Bruksanvisning Hikoki CJ 18DSL Sticksåg

Bruksanvisning

3

English

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease.

Slippery handles and grasping surfaces do not

allow for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specifi ed by the

manufacturer.

A charger that is suitable for one type of battery pack

may create a risk of fi re when used with another

battery pack.

b) Use power tools only with specifi cally

designated battery packs.

Use of any other battery packs may create a risk of

injury and fi re.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another.

Shorting the battery terminals together may cause

burns or a fi re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, fl ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

e) Do not use a battery pack or tool that is damaged

or modifi ed.

Damaged or modifi ed batteries may exhibit

unpredictable behaviour resulting in fi re, explosion

or risk of injury.

f) Do not expose a battery pack or tool to fi re or

excessive temperature.

Exposure to fi re or temperature above 130 °C may

cause explosion.

g) Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specifi ed in the instructions.

Charging improperly or at temperatures outside

the specifi ed range may damage the battery and

increase the risk of fi re.

6) Service

a) Have your power tool serviced by a qualifi ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

b) Never service damaged battery packs.

Service of battery packs should only be performed

by the manufacturer or authorized service providers.

PRECAUTION

Keep children and infi rm persons away.

When not in use, tools should be stored out of reach of

children and infi rm persons.

CORDLESS JIG SAW SAFETY

WARNINGS

1. Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give the

operator an electric shock.

2. Use clamps or another practical way to secure and

support the workpiece to a stable platform.

Holding the workpiece by hand or against your body

leaves it unstable and may lead to loss of control.

ADDITIONAL SAFETY WARNINGS

1. Always charge the battery at a temperature of 0 oC –

40 oC. A temperature of less than 0 oC will result in over

charging which is dangerous. The battery cannot be

charged at a temperature higher than 40o C.

The most suitable temperature for charging is that of

20 oC – 25 oC.

2. Do not use the charger continuously.

When one charging is completed, leave the charger for

about 15 minutes before the next charging of battery.

3. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

4. Never disassemble the rechargeable battery and

charger.

5. Never short-circuit the rechargeable battery.

Shortcircuiting the battery will cause a great electric

current and overheat. It results in burn or damage to the

battery.

6. Do not dispose of the battery in fi re. If the battery is burnt,

it may explode.

7. Do not insert object into the air ventilation slots of the

charger. Inserting metal objects or infl ammables into the

charger air ventilation slots will result in electrical shock

hazard or damaged charger.

8. Bring the battery to the shop from which it was purchased

as soon as the post-charging battery life becomes too

short for practical use. Do not dispose of the exhausted

battery.

9. If the machine is used continuously at low speed, an

extra load is applied to the motor which can result in

motor seizure. Always operate the power tool so that

the blade is not caught by the material during operation.

Always adjust the blade speed to enable smooth cutting.

10. Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than

by hand.

11. Preparing and checking the work environment. Make

sure that the work site meets all the conditions laid forth

in the precautions.

12. Make sure that the battery is installed fi rmly. If it is at all

loose it could come off and cause an accident.

13. Dust produced in operation

The dust produced in normal operation may aff ect

the operator’s health. Either of following way is

recommended.

a) Wear a dust mask

b) Use external dust collection equipment

When using the external dust collection equipment,

connect the adapter with the hose from external dust

collection equipment.

14. Changing blades

○ Be sure to switch power OFF and disconnect the battery

from the body when changing blades.

○ Do not open the lever when plunger is moving. (Fig. 3)

○ Confi rm the protrusions of blade inserted to the blade

holder surely. (Fig. 3)

○ Confi rm the blade located between the groove of roller.

(Fig. 3)

15. Always make sure to push in the lock off button to the

locked position when not using.

16 Do not look directly into the light from the LED lamp.

Continuous and direct exposure to the light from the LED

lamp can injure your eyes.

17. Using the splinter guard when cutting wood materials will

reduce splintering of cut surfaces.

Insert the splinter guard in the space on the base, and

push it completely.

0000Book̲CJ18DSL.indb30000Book̲CJ18DSL.indb3 2019/07/2518:54:362019/07/2518:54:36

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Hikoki CJ 18DSL Sticksåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Hikoki. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Hikoki CJ 18DSL Sticksåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Hikoki Sticksågar
Fler bruksanvisningar för Sticksågar

Vanliga frågor om Hikoki CJ 18DSL Sticksåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Hikoki CJ 110MV Sticksåg

Bruksanvisning

Hikoki CJ 18DA Sticksåg

Bruksanvisning

Hikoki CJ 36DB Sticksåg

Bruksanvisning

Parkside PSSPA 20-Li A1 Sticksåg

Bruksanvisning

FERM JSM1018 Sticksåg

Bruksanvisning

Pattfield PE-550ST Sticksåg

Bruksanvisning

Meec Tools 019-058 Sticksåg

Bruksanvisning

Einhell TC-JS 60/1 Sticksåg

Relaterade kategorier