Bruksanvisning Caliber MCC110 Bilradio

Bruksanvisning

7.AF [ALTERNATIVE FREQUENCIES]

When pressed short,AF switching mode is selected and the state of AF switching mode is

displayed by AF segment in display.

Segment off:AF switching mode off.

Segment on:AF switching mode on, and has RDS information.

Segment flashing:AF switching mode is selected, but no RDS information is received yet.

When AF switching mode is selected, the radio checks the signal strength of AF constantly.The

interval of checking time of each AF depends on the signal strength of current station, from a few

minutes for a strong station to a few seconds for a weak station. Every time that a new AF is

stronger than current station, it switches over to that frequency for very short time, and NEW

FREQUENCY is displayed for 1-2 seconds. Because the mute time of AF switching or checking

time is very short, it is almost inaudible in case of normal program.

When pressed long, regional mode ON/OFF is activated.

REGIONAL MODE ON:

AF switching or PI SEEK is implemented to the station from which all PI codes are similar to the

current station. REG of individual segment is turned on also, together with displaying REG ON

on numeric display for a few seconds.

* In this double displaying mode, the some type may not be dislayed in case of not enough-space

type of display.

REGIONAL MODE OFF:

The regional code in the format of PI code is ignored when AF switching or PI SEEK is

implemented. REG of individual segment is turned off together with displaying REG OFF on

numeric display for a few seconds.

8.AUTO SEARCH TUNING(AS/PS) BUTTON

Press it to display all stations memory for 5 seconds each time, while memory digital and

frequency will flash on LCD. If the button is pressed for more than 2 seconds, it will seek station

on current band, then write to the preset memories.

When the auto-storage operation is completed, it will automatically display for 5

seconds each time. During the memory station performing, press 1-6 digital buttons

to select and stop scanning function.

9.RESET BUTTON

Press it to rehabilitate the state when the program are distorted.

10,11. SOUND MODE AND ADJUSTMENT BUTTONS

Press SEL button repeatedly to select the one mode of BASS,TRE, BAL, FADER and VOL

(defaulted), and then press + or - button to adjust level of selected mode.

12.LCD (LIQUID CRYSTAL DISPLAY)

13.MODE

Press it to change into TAPE PLAY mode from RADIO mode.

14.TA function [TRAFFIC ANNOUNCEMENT] BUTTON

When pressed short, it is activated as TA mode on or off.

When TA mode is on and traffic announcement is transmitted:

1).When the unit is in TAPE mode, it will switch to radio mode temporarily.

GB 2

USER MANUAL

LOCATION AND FUNCTION OF CONTROLS

1. RELEASE BUTTON

2. BAND BUTTON

Press it to change into RADIO mode from TAPE mode, then press it repeatedly to select your

desired radio band.

3. PTY(PROGRAM TYPE) BUTTON

Press it to turn on or off PTY mode.

While selecting PTY TYPE, its selection is made by preset buttons as described in preset key

item.

When PTY is selected, the radio starts to search corresponding PTY information, and stops if the

corresponding PTY information is detected.

If corresponding PTY information does not exist any more, PTY type is automatically exit to

normal mode.

4. POWER BUTTON

Press it to turn on or off the unit.

5. PRESET STATION [ 1-6 ] BUTTONS

In normal radio mode:

A).If you press one of the preset buttons more than one second, the current station is stored in

the preset memory bank.

B].To recall a preset memory, press one of the preset buttons [1-6].

In PTY radio mode, the function of preset buttons is assigned according to the following list:

DIGITAL BUTTON - PROGRAM

1 - NEWS 2 - INFO

3 - SPORT 4 - POP M

5 - ROCK M 6 - CLASSICS M

6. RW/FF PROGRAM BUTTONS

When in TAPE mode, press RW or FF button to fast rewind or forward the tape, and press one

of them again to stop the fast forward or rewind.

When in TAPE mode, press them together at the same time to switch from one side of the tape

to the other side.

GB 1

USER MANUAL

411 13

14

6

16 17 122 8 18

10

5

3

19

1

7

15

MCC_110manualOUTLINES 18-03-2005 11:47 Pagina 1

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Caliber MCC110 Bilradio. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Caliber. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Caliber MCC110 Bilradio på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Caliber Bilradio
Fler bruksanvisningar för Bilradio

Vanliga frågor om Caliber MCC110 Bilradio

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Caliber RCD236DAB-BT Bilradio

Bruksanvisning

Caliber MCC100 Bilradio

Bruksanvisning

Caliber MCD171 Bilradio

Bruksanvisning

Sony XAV-AX6050 Bilradio

Bruksanvisning

Sony CDX-CA750X Bilradio

Bruksanvisning

Sony DSX-A40UI Bilradio

Bruksanvisning

Sony CDX-M700R Bilradio

Bruksanvisning

Sony CDX-C4900R Bilradio

Relaterade kategorier