Bruksanvisning Adler AD 6010 Ugn

Bruksanvisning

4

13. Housing 4. Timer

20. During operation, door glass becomes extremely hot. It must not be heavily hit, or pour

cold water because of the risk of its crack.

22. Due to the high temperature keep special carefulness when removing tray or grate (or

other accessories approved for use in ovens) with baked dishes. Please be careful, when

removing the tray or hot oil or other hot liquids. Use dedicated accessories offered with the

oven or heat-resistant oven gloves.

23. Oversized food must not be inserted, as this may cause fire and damage the appliance.

21. The power cord can be installed over an oven, and should not touch or be near hot

surfaces. Do not place the oven under the electrical outlet.

25. Do not store any other accessories in the appliance.

26. After cooking and before cleaning the machine, unplug the power cord from the outlet

and leave to cool. Wait a long period of time because the heated oven cools very slowly.

31. Do not use metal scouring pads to clean. Broken metal pieces may come into contact

with electrical parts, creating a risk of electric shock.

29. Do not wash metal parts in the dishwasher, as the corrosive detergents used in these

devices cause darkening of the above parts. It is recommended to wash them by hand, using

traditional dishwashing liquids.

1. Temperature adjustment knob 2/3. Heating mode selection knob / power button

27. Clean the device after each use.

19. Do not touch the hot surfaces of the oven (door, top or bottom wall and side

walls). Use protective gloves to remove or touch any hot parts.

24. Do not place any cardboard, paper, plastics and other flammable or easily melt objects in

the oven.

put any items.

28. Do not use corrosive detergents such as emulsions, creams, pastes, etc. to clean the

casing. They can wipe off the graphic signs on the surface such as scales, marks, warning

signs etc.

30. To avoid overheating of the oven the crumb tray or any other part of the oven should not

be cover with a metal foil.

DESCRIPTION:

4. In order to switch the device off before the time has run out, rotate heating mode selection knob (2)(3) knob to "OFF".

1. Set temperature adjustment knob (1) to the desired value.

9. Before removing the food from the oven, allow the appliance to cool down for a while. Then, grip the rotary handle (11) behind the spindle

axis. First, raise the left side and move it to the left so that the right side of the axle exits the drive clutch. Then carefully remove the baked

food from the oven.

3. Set timer (4) to required baking time. A bell is rung upon reaching required baking time.

- Make sure the oven is placed on high-temperature resistant base

5. Always unplug the power cable from the power outlet after use.

2. Set the heating mode selection knob (2)(3) in position:

BEFORE SWITCHING ON

USING THE DEVICE

USING ROTARY SPIT

3. Put in second pair of jaws according to point 1 and 2, and stick them from other side, "closing" the product on the spit axis.

(- upper, - lower, - Both upper and lower) - (3)

4. Check that the fixed product is located centrally along spit axis.

7. Turn on the oven with the selector knob (2) (3), set the timer (4) to the desired cooking time - the indicator light (5c) will light up. Set the

desired cooking time.

8. At the end of the baking time or to switch the oven off early by turning the knob (2) (3) to "OFF". Always remove the plug from the socket

after baking.

7. Baking tray 8. Grill

5 a b c. Indicator lamp 6. Handle for opening glass door

- Make sure the oven is dry

11. Spit removal handle 12. Spit jaws (2 pairs)

- Make sure there Is enough ventilation space around oven (minimum 10 cm on each side and 30 cm above the oven)

9. Rotary spit axis 10. Tray removal handle

(- rotary spit, - fan, - both rotary spit and fan)- (2)

1. Put one pair of jaws on the axis sharp side, then slide onto the axis.

5. Place the square end of the spit in the spit drive coupling on the right-hand side of oven heating chamber, and place sharp end in the

bearing on left-hand side.

6. Set temperature adjustment knob (1) to the desired value (for example 200°C)

2. Impale such prepared spit (9) into the center part of the product to be baked, stick the spit jaws (12) in the product.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Adler AD 6010 Ugn. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Adler. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Adler AD 6010 Ugn på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Adler Ugnar
Fler bruksanvisningar för Ugnar

Vanliga frågor om Adler AD 6010 Ugn

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Adler AD 6029 Ugn

Bruksanvisning

Adler AD 6309 Ugn

Bruksanvisning

Adler AD 6031 Ugn

Bruksanvisning

Adler AD 6025 Ugn

Bruksanvisning

Adler AD 6030 Ugn

Bruksanvisning

Adler AD 6001 Ugn

Bruksanvisning

Adler AD 6028 Ugn

Bruksanvisning

Adler AD 6024 Ugn

Relaterade kategorier