Bruksanvisning Steba Pikkolo Basic Värmefläkt

Bruksanvisning

10

11

 IMPORTANT FOR FRANCE:

If the product is wall mounted, the electrical connection must be made according to the enclosed

drawing, cutting the cable and using a connection block between the product cable and the electricity

supply.

 In humid rooms, bathrooms or kitchens, this connection block must be installed at least 25 cm from

the floor. The electrical connection must also include the use of a 2-pole switch with a contact opening

distance of at least 3 mm.

5. Cable storage

 While the product is not in use, you can store the cable pushing it into the base of the product.

 Note that while the product is in operation, the cable must always be completely pulled out.

6. Use of the heater

See picture 5

6.1 Version with switch and thermostat



The heater has 2 knobs controlling the switch and the thermostat.

 The switch knob has 5 positions, allowing to select the desired power setting.

 Starting from the “¿” position, turn the thermostat knob clockwise until you hear a "click”: the

appliance starts working at the desired power setting.

 The thermostat maintains the desired room temperature switching on and off automatically the

appliance. The more the knob is turned clockwise, the higher is the maintained temperature.

Maximum thermostat setting corresponds at about 30°C; “¿” position corresponds to approximately

5°C.

 For correct use of the thermostat , see section “ USE OF THE THERMOSTAT”

6.2 Model with thermostat and 60' timer



The heater has 2 knobs.

 Turn the timer knob clockwise to select the working time you prefer from 5 to 60'. The heater starts

working at full power (2000W) and thermostat setting doesn’t influence the functioning;

 After the selected period the heater will automatically turn to mid power (1000W), thermostatically

controlled according to the thermostat setting. For the use of the thermostat see section 6.3.

 When the heater is working under timer control at full power, the thermostat doesn't control the room

temperature. In this condition, do not use the heater in small rooms when they are occupied by

persons not capable of leaving the room on their own, unless constant supervision is provided.

6.3 Use of the thermostat



In a room where the temperature is too high (more than 30°C), it is normal that the thermostat will not

switch on the heater.

 In a room where the temperature is too low (around 5°C or even less) it is also normal that the

thermostat will keep the appliance working until the temperature gets higher.

 To select the right thermostat position we suggest you to

- turn the thermostat in maximum position (clockwise);

- leave the appliance working until the comfortable temperature is reached;

- turn the knob anti clockwise until you hear a "click" and the appliance stops;

- turn clockwise again the knob (just a little): in this position the thermostat will maintain the

comfortable temperature you have selected.

7. Safety in the event of the product not functioning normally

 In the event of overheating, the safety system will automatically turn off the heating elements and the

motor. If this happens:

- switch off the fan heater using the main switch;

- remove the cause of overheating (i.e. obstacles in front of the air inlet or air outlet grilles, unusual

accumulations of dirt, etc);

- let the heater cool down for 15/20 minutes;

- switch on the fan heater and check it is functioning properly.

L If you notice irregular operation, damage to the heating element or to the structure of the appliance,

disconnect the product from the mains power supply and contact your technical assistance center or dealer.

8. Maintenance

 This heater does not require any particular maintenance.

 We recommend you clean the air inlet and air outlet grilles at least twice a year with a vacuum

cleaner, to remove dust from the motor and the heating elements.

 If the heater needs to be repaired, please contact an authorized center.

 If the cable is to be changed, please remember that a 2x1m

2

H05VV-F <HAR> cable must be used.

L

N

Electrical

t

it

Phase = brown

Neutral = blue

Product’s

d t

bl

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Steba Pikkolo Basic Värmefläkt. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Steba. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Steba Pikkolo Basic Värmefläkt på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Steba Värmefläktar
Fler bruksanvisningar för Värmefläktar

Vanliga frågor om Steba Pikkolo Basic Värmefläkt

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Steba KH7 Värmefläkt

Bruksanvisning

Steba Mirror 60 TH 2B Värmefläkt

Bruksanvisning

Steba KH5 Värmefläkt

Bruksanvisning

Steba Mirror 60 TH Värmefläkt

Bruksanvisning

Steba E-vent Värmefläkt

Bruksanvisning

Steba Pikkolo 60 T 3 Värmefläkt

Bruksanvisning

Steba KH1 Värmefläkt

Bruksanvisning

Domo DO7356CH Värmefläkt

Relaterade kategorier