Bruksanvisning Black and Decker CD714CRES Slagborrmaskin

Bruksanvisning

6

ENGLISH

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage of

parts and any other condition that may affect

the power tools operation. If damaged, have

the power tool repaired before use. Many ac-

cidents are caused by poorly maintained power

tools.

f. Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations different from those

intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualifi ed

repair person using only identical replace-

ment parts. This will make sure that the safety

of the power tool is maintained.

Additional power tool safety warnings

Warning! Additional safety warnings for

drills and impact drills.

 Wear ear protectors with impact drills. Ex-

posure to noise can cause hearing loss.

 Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

 Hold power tool by insulated gripping sur-

faces when performing an operation where

the fastener may contact hidden wiring or

its own cord. Fasteners contacting a "live" wire

may make exposé metal parts of the power tool

"live" and could give the operator an electric

shock.

 Use clamps or another practical way to se-

cure and support the workpiece to a stable

platform. Holding the work by hand or against

your body leaves it unstable and may lead to

loss of control.

 Before drilling into walls, fl oors or ceilings, check

for the location of wiring and pipes.

 Avoid touching the tip of a drill bit just after drill-

ing, as it may be hot.

 The intended use is described in this instruction

manual. The use of any accessory or attachment

or performance of any operation with this tool

other than those recommended in this instruc-

tion manual may present a risk of personal injury

and/or damage to property.

Safety of others

 This tool is not intended for use by persons (in-

cluding children) with reduced physical, sensory

or mental capabilities, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of

the appliance by a person responsible for their

safety.

 Children should be supervised to ensure that

they do not play with the appliance.

Vibration

The declared vibration emission values stated in

the technical data and the declaration of conformity

have been measured in accordance with a standard

test method provided by EN 60745 and may be

used for comparing one tool with another. The de-

clared vibration emission value may also be used in

a preliminary assessment of exposure.

Warning! The vibration emission value during actual

use of the power tool can differ from the declared

value depending on the ways in which the tool is

used. The vibration level may increase above the

level stated.

When assessing vibration exposure to determine

safety measures required by 2002/44/EC to protect

persons regularly using power tools in employment,

an estimation of vibration exposure should consider,

the actual conditions of use and the way the tool is

used, including taking account of all parts of the

operating cycle such as the times when the tool is

switched off and when it is running idle in addition

to the trigger time.

Labels on tools

The following pictograms are shown on the tool.

Warning! To reduce the risk of injury, the

user must read the instruction manual.

Electrical safety

This tool is double insulated; therefore no

earth wire is required. Always check that the

power supply corresponds to the voltage on

the rating plate.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Black and Decker CD714CRES Slagborrmaskin. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Black and Decker. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Black and Decker CD714CRES Slagborrmaskin på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Black and Decker Slagborrmaskiner
Fler bruksanvisningar för Slagborrmaskiner

Vanliga frågor om Black and Decker CD714CRES Slagborrmaskin

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Black and Decker KR400 Slagborrmaskin

Bruksanvisning

Black and Decker KR70LSR Slagborrmaskin

Bruksanvisning

Black and Decker KD355 Slagborrmaskin

Bruksanvisning

Black and Decker KD352CRE Slagborrmaskin

Bruksanvisning

Black and Decker KR50CRE Slagborrmaskin

Bruksanvisning

Black and Decker KR7532K Slagborrmaskin

Bruksanvisning

Black and Decker KD351RE Slagborrmaskin

Bruksanvisning

Black and Decker AST1 Slagborrmaskin

Relaterade kategorier