Bruksanvisning Worx WX696L.9KIT Multiverktyg

Bruksanvisning

20V Cordless Oscillating Tool EN

3

h) Do not let familiarity gained from

frequent use of tools allow you to become

complacent and ignore tool safety

principles. A careless action can cause severe

injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or remove the battery pack,

if detachable, from the power tool before

making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools and accessories.

Check for misalignment or binding of

moving parts, breakage of parts and any

other condition that may affect the power

tool’s operation. If damaged, have the

power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

h) Keep handles and grasping surfaces

dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not

allow for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specified

by the manufacturer. A charger that is

suitable for one type of battery pack may create

a risk of fire when used with another battery

pack.

b) Use power tools only with specifically

designated battery packs. Use of any other

battery packs may create a risk of injury and

fire.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

e) Do not use a battery pack or tool that is

damaged or modified. Damaged or modified

batteries may exhibit unpredictable behavior

resulting in fire, explosion or risk of injury.

f) Do not expose a battery pack or tool to

fire or excessive temperature. Exposure

to fire or temperature above (266 ° F) (130 °C )

may cause explosion.

g) Follow all charging instructions and

do not charge the battery pack or tool

outside the temperature range specified

in the instructions. Charging improperly or

at temperatures outside the specified range

may damage the battery and increase the risk

of fire.

6) Service

a) Have your power tool serviced by

a qualified repair person using only

identical replacement parts. This will

ensure that the safety of the power tool is

maintained.

b) Never service damaged battery packs.

Service of battery packs should only be

performed by the manufacturer or authorized

service providers.

SAFETY INSTRUCTION FOR

CUTTING

1. Hold the power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring . Cutting accessory contacting

a “live” wire may make exposed metal parts

of the power tool “live” and could give the

operator an electric shock.

2. Use clamps or another practical way to

secure and support the workpiece to a

stable platform. Holding the work by hand or

against your body leaves it unstable and may

lead to loss of control.

SAFETY WARNINGS FOR

BATTERY PACK

a) Do not dismantle, open or shred battery

pack.

b) Do not expose battery pack to heat or

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Worx WX696L.9KIT Multiverktyg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Worx. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Worx WX696L.9KIT Multiverktyg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Worx Multiverktyg
Fler bruksanvisningar för Multiverktyg

Vanliga frågor om Worx WX696L.9KIT Multiverktyg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Worx WX680 Multiverktyg

Bruksanvisning

Worx WX671.1 Sonicrafter Multiverktyg

Bruksanvisning

Worx WX675 Multiverktyg

Bruksanvisning

Worx WX671.8 Sonicrafter Multiverktyg

Bruksanvisning

Worx WX671.4 Sonicrafter Multiverktyg

Bruksanvisning

Worx WX696L.KIT Multiverktyg

Bruksanvisning

Worx WX675.1 Multiverktyg

Bruksanvisning

Worx WX673.1 Sonicrafter Multiverktyg

Relaterade kategorier