Bruksanvisning Panasonic RP-WF6000H Hörlurar

Bruksanvisning

RQT8814

00

6

00

7

RQT8814

ENGLISH

6 7

The transmitter, with the RP-WF6000 transmitter/headphones system, has its own ID. When adding a set of the

RP-WF6000H headphones, the ID which is set in the transmitter must be registered in the headphones: otherwise,

the extra pair of headphones cannot be used.

1

Take the headphones of the transmitter

(not included).

The transmitter is ready to transmit.

3

Press and hold [ID/TUNING] on the

transmitter and [ID] on the headphones

(extra set) at the same time until the

transmitter’s ID/TUNING lamp (green)

flashes more than 5 times.

Push [ID] inwards.

After the ID/TUNING lamp (green) on the transmitter and

the OPR lamp

j (red) on the headphones flash more than

5 times (while [ID/TUNING] and [ID] are being pressed

down), the headphones will have registered the ID.

2

Put the added headphones (RP-WF6000H)

down onto your head.

The headphones turn on.

● Be sure to charge the rechargeable battery supplied with

the headphones or use alkaline dry cell batteries (not

included) before performing the registration.

Adding an extra set of headphones

Placement of headphones

The range of the radio waves

The radio waves have a maximum range of 30 m from the transmitter (not included).

The most appropriate frequency is automatically set when the headphones are taken off the transmitter. When

the headphones are used outside the range of the radio waves or the radio waves weaken, the sound is broken.

Move nearer to the transmitter or reset the frequency ( page 8 [Setting the most appropriate frequency]).

● Since this unit is using the 2.4 GHz radio frequency band, obstacles (such as reinforced concrete walls

and metal doors) may cause the sound to be broken. This is a characteristic of radio waves and not a

malfunction.

● The sound heard from the headphones will differ depending on where the transmitter is placed and the kind

of location in which it is used. We recommend placing the transmitter where the sound is received best.

● The sound may be broken when the unit is used at the same time as other equipment that uses the 2.4 GHz

radio frequency band such as wireless equipment or microwaves.

Locations

Avoid placing the unit in the following locations

- Places with high temperatures such as near heating appliances or places directly exposed to sunlight

- Places with a lot of dust

- On top of unstable carts or inclined surfaces

- Places with excessive vibration

- Bathrooms and other moisture-prone places

This unit uses radio waves to transmit the signals so use the headphones within the range of the radio waves.

Listening to audio

Before using the headphones, be sure to read [Connections] in the operating instructions of the RP-

WF6000 digital wireless surround headphones (sold separately) to ensure that the transmitter is connected

properly.

1

3

Take the headphones off the transmitter.

Turn on the equipment connected to the

transmitter (not included).

4

Put the headphones down onto your head.

Make sure that the headphones are facing so that the right

housing (R) goes over the right ear and the left housing (L) over

the left ear. Then put the headphones straight down onto your

head. Doing this will ensure that the auto power on/off function

( page 5) works correctly.

● The OPR lamp

j on the right housing k glows red and the

power automatically turns on.

2

Select the signal with [INPUT SELECT].

DIGITAL 1: To hear sound from equipment connected to the

transmitter’s DIGITAL IN 1 terminal.

DIGITAL 2: To hear sound from equipment connected to the

transmitter’s DIGITAL IN 2 terminal.

ANALOG: To hear sound from equipment connected to the

transmitter’s LINE IN terminal.

Note

● When watching movies, be careful not to turn up the volume too high during quiet scenes. The movie may

suddenly switch to a very noisy scene and you could damage your ears if the volume is raised too high.

● Avoid listening for prolonged periods of time to prevent hearing damage.

● Be sure to use the headphones within the range of the radio waves.

● Discontinue use if you experience discomfort. Continued use may cause rashes or other allergic reactions.

5

Start play on the equipment selected in step 2.

● The OPR/CHARGE lamp h on the transmitter will light

green and radio waves will be emitted. The most appropriate

frequency is automatically set.

6

Use [VOL] to adjust the volume.

● The volume is the same as when the headphones were

previously used.

● The volume will keep changing while the [VOL] control is

pushed to either side.

m To increase the volume

n To decrease the volume

DVD player and so on

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Panasonic RP-WF6000H Hörlurar. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Panasonic. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Panasonic RP-WF6000H Hörlurar på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Panasonic Hörlurar
Fler bruksanvisningar för Hörlurar

Vanliga frågor om Panasonic RP-WF6000H Hörlurar

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Panasonic RP-HC700 Hörlurar

Bruksanvisning

Panasonic RP-WF910E Hörlurar

Bruksanvisning

Panasonic RP-WF810 Hörlurar

Bruksanvisning

Panasonic RP-HC30 Hörlurar

Bruksanvisning

Panasonic RP-BTD10E Hörlurar

Bruksanvisning

Panasonic RP-HTX90N Hörlurar

Bruksanvisning

Panasonic RP-HF400B Hörlurar

Bruksanvisning

Panasonic RP-HC300 Hörlurar

Relaterade kategorier