

Bruksanvisning

Tanita BC-536 InnerScan Våg

Bruksanvisning

Tanita UM-041F Våg

Bruksanvisning

Tanita BC-552 InnerScan Våg

Bruksanvisning

Tanita UM-081 Våg

Bruksanvisning

Tanita BC-G02 Våg

Bruksanvisning

Tanita UM-070 Våg

Relaterade kategorier