Bruksanvisning Timex TW2W99000 Marlin Armbandsur

Bruksanvisning

3

ENGLISH

TO SET DAILY ALARM

1. PRESS pusher “A” to bring up DAILY ALARM display: “ALARM” will appear

for 3 seconds followed by the current alarm setting time and time zone. The

ALARM mode symbol “AL” and the applicable time zone symbol “T1” or “T2”

alternate to give complete information.

2. PRESS pusher “D” to let time zone flash.

3. PRESS pusher “C” to select time zone.

4. PRESS pusher “A” to let hour flash.

5. PRESS pusher “C” to advance hour.

6. PRESS pusher “A” and “C” as above to adjust tens of minutes and minute.

7. PRESS pusher “D” to complete setting.

8. Alarm is automatically activated after setting

S is displayed.

NOTE:

• When the alarm sounds, it will beep for 20 seconds.

• To stop the alarm beep, PRESS any pusher.

• PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate

fast advance.

TO SET DAILY ALARM OR CHIME ON/OFF

1. PRESS pusher “A” to bring up DAILY ALARM display.

2. PRESS pusher “C” to activate or deactivate daily alarm and chime

accordingly.

NOTE:

• a or C will appear or disappear according to daily alarm activation or

deactivation.

•

N orBwill appear or disappear according to chime activation or deactivation.

• The alarm coordinates with the digital time not analog time.

• The alarm will sound only if the digital time zone (T1 or T2) selected in the

Alarm set mode is currently displayed, as confirmed by the alarm symbol a

or C.

TO USE COUNTDOWN TIMER

SETTING MODE

HOUR MINUTE

1. PRESS pusher “A” to bring up COUNTDOWN TIMER display. “24 HR TR”

will appear.

2. PRESS pusher “D” to let hour flash.

3. PRESS pusher “C” to advance hour.

4. PRESS pusher “A” to set tens of minutes.

5. PRESS pusher “C” to advance tens of minutes.

6. PRESS pusher “A” and “C” as above to adjust minute.

7. PRESS pusher “D” to complete setting.

8. PRESS pusher “C” to start the timer.

9. PRESS pusher “D” to stop the timer.

10. PRESS pusher “D” again to resume timer to the preset time.

NOTE: When the timer counts down to zero it will beep for 20 seconds.

To stop the timer beep, PRESS any pusher.

“T” will appear to designate that the countdown timer is running.

Countdown time up to 24 hours.

PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast

advance.

TO USE CHRONOGRAPH FOR STANDARD MEASUREMENT:

OR

1. PRESS pusher “A” to bring up CHRONOGRAPH display; “CH LAP” or “CH

SPL” will appear.

2. PRESS pusher “C” to start timing.

3. PRESS pusher “D” to stop timing.

4. PRESS pusher “D” to reset.

TO USE CHRONOGRAPH FOR LAP OR SPLIT TIME MEASUREMENT:

1. PRESS pusher “A” to bring up CHRONOGRAPH display; “CH LAP” or

“CH SPL” will appear.

2. PRESS pusher “D” to select LAP or SPLIT.

3. PRESS pusher “C” to start timing.

4. PRESS pusher “C” to record the first Lap or Split time; digits will be frozen for

15 seconds; “L” or “S” will flash to indicate that the next Lap or Split time is

being recorded in the background.

5. PRESS pusher “A” to view the running display while the display is frozen.

6. PRESS pusher “C” to take another Lap or Split.

7. PRESS pusher “D” to stop.

8. PRESS pusher “D” again to reset.

NOTE: CHRONOGRAPH must be reset to zero to switch between LAP and

SPLIT.

Records time up to 24 hours and shows 1/100 of seconds for the first hour.

TO SET DUAL TIME:

HOUR MINUTE

1. PRESS pusher “A” to bring up DUAL TIME display. “T2” will appear beside

the dual time.

2. PRESS and HOLD pusher “D”; “Hold” will display until hour flashes.

3. PRESS pusher “C” to advance hour.

4. PRESS pusher “A” to let month flash.

5. PRESS pusher “C” to advance month.

6. PRESS pusher “A” and “C” as above to adjust date, day, and to set

12 / 24 hour format.

7. PRESS pusher “D” to complete setting.

NOTE: PRESS and hold pusher “C” for 2 seconds in setting mode to activate

fast advance.

NOTE:

1. While in setting of any mode, if no pusher is pressed for 90 seconds the

display will automatically return to TIME / CALENDAR mode.

2. While in any mode other than TIME / CALENDAR mode, whenever pusher

“C” or “D” is pressed, the next press of pusher “A” will automatically return

the display to TIME / CALENDAR mode.

MULTI-FUNCTION MODELS

CB

A

CROWN POSITION

NORMAL POSITION

Your watch has a normal large face display and three small faces displaying

date, day and 24-hour time.

TO SET THE DAY

1. Pull crown all the way out and turn CLOCKWISE until correct day appears.

2. Push crown in to restart.

NOTE: You must set day before setting time.

TO SET THE TIME

1. Pull crown all the way out and turn to correct time.

2. Push crown in to restart.

NOTE: 24-hour display will set automatically.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Timex TW2W99000 Marlin Armbandsur. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Timex. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Timex TW2W99000 Marlin Armbandsur på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Timex Armbandsur
Fler bruksanvisningar för Armbandsur

Vanliga frågor om Timex TW2W99000 Marlin Armbandsur

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Timex TW2U37800VQ Waterbury Armbandsur

Bruksanvisning

Timex TW2V72300 Marlin Armbandsur

Bruksanvisning

Timex TW2Y37600 Marlin Armbandsur

Bruksanvisning

Timex TW2V42800 Q Armbandsur

Bruksanvisning

Timex TW2Y68500 Q Armbandsur

Bruksanvisning

Timex TW2V18600 Q Armbandsur

Bruksanvisning

Timex TW2U71500ZA Easy Reader Armbandsur

Bruksanvisning

Timex TW2W87200 Marlin Armbandsur

Relaterade kategorier