Bruksanvisning Wilderness Equipment Avenue Ryggsäck

Bruksanvisning

BACKPACK BASICS

Whatever the load you are carrying, comfort and energy conservation depend

on how you load your pack bag – what you put where - and then, each time

you put on your pack, making simple harness adjustments in the correct

sequence. Out there, we see far too many people with badly loaded and poorly

adjusted packs. Everything we do in pack design is directed towards your

backpacking enjoyment. You can  nish o the job by taking care to follow

these basic instructions.

Most of the weight in a heavy pack is best carried at hip level, on the pelvic

structure and the associated posterior muscles. To achieve this, packs over

about 50 litres capacity invariably have a sti internal frame and a full hip

harness, the two features that distinguish a ‘backpack’ from a ‘day pack’. You

should think of the frame as propping the pack bag up o the hip harness,

concentrating the weight at hip level. If the pack bag can sag load will fall back

onto your shoulders. With loads above 15 kilograms the hip harness design also

becomes more and more important but,  nally, it also all depends on the  tting

and adjustment of your pack.

Successful adjustment is only possible if the back length of the pack you have

purchased matches your torso length. This is the distance from your hip bones

up to your shoulder level. It is normally your retailer’s job to ensure your new

pack is the right back length but, as a quick check, put on your pack and fasten

the hip harness at the correct level, explained below. Looking from the side the

general ‘factory-set’ curves of the pack’s ‘body’ or ‘harness’ panel should line up

well with those of your back pro le. Often there is no need to change the frame

curvature. A big gap in the middle of your back probably indicates the pack is

too short for you. For more detail go to Checking Your Pack’s Back Length at the

end of this Backpack Basics section. Also, if you have a WE pack with our unique

dual-back-length system make sure this is set for your torso length, another job

for your retailer when  tting your pack.

Now, before attempting any adjustments, you must load your pack so it

simulates a real trip load, settling the pack down on your body. Place about

10kg in the pack bag but don’t just chuck everything in so it hangs like a sack

of potatoes. Read the Loading Your Pack section several pages on. Make use of

the pack compression straps to hold the load in place close to your body.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Wilderness Equipment Avenue Ryggsäck. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Wilderness Equipment. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Wilderness Equipment Avenue Ryggsäck på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Wilderness Equipment Ryggsäckar
Fler bruksanvisningar för Ryggsäckar

Vanliga frågor om Wilderness Equipment Avenue Ryggsäck

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Wilderness Equipment Razor 50 Ryggsäck

Bruksanvisning

Wilderness Equipment Slipstream Plus Ryggsäck

Bruksanvisning

Wilderness Equipment Slipstream Ryggsäck

Bruksanvisning

Wilderness Equipment Expedition Ryggsäck

Bruksanvisning

Wilderness Equipment Slingshot Ryggsäck

Bruksanvisning

Wilderness Equipment Mountain Expedition Ryggsäck

Bruksanvisning

Wilderness Equipment Contour Ryggsäck

Bruksanvisning

Wilderness Equipment Pindar 60 Ryggsäck

Relaterade kategorier