Bruksanvisning Worx WG325.9 Kedjesåg

Bruksanvisning

Cordless Pruning Saw EN

5

contact hidden wiring.

Saw chains contacting a

”live” wire may make exposed metal parts of the

pruning saw ”live” and could give the operator

an electric shock.

c) Wear safety glasses protection. Further

protective equipment for hearing, head, hands,

legs and feet is recommended.

Adequate





chain.

d) Do not operate a pruning saw, on a ladder, from

a rooftop, or any unstable support.

Operation

of a pruning saw in this manner could result in



e) Always keep proper footing and operate the



secure and level surface.

Slippery or unstable

surfaces may cause a loss of balance or control

of the pruning saw.

f) When cutting a limb that is under tension ,

be alert for spring back.

When the tension in





pruning saw out of control.

g) Use extreme caution when cutting brush and

saplings.

The slender material may catch the

saw chain and be whipped toward you or pull

you off balance.

h) Carry the pruning saw by the front handle with

the pruning saw switched off and away from

your body. When transporting or storing the



Proper handling of the pruning saw will reduce

the likelihood of accidental contact with the

moving saw chain.

i) Follow instructions for lubricating, chain

tensioning and changing the bar and chain.

Improperly tensioned or lubricated chain

may either break or increase the chance for

kickback.

j) Cut wood only. Do not use pruning saw for

purposes not intended. For example: do not

use pruning saw for cutting metal, plastic,

masonry or non-wood building materials.

Use

of the pruning saw for operations different than

intended could result in a hazardous situation.

k) This pruning saw is not intended for tree

felling.

Use of the pruning saw for operations

different than intended could result in serious



l) Do not operate a pruning saw in a tree unless



Operation of a pruning saw in a tree without

proper training could increase the risk of

serious personal injury.

m) Follow all instructions when clearing jammed

material, storing or servicing the pruning saw.

Make sure the switch is off and the battery

pack is removed.

Unexpected actuation of the





 

should, as a minimum, practise cutting logs on

a saw-horse or cradle.

0) Recommendation to have sharpening and

maintenance of the saw chain performed by

authorised service centres.

2) Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the



closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and back

towards the operator.

Pinching the saw chain along the top of the guide

bar may push the guide bar rapidly back towards

the operator.

Either of these reactions may cause you to lose

control of the saw which could result in serious



safety devices built into your saw. As a pruning saw

user, you should take several steps to keep your





or incorrect operating procedures or conditions

and can be avoided by taking proper precautions as

given below:

 

encircling the pruning saw handles, and

position your body and arm to allow you to

resist kickback forces.

Kickback forces can be

controlled by the operator, if proper precautions

are taken. Do not let go of the pruning saw.

b) Do not overreach and do not cut above

shoulder height.

This helps prevent unintended

tip contact and enables better control of the

pruning saw in unexpected situations.

c) Only use replacement bars and chains



Incorrect

replacement guide bars and saw chains may



d) Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to

increased kickback.

FOR PRUNING SAW WITH

THE EXTENDED POLE

SAFETY WARNINGS

Important Safety Instructions

WARNING: Read all safety warnings and

instructions. Failure to follow the

warnings and instructions may result in



Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Worx WG325.9 Kedjesåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Worx. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Worx WG325.9 Kedjesåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Worx Kedjesågar
Fler bruksanvisningar för Kedjesågar

Vanliga frågor om Worx WG325.9 Kedjesåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Worx WG309 Kedjesåg

Bruksanvisning

Worx WG385.1 Kedjesåg

Bruksanvisning

Worx WG305.1 Kedjesåg

Bruksanvisning

Worx WG324E.2 Kedjesåg

Bruksanvisning

Worx WG385E.9 Kedjesåg

Bruksanvisning

Worx WG304 Kedjesåg

Bruksanvisning

Worx WG322E Kedjesåg

Bruksanvisning

Worx WG305 Kedjesåg

Relaterade kategorier