Bruksanvisning Black and Decker KS777 Sticksåg

Bruksanvisning

6

ENGLISH

Labels on tools

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

 This appliance is not intended for use by young or infirm

persons without supervision. Children must be

supervised to ensure they do not play with the

appliance.

 If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. Lock-on button

2. Variable speed on/off switch

3. Blade storage compartment cover

4. Shoe plate

5. Blade support roller

6. Tool-free blade clamp

Assembly

Warning! Before attempting any of the following

operations, make sure that the tool is switched off and

unplugged and that the saw blade has stopped. Used saw

blades may be hot.

Fitting the saw blade (fig. A)

 Hold the saw blade (7) as shown, with the teeth facing

forward.

 Push and hold the blade clamp (6) down.

 Insert the shank of the saw blade into the blade holder

(8) as far as it will go.

 Release the blade clamp (6).

Saw blade storage (fig. B)

Saw blades (7) can be stored in the storage compartment

located on the side of the tool.

 Open the cover (3) of the saw blade storage

compartment by holding the tab on the top of the cover

(3) and pulling it outward.

 The blades are retained in the compartment by a

magnetic strip. To remove a blade, press down on one

end of the blade to raise the other end, and remove.

 Close the cover (3) of the saw blade storage

compartment and make sure that it is latched closed.

Warning! Close the compartment door securely before

operating the saw.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or

accessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Use

Adjusting the shoe plate for bevel cuts (fig. C)

The shoe plate (4) can be set to make either a straight cut or

a left or right bevel cut at an angle of 45°.

 Loosen the screws (9).

 Pull the shoe plate (4) forward, rotate the shoe plate (4) to

the left or right and push it back into the 45° location.

 Tighten the screws (9).

To reset the shoe plate for straight cuts:

 Loosen the screws (9).

 Pull the shoe plate (4) forward, rotate to the centre and

push it back into the 0° location.

 Tighten the screws (9).

Variable speed control

The tool has a variable speed on/off switch (1). The

operating speed depends on how far you press the switch.

 Use a high speed for wood, medium speed for aluminium

and PVC and low speed for metals other than aluminium.

Switching on and off

 To switch the tool on, press the variable speed on/off

switch (2).

 To switch the tool off, release the variable speed on/off

switch (2).

 For continuous operation, press the lock-on button (1)

and release the on/off switch (2).

 To switch the tool off when in continuous operation,

press the on/off switch (2) and release it.

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Black and Decker KS777 Sticksåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Black and Decker. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Black and Decker KS777 Sticksåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Black and Decker Sticksågar
Fler bruksanvisningar för Sticksågar

Vanliga frågor om Black and Decker KS777 Sticksåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Black and Decker KS634 Sticksåg

Bruksanvisning

Black and Decker KS950SLW Sticksåg

Bruksanvisning

Black and Decker KS800SL Sticksåg

Bruksanvisning

Black and Decker BDJIG520 Sticksåg

Bruksanvisning

Black and Decker KS700PE Sticksåg

Bruksanvisning

Black and Decker KS100K Sticksåg

Bruksanvisning

Black and Decker KFBES500 Sticksåg

Bruksanvisning

Black and Decker AST8XC Sticksåg

Relaterade kategorier