Home > Telecommunikation > Walkie-talkie > Exibel Walkie-talkie > Exibel FX-122 Walkie-talkie

Bruksanvisning Exibel FX-122 Walkie-talkie

Behöver du en bruksanvisning för din Exibel FX-122 Walkie-talkie? Nedan kan du se och ladda ner PDF-bruksanvisningen gratis på svenska. Den här produkten har för närvarande 0 vanliga frågor, 0 kommentarer och har 0 röster. Om det här inte är bruksanvisningen du vill ha, vänligen kontakta oss.

Är produkten defekt och erbjuder bruksanvisningen ingen lösning? Gå till ett Repair Café för gratis reparationstjänster.

Bruksanvisning

Declaration of Conformity

Hereby, Clas Ohlson AB,

declares that following product(s):

38-3789 EXIBEL FX-122

PMR Communication radio

is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC.

Article 3.1a (Safety): EN 60950-1

Article 3.1b (EMC): EN 301489-1

EN 301489-5

Article 3.2 (Radio): EN 300296-2

Insjön, Sweden, May 2010

Klas Balkow

President

Clas Ohlson, 793 85 Insjön, Sweden

4.4.5 Monitoring the activated channel (Monitor)

The radio does not normally pick up very weak signals

(static suppressor is activated), but you can shut the static

suppressor and listen to weak signals.

a. Press and hold down the buttons [MENU] and [▼] at

the same time. The radio opens the static suppressor

and allows any trafﬁc to get through. If there is no trafﬁc,

a buzz is heard on the channel.

b. Press [MENU] once to shut off the speakers again.

4.5 Voice-controlled transmission (VOX)

In the VOX-position the radio transmits every time it

recognises the user’s voice without the user having to

press [PTT].

The VOX-position is mostly to be used when you attach

a headset to the device. Connect the headset to the jack

on the top of the radio.

a. Press [MENU] four times. The text ”VOX” appears

at the bottom of the display.

b. Select VOX-level (1-3 and off (OF)) with the buttons

[▲] and [▼].

OF Off. Transmission only possible with [PTT].

1 Transmission needs a very loud sound to be

activated. Good in noisy environments.

2 Transmission needs loud sound to be activated.

3 Transmission needs a relatively low sound to be

activated. Good in normal environment.

c. Press [MENU] to continue choosing settings or

press [PTT] to conﬁrm and end.

d. “VOX” remains on the display as long as the function

remains activated.

4.6 Activating Auto Channel Scan

The radio can automatically scan for channels with trafﬁc.

When a carrier wave is received scanning stops and the

radio begins receiving. Scanning then continues automati-

cally when the carrier wave has stopped. 8 channels,

38 CTCSS-codes and all 83 DCS-codes.

Channel scan (8 channels)

a. Press [MENU] ﬁve times. The display blinks “SC”.

b. Press [▲] or [▼] to start channel scan over the

8 channels.

c. “SC” is illumined continuously on the display and

the channel indicator runs through the channels

consecutively. Scanning stops when a carrier wave is

received and resumes when the wave has faded out.

d. Press [PTT] at any time to interrupt the scan.

Scanning (38 CTCSS codes)

a. Press [MENU] six times. “STCSS” blinks in the display.

b. Press [▲] or [▼] to start channel scanning over 38

CTCSS-codes.

Scanning (83 DCS codes)

c. Press [MENU] seven times. “DCS” blinks in the display.

a. Press [▲] or [▼] to start channel scanning over the

83 DCS-codes.

4.7 Activating the timing function

Radio has a timing function (stopwatch).

a. Press and hold [CALL]. “00” appears on the display.

b. Press [▲] to start stopwatch.

c. Press [▲ to stop timing temporarily. Press once

to continue timing.

d. Press [▼] to stop timing and set time to zero.

e. Press and hold [CALL] to stop timing and return

to normal display reading.

4.8 Tone signal

To alert other users that you want to communicate you can

send a call signal to them. However, for this the receiving

radios must be within range and be tuned to the same

channel and subtone.

4.8.1 Calling with tone signal

Press [CALL] and release. The transmission indicator

“TX” lights up and the call signal sounds for ca 2 seconds.

All radios within range and with the same channel and

subtone set will hear the ringtone.

4.8.2 Select call signal

a. Press [MENU] eight times. The text “CA” appears and

the display blinks “01”.

b. Press [▲] or [▼] to choose among the 10 different

signals. The selected ringtone sounds until you skip

to the next signal.

c. Conﬁrm by pressing [PTT].

d. To send a call signal, press [CALL] and release.

The transmission indicator lights up and the call

signal sounds for ca 2 seconds.

4.8.3 Roger-Beep

When “Roger-Beep” is activated the receiving party

hears a short beep from your message as soon as you

release [PTT].

a. Press [MENU] nine times. “ro” blinks on the display.

b. Press [▲] or [▼] to turn the function on or off (of).

c. Conﬁrm by pressing [PTT].

4.9 Button tones

a. Press [MENU] ten times. The text “to” appears

on the display.

b. Press [▲] or [▼] to turn button tones on (on) or off (of).

c. Conﬁrm by pressing [PTT].

4.10 Monitoring of two channels

a. Press [MENU] eleven times. “DCM” lights up and the

display blinks “of”.

b. Press [▲] or [▼] to select which channel (1-8) is to be

monitored (in addition to selected channel).

c. Press [MENU] to conﬁrm and to select CTCSS subtone.

d. Select subtone (1-38) with the buttons [▲] and [▼]

(“00” shuts off subtone). Press [MENU] to conﬁrm.

e. Select digital subtone with buttons [▲] and [▼] (“00”

shuts off digital subtone). Conﬁrm by pressing [PTT].

• The text ”DCM” now appears on the display and the

channel number shifts between the tuned-in channel

and the channel you now wish to monitor appears in

the display. The radio stops on the channel where there

is trafﬁc and then continues to monitor both channels

again when trafﬁc stops.

5. Other functions

5.1 Button lock

When the button lock is activated you can use [PTT] and

[POWER] but you cannot change the volume or use the

[MENU] button.

Locking buttons

Hold [MENU] button down until a dual tone is heard and

the key symbols appear in the display. The lock button

is now activated.

Unlocking buttons

Hold the [MENU] button down until a dual tone is heard

and the key symbol disappears. The buttons can now

be used again.

5.2 Display lighting

Each time a button is pressed (except for [PTT] and [CALL])

the display backlighting lights up and extinguishes again

after circa 4 seconds.

5.3 Headset jack

• A headset jack is located on the radio face (under

a rubber cover).

• Use only accessories designed for this product.

6. Troubleshooting

Poor or no reception-transmission

• Transmitter is outside receiver’s range.

• The transmitting or receiving party is tuned to

a different channel or subtone.

• The sound is too low – raise the volume.

• The surroundings are affecting reception – move to

a spot where there is no obstruction or source of

interference, preferably as high as possible.

• The radio is being held too close to the body. – Hold the

radio slightly away from the body.

• The other user is too close – maintain a distance of at

least 1.5 m between yourself and the other person.

• There are other users are interfering in the channel –

agree to use another channel.

Cannot change channels

Button lock is activated – deactivate button lock.

Radio transmits continuously in VOX-position

Backlighting is so strong that it activates transmitter –

change the VOX-position or go to a quieter spot.

Radio does not transmit at all in VOX-position

VOX level is too low – Set higher level.

You are speaking too softly or you are too far away

from the microphone – speak more loudly or closer

to microphone.

7. Care and maintenance

Use a soft, dry cloth to clean the unit. Do not use deter-

gents containing alcohol, ammonia, gasoline, or abrasives

as they can damage the casing.

8. Disposal

Make sure you comply with local regulations when

discarding the device. If you are not sure what to do,

contact your local authorities.

9. Specifications

Radio

Number of channels: 8

Number of subtones (CTCSS): 38 for every channel

Number of digital subtones (DCS): 83

Frequency range: 446.00625 – 446.09375 MHz

Output: 500 mW

Range: to 8 km

Frequency

Channel Frequency (MHz) Channel Frequency (MHz)

1 446.00625 5 446.05625

2 446.01875 6 446.06875

3 446.03125 7 446.08125

4 446.04375 8 446.09375

Charger

Operating voltage: 7,5 V DC / 750 mA via power adapter.

Mains voltage, power adapter: 230 V AC, 50 Hz

Betyg

Berätta vad du tycker om Exibel FX-122 Walkie-talkie genom att betygsätta den. Vill du dela med dig av dina åsikter om denna produkt eller ställa en fråga? Lämna en kommentar nederst på sidan.

Är du nöjd med Exibel FX-122 Walkie-talkie?
Ja Nej

Bli den första personen som betygsätter denna produkt

0 röster

Delta i konversationen om denna produkt

Här kan du dela vad du tycker om Exibel FX-122 Walkie-talkie. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Exibel FX-122 Walkie-talkie. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Exibel. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Exibel FX-122 Walkie-talkie på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.