Bruksanvisning Black and Decker CD714CRES Slagborrmaskin

Bruksanvisning

7

ENGLISH

 If the supply cord is damaged, it must be re-

placed by the manufacturer or an authorised

Black & Decker Service Centre in order to avoid

a hazard.

Features

1. Variable speed switch

2. Lock-on button

3. Forward/reverse button

4. Drilling mode selector

5. Chuck

6. Depth stop (not all models)

7. Side handle (not all models)

fi g. B

8. Manual spindle lock button (single sleeve key-

less chuck only)

Assembly

Warning! Before assembly, make sure that the tool

is switched off and unplugged.

Fitting the side handle and depth stop (fi g. A)

 Turn the grip counter clockwise until you can

slide the side handle (7) onto the front of the

tool as shown.

 Rotate the side handle into the desired posi-

tion.

 Insert the depth stop (6) into the mounting hole

as shown.

 Set the drilling depth as described below.

 Tighten the side handle by turning the grip

clockwise.

Fitting a drill bit

Single sleeve keyless chuck (fi g. B)

 Open the chuck by pressing the manual spindle

lock button (8) and turning the sleeve (9) counter

clockwise.

 Insert the bit shaft (12) into the chuck.

 Firmly tighten the chuck by pressing the manual

spindle lock button (8) and turning the sleeve

clockwise until it is tight.

Two sleeve keyless chuck (fi g. C)

 Open the chuck by turning the sleeve (13) coun-

ter clockwise.

 Insert the bit shaft (12) into the chuck and fi rmly

tighten the chuck.

Keyed chuck (fi g. D)

 Open the chuck by turning the sleeve (11) coun-

ter clockwise.

 Insert the bit shaft (12) into the chuck.

 Insert the chuck key (14) into each hole (15) in

the side of the chuck and turn clockwise until

tight.

Removing and refi tting the chuck (fi g. E)

 Open the chuck as far as possible.

 Remove the chuck retaining screw, located

in the chuck, by turning it clockwise using

a screwdriver.

 Tighten an Allen key into the chuck and strike it

with a hammer as shown.

 Remove the Allen key.

 Remove the chuck by turning it counter clock-

wise.

 To refi t the chuck, screw it onto the spindle and

secure it with the chuck retaining screw.

Residual risks

Additional residual risks may arise when using the

tool which may not be included in the enclosed

safety warnings. These risks can arise from misuse,

prolonged use etc.

Even with the application of the relevant safety

regulations and the implementation of safety de-

vices, certain residual risks cannot be avoided.

These include:

 Injuries caused by touching any rotating/moving

parts.

 Injuries caused when changing any parts,

blades or accessories.

 Injuries caused by prolonged use of a tool. When

using any tool for prolonged periods make sure

you take regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust devel-

oper when using your tool (example:- working

with wood, especially oak, beech and MDF).

Use

Warning! Let the tool work at its own pace. Do not

overload.

Warning! Before drilling into walls, fl oors or ceilings,

check for the location of wiring and pipes.

Selecting the direction of rotation (fi g. F)

For drilling and for tightening screws, use forward

(clockwise) rotation. For loosening screws or re-

moving a jammed drill bit, use reverse (counter

clockwise) rotation.

 To select forward rotation, push the forward/re-

verse button (3) to the left position.

 To select reverse rotation, push the forward/re-

verse button to the right.

Warning! Never change the direction of rotation

while the motor is running.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Black and Decker CD714CRES Slagborrmaskin. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Black and Decker. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Black and Decker CD714CRES Slagborrmaskin på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Black and Decker Slagborrmaskiner
Fler bruksanvisningar för Slagborrmaskiner

Vanliga frågor om Black and Decker CD714CRES Slagborrmaskin

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Black and Decker KR400 Slagborrmaskin

Bruksanvisning

Black and Decker KR70LSR Slagborrmaskin

Bruksanvisning

Black and Decker KD355 Slagborrmaskin

Bruksanvisning

Black and Decker KD352CRE Slagborrmaskin

Bruksanvisning

Black and Decker KR50CRE Slagborrmaskin

Bruksanvisning

Black and Decker KR7532K Slagborrmaskin

Bruksanvisning

Black and Decker KD351RE Slagborrmaskin

Bruksanvisning

Black and Decker AST1 Slagborrmaskin

Relaterade kategorier