Bruksanvisning Makita BFT121F Skruvdragare

Bruksanvisning

4

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product

using battery.

3. CAUTION - To reduce risk of injury, charge

only MAKITA type rechargeable batteries.

Other types of batteries may burst causing

personal injury and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or

sold by the battery charger manufacturer may

result in a risk of fire, electric shock, or injury

to persons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when

disconnecting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise

subjected to damage or stress.

8. Do not operate charger with damaged cord or

plug - replace them immediately.

9. Do not operate charger if it has received a

sharp blow, been dropped, or otherwise

damaged in any way; take it to a qualified

serviceman.

10. Do not disassemble charger or battery

cartridge; take it to a qualified serviceman

when service or repair is required. Incorrect

reassembly may result in a risk of electric

shock or fire.

11. To reduce risk of electric shock, unplug

charger from outlet before attempting any

maintenance or cleaning. Turning off controls

will not reduce this risk.

12. The battery charger is not intended for use by

young children or infirm persons without

supervision.

13. Young children should be supervised to

ensure that they do not play with the battery

charger.

14. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

15. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical

attention right away. It may result in loss of

your eyesight.

ADDITIONAL SAFETY RULES

FOR CHARGER & BATTERY

CARTRIDGE

1. Do not charge battery cartridge when

temperature is BELOW 10 ﾟ C (50 ﾟ F) or

ABOVE 40 ﾟ C (104 ﾟ F).

2. Do not attempt to use a step-up transformer,

an engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a

container with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

flow, overheating, possible burns and

even a breakdown.

5. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 ﾟ C(122 ﾟ F).

6. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

7. Be careful not to drop, shake or strike battery.

8. Do not charge inside a box or container of any

kind. The battery must be placed in a well

ventilated area during charging.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checking function on the tool.

Installing or removing battery cartridge

• Always switch off the tool before insertion or

removal of the battery cartridge.

• Do not use force when inserting the battery

cartridge. If the cartridge does not slide in easily, it

is not being inserted correctly.

For models BFT120(F)

Fig.1

• To remove the battery cartridge, withdraw it from

the tool while pressing the buttons on both sides of

the cartridge.

• To insert the battery cartridge, align the tongue on

the battery cartridge with the groove in the housing

and slip it into place. Always insert it all the way

until it locks in place with a little click. If not, it may

accidentally fall out of the tool, causing injury to

you or someone around you.

For model BFT121F

Fig.2

• To remove the battery cartridge, withdraw it from

the tool while sliding the button on the side of the

cartridge.

• To insert the battery cartridge, align the tongue on

the battery cartridge with the groove in the housing

and slip it into place. Always insert it all the way

until it locks in place with a little click. If you can

see the red part on the upper side of the button, it

is not locked completely. Insert it fully until the red

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita BFT121F Skruvdragare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita BFT121F Skruvdragare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Skruvdragare
Fler bruksanvisningar för Skruvdragare

Vanliga frågor om Makita BFT121F Skruvdragare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita DFS452 Skruvdragare

Bruksanvisning

Makita DFR550 Skruvdragare

Bruksanvisning

Makita DFL651F Skruvdragare

Bruksanvisning

Makita BFL120F Skruvdragare

Bruksanvisning

Makita DFL201F Skruvdragare

Bruksanvisning

Makita DFT023F Skruvdragare

Bruksanvisning

Makita DFS251 Skruvdragare

Bruksanvisning

Makita DFT086F Skruvdragare

Relaterade kategorier