Bruksanvisning Makita BFT121F Skruvdragare

Bruksanvisning

5

part cannot be seen. If not, it may accidentally fall

out of the tool, causing injury to you or someone

around you.

Charging

Before using battery charger, read all instructions and

cautionary markings on the battery charger.

Tips for maintaining maximum battery life

1. Always stop tool operation and charge the battery

cartridge when you notice that the LED indicator

lightened up.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10°C - 40°C (50°F - 104°F).

Let a hot battery cartridge cool down before

charging it.

4. Charge the Nickel Metal Hydride battery cartridge

when you do not use it for more than six months.

Refresh charging

• Refreshing adapter (optional accessory) can

refresh an inactive battery cartridge.

• Refresh charging should be done once a week.

• When you charge a new battery cartridge or a

battery cartridge that has not been used for a long

time, it may not accept a full charge. In this case,

refresh charging must be done. The battery

cartridge may decrease the tool perfor-mance,

because the chemical substance of the battery

cartridge is inactive.

Checking the remaining battery capacity

For Battery 9020A/9033A

Indicating lamp

(C) E F

Capacity

80% - 100%

60% - 80%

40% - 60%

10% - 40%

0% - 10%

Indicating lamp

Capacity

80% - 100%

60% - 80%

40% - 60%

10% - 40%

0% - 10%

EF

orange

orange

001254

When charging

When the charging begins, the first (far left) indicating

lamp begins to flicker. Then, as charging proceeds, the

other lamps light, one after the other, to indicate the

battery capacity.

When using

When the tool is switched on, the lamps will light to

indicate the remaining battery capacity. When the tool is

switched off, the light goes out. If the battery has not

been used for a long time, or is needed refresh charging,

the orange lamp begins to flicker. Use Makita refreshing

adapter to refresh the battery.

CAUTION:

• A battery cartridge extracted from the charger that

has been unplugged with the battery cartridge

inserted does not indicate the battery capacity due

to its protective function even if the tool is switched

on after the battery insertion into the tool. At this

time, recharge it for about five seconds before use.

NOTE:

• Please contact Makita Authorized or Factory

Service Center if the warning lamp of the battery

cartridge does not light up when using or charging.

Switch action

Fig.3

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger

actuates properly and returns to the "OFF" position

when released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

Lighting up front lamp

For models BFT120F/BFT121F only

Fig.4

CAUTION:

• Do not look in the light or see the source of light

directly.

Pull the switch trigger to light up the front lamp. The

lamp keeps on lighting while the switch trigger is being

pulled. The light automatically goes out 10 seconds after

the switch trigger is released.

Reversing switch action

Fig.5

CAUTION:

• Always check the direction of rotation before

operation.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of

rotation before the tool stops may damage the tool.

• When not operating the tool, always set the

reversing switch lever to the neutral position.

This tool has a reversing switch to change the direction

of rotation. Move the reversing switch lever to

the

position (A side) for clockwise rotation or

the

position (B side) for counterclockwise rotation.

When the reversing switch lever is in the neutral position,

the switch trigger cannot be pulled.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita BFT121F Skruvdragare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita BFT121F Skruvdragare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Skruvdragare
Fler bruksanvisningar för Skruvdragare

Vanliga frågor om Makita BFT121F Skruvdragare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita DFS452 Skruvdragare

Bruksanvisning

Makita DFR550 Skruvdragare

Bruksanvisning

Makita DFL651F Skruvdragare

Bruksanvisning

Makita BFL120F Skruvdragare

Bruksanvisning

Makita DFL201F Skruvdragare

Bruksanvisning

Makita DFT023F Skruvdragare

Bruksanvisning

Makita DFS251 Skruvdragare

Bruksanvisning

Makita DFT086F Skruvdragare

Relaterade kategorier