Bruksanvisning Wagner F300 Furno Varmluftpistol

Bruksanvisning

FURNO 300

3

EN

To reduce the risks of re or explosion, electrical shock and the

injury to persons, read and understand all instructions included in

this manual. Be familiar with the controls and proper usage of the

equipment.

Indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

HAZARD: POISON

Extreme care should be taken when stripping paint. The peelings,

residue and vapours of paint may contain lead, which is poisonous.

Any paint applied to homes before 1950 is likely to contain lead.

Any paint manufactured before 1977 may contain lead. Once the

paint is deposited on surfaces, hand-to-mouth contact can result in

the ingestion of lead. Exposure to even low levels of lead can cause

irreversible brain and nervous system damage. Young and unborn

children are particularly vulnerable to lead poisoning.

Before beginning any paint removal process you should determine

whether the paint you are removing contains lead. This can be done

by your local health department or by a professional who uses a paint

analyzer to check the lead content of the paint to be removed. Lead-

based paint should only be removed by a professional and should not

be removed using a Heat Gun.

PREVENTION:

Move the work piece outdoors, sheltered from rain. If this is not

possible, keep the work area well-ventilated. Open the windows and

put an exhaust fan in one of them. Be sure the fan is moving the air from

inside to outside.

• Remove or cover any carpets, rugs, furniture, clothing, cooking

utensils and air ducts.

• Place drop cloths in the work area to catch any paint chips or

peelings. Wear protective clothing such as extra work shirts, overalls

and hats.

• Work in one room at a time. Furnishings should be removed or

placed in the centre of the room and covered. Work areas should

be sealed o from the rest of the dwelling by sealing doorways with

drop cloths.

• Wear an approved dust respirator mask or a dual lter respirator

mask for dust and fumes. These masks and replaceable lters are

readily available at major hardware stores. Be sure that the mask

ts properly. Beards and facial hair may keep masks from sealing

properly. Change the lters often. Disposable paper masks are not

adequate.

• Use caution when operating the Heat Gun. Keep the Heat Gun

moving as excessive heat will generate fumes which can be inhaled

by the operator.

• Keep food and drink out of the work area. Wash hands, arms and face

and rinse mouth before eating or drinking. Do not smoke or chew

gum or tobacco in the work area.

• Clean up all removed paint and dust by wet mopping the oors.

Use a wet cloth to clean all walls, sills and any other surface where

paint dust is clinging. Do not sweep, dry dust or vacuum. Use a high

phosphate detergent of trisodium phosphate (TSP) to wash and mop

areas.

• At the end of each work session, put the paint chips and debris in

a double plastic bag, close it with tape or twist ties and dispose of

properly.

• Remove protective clothing and work shoes in the work area to

avoid carrying dust into the rest of the building. Wash work clothes

separately. Wipe shoes o with a wet rag and then wash it with the

work clothes. Wash hair and body thoroughly with soap and water.

Important Safety Information • Read all safety information before operating the equipment.

Save these instructions

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Wagner F300 Furno Varmluftpistol. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Wagner. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Wagner F300 Furno Varmluftpistol på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Wagner Varmluftpistoler
Fler bruksanvisningar för Varmluftpistoler

Vanliga frågor om Wagner F300 Furno Varmluftpistol

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Wagner F750 Furno Varmluftpistol

Bruksanvisning

Wagner F700 Furno Varmluftpistol

Bruksanvisning

Wagner F500 Furno Varmluftpistol

Bruksanvisning

Bavaria BHA 1500 Varmluftpistol

Bruksanvisning

Black and Decker KX1692 Varmluftpistol

Bruksanvisning

DeWalt D26411 Varmluftpistol

Bruksanvisning

Parkside IAN 71600 Varmluftpistol

Bruksanvisning

Metabo HE 23-650 Control Varmluftpistol

Relaterade kategorier