
SPRAY GUN SAFETY WARNINGS
WARNING! When using mains-powered tools, basic safety precautions, including the
following, should always be followed to reduce risk of re, electric shock, personal injury
and material damage.
Readthewholemanualcarefullyandmakesureyouknowhowtoswitchthetooloinanemergency,before
operatingthetool.
Save these instructions and other documents supplied with this tool for future reference.
Theelectricmotorhasbeendesignedfor230Vand240Vonly.Alwayscheckthatthepowersupply
correspondstothevoltageontheratingplate.
Note:Thesupplyof230Vand240VonOzitotoolsareinterchangeableforAustraliaandNewZealand.
ThistoolisdoubleinsulatedinaccordancewithAS/NZS60745-1;
therefore no earth wire is required.
Ifthesupplycordofthispowertoolisdamaged,itmustbereplacedbyaspeciallypreparedcordavailable
throughtheserviceorganization.
Note:Doubleinsulationdoesnottaketheplaceofnormalsafetyprecautionswhenoperatingthistool.The
insulationsystemisforaddedprotectionagainstinjuryresultingfromapossibleelectricalinsulationfailure
within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the
extensionleadforsignsofdamage,wearandageing.Replacetheextensionleadifdamagedordefective.
Whenusinganextensionleadonareel,alwaysunwindtheleadcompletely.Useofanextensionleadnot
suitableforthepowerinputofthetoolorwhichisdamagedordefectivemayresultinariskofreandelectric
shock.
To reduce the risk of electrical shock, a residual current device (rated 30mA or less) must be used.
WARNING! Read all safety warnings and all instructions. Failuretofollowthewarningsand
instructionsmayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instructions for future reference. The term “power tool” in the
warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power
tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases or dust.Powertoolscreatesparkswhichmayignitethedustorfumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. Thereisanincreasedriskofelectricshockifyourbodyisearthedorgrounded.
c. Do not expose power tools to rain or wet conditions.Waterenteringapowertoolwillincreasethe
risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts.Damagedorentangledcordsincrease
the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A
momentofinattentionwhileoperatingpowertoolsmayresultinseriouspersonalinjury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask,non-skidsafetyshoes,hardhat,orhearingprotectionusedforappropriateconditionswillreduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the o-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carryingpowertoolswithyour
ngerontheswitchorenergisingpowertoolsthathavetheswitchoninvitesaccidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attachedtoarotatingpartofthepowertoolmayresultinpersonalinjury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts.Looseclothes,jewelleryorlonghaircanbecaughtinmovingparts.
g. If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct power tool
willdothejobbetterandsaferattherateforwhichitwasdesigned.
b. Do not use the power tool if the switch does not turn it on and o. Any power tool that cannot be
controlledwiththeswitchisdangerousandmustberepaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measuresreducetheriskofstartingthepowertoolaccidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.Powertoolsaredangerousinthehands
of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may aect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean.Properlymaintainedcuttingtoolswithsharpcuttingedgesare
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operationsdierentfromthoseintendedcouldresultinahazardoussituation.
5. Service
a. Have your power tool serviced by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
GENERAL POWER TOOL SAFETY WARNINGS
ELECTRICAL SAFETY
WARNING!
Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord.Cutting
accessorycontactinga“live”wiremaymakeexposedmetalpartsofthepowertool
“live“andcouldgivetheoperatoranelectricshock.
This appliance is not intended forusebypersons(includingchildren)withreduced
physical,sensoryormentalcapabilities,orlackofexperienceandknowledge,unless
theyhavebeengivensupervisionorinstructionconcerninguseoftheappliancebya
person responsible for their safety.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool.
Beforeuse,inspecttheextensionleadforsignsofdamage,wearandageing.
Replacetheextensionleadifdamagedordefective.
Whenusinganextensionleadonareel,alwaysunwindtheleadcompletely.Useof
anextensionleadnotsuitableforthepowerinputofthetoolorwhichisdamagedor
defectivemayresultinariskofreandelectricshock.
Itisrecommendedthattheextensionleadisamaximumof25minlength.DoNot
use multiple extension leads.
NEVER under any circumstances aim the nozzle at another person or animal.
•Intheeventofaninjuryoccurring,seekmedicaladviceimmediately.
•Thespraygunmustnotbeusedforsprayingammablepaintsandsolventswitha
ashpointoflessthan21ºC.
•Alwaysensurethereisadequateventilationwhenspraying.
• The use of ear protection is recommended.
• Eye protection is recommended to keep hazardous vapours and liquids out of eyes.
•Alwayswearafacemaskwhenspraying.
•Alwaysreadthepaintmanufacturersthinninginstructionsbeforeusing.
•Alwayskeepthespraybasketnozzleinplaceduringuse.Neverallowthesprayto
come in direct contact with the skin.
DANGER!Neverimmersethesprayguninliquid.Thiscouldleadtoelectric
shock,personalinjuryandmaterialdamage.
•Thespraygunmustnotbecleanedbyusingammableliquidswithaashpointof
lessthan21ºC.
NEVER spray near a naked ame, including an appliance pilot light.
NEVER smoke whilst spraying.
NEVER allow children to operate or play with the spray gun.
•Beforecleaning,alwaysdisconnecttheappliancefromthemainssupply.
•Alwaysdisconnectfrommainssupplywhenrellingthepaintpot.
•Aftereveryuseensureyoucleanyourspraygunthoroughly.
NEVER use the spray gun outside when it is raining.
Delta i konversationen om denna produkt
Här kan du dela vad du tycker om Ozito SGP-300 Färgspruta. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.