Bruksanvisning Makita EA4300F Kedjesåg

Bruksanvisning

5

S

TO

P

O

N

STOP

ON

6

5

7

9

8

Fuels / Refuelling

- Stop the engine before refuelling the chain saw.

- Do not smoke or work near open Þ res (5).

- Let the engine cool down before refuelling.

- Fuels can contain substances similar to solvents. Eyes and skin

should not come in contact with mineral oil products. Always wear

protective gloves when refuelling. Frequently clean and change

protective clothes. Do not breathe in fuel vapors. Inhalation of

fuel vapours can be hazardous to your health.

- Do not spill fuel or chain oil. When you have spilt fuel or oil im-

mediately clean the chain saw. Fuel should not come in contact

with clothes. If your clothes have come in contact with fuel,

change them ot once.

- Ensure that no fuel or chain oil oozes into the soil (environmental

protection). Use an appropriate base.

- Refuelling is not allowed in closed rooms. Fuel vapors will ac-

cumulate near the ß oor (explosion hazard).

- Ensure to Þ rmly tighten the screw plugs of the fuel and oil tanks.

- Change the place before starting the engine (at least 3 m from

the place of refuelling) (6).

- Fuel cannot be stored for an unlimited period of time. Buy only

as much as will be consumed in the near future.

- Use only approved and marked containers for the transport and

storage of fuel and chain oil. Ensure children have no access to

fuel or chain oil.

Putting into operation

- Do not work on your own. Another person must be nearby

in case of emergencies (within shouting distance).

- Ensure that there are no children or other people within the

working area. Pay attention to any animals in the working area,

as well (7).

- Before starting work the chain saw must be checked for

perfect function and operating safety according to the pre-

scriptions.

Check especially the function of the chain brake, the correct

mounting of the guide bar, the correct sharpening and tighten-

ing of the chain, the Þ rm mounting of the sprocket guard, the

easy motion of the throttle lever and the function of the throttle

lever lock, the cleanliness and dryness of the handles, and the

function of the ON/OFF switch.

- Put the chain saw only into operation if it is completely assembled.

Never use the chain saw when it is not completely assembled.

- Before starting the chain saw ensure that you have a safe footing.

- Put the chain saw into operation only as described in this instruc-

tion manual (8). Other starting methods are not allowed.

- When starting the chain saw it must be well supported and

securely held. The guide bar and chain must not be in contact

with any object.

- When working with the chain saw always hold it with both

hands. Take the back handle with the right hand and the tubu-

lar handle with the left hand. Hold the handles tightly with your

thumbs facing your Þ ngers.

- CAUTION: When releasing the throttle lever the chain will

keep on running for a short period of time (free-wheeling).

- Continuously ensure that you have a safe footing.

- Hold the chain saw such that you will not breathe in the exhaust

gas. Do not work in closed rooms (danger of poisoning).

- Switch off the chain saw immediately if you observe any

changes in its operating behavior.

- The engine must be switched off before checking the chain

tension, tightening the chain, replacing it or clearing mal-

functions (9).

- When the sawing device is hit by stones, nails or other hard

objects, switch off the engine immediately and check the

sawing device.

- When stopping work or leaving the working place switch off the

chain saw (9) and put it down such that nobody is endangered.

CAUTION: Do not put the overheated power chain

saw in dry grass or on any inß ammable objects.

The mufß er is very hot (danger of Þ re).

- CAUTION: Oil dropping from the chain or guide bar after hav-

ing stopped the saw chain will pollute the soil. Always use an

appropriate base.

● Maintenance ● Stopping work

● Refuelling ● Transport

● Sharpening the chain ● Putting out of function

3 Meter

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita EA4300F Kedjesåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita EA4300F Kedjesåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Kedjesågar
Fler bruksanvisningar för Kedjesågar

Vanliga frågor om Makita EA4300F Kedjesåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita DCS510 Kedjesåg

Bruksanvisning

Makita DUC307 Kedjesåg

Bruksanvisning

Makita DUC405Z Kedjesåg

Bruksanvisning

Makita DUC252Z Kedjesåg

Bruksanvisning

Makita DUC122 Kedjesåg

Bruksanvisning

Makita UC4551A Kedjesåg

Bruksanvisning

Makita UC3051A Kedjesåg

Bruksanvisning

Makita DUC355Z Kedjesåg

Relaterade kategorier