Bruksanvisning TEAC AD-500 CD-spelare

Bruksanvisning

_

4

_

Before Use

O Choose the installation location of your

unit carefully. Avoid placing it in direct

sunlight or close to a source of heat.

Also avoid locations subject to

vibrations and excessive dust, heat,

cold or moisture. Keep away from such

sources that hum, such as transformers

or motors.

O Do not open the cabinet as this might

result in damage to the circuitry or

electrical shock. If a foreign object

should get into the set, contact your

dealer.

O When removing the power plug from

the wall outlet, always pull directly on

the plug, never yank the cord.

O Be sure not to handle discs with dirty

fingers. Never insert a disc which has a

crack on the surface.

O Do not attempt to clean the unit with

chemical solvents as this might damage

the finish. Use a clean, dry cloth.

O Keep this manual in a safe place for

future reference.

This unit has been designed specifically for

reproduction of compact discs bearing the

"˛" mark. No other discs can be

reproduced.

O Always place the compact disc in the

disc tray with the label facing upward.

(Compact discs can be played only on

one side.)

O To remove a disc from its storage case,

press down on the center of the case

and lift the disc out, holding it carefully

by the edges.

How to remove the disc

How to hold the disc

O Fingerprints and dust should be

carefully wiped off the disc's recorded

surface with a soft cloth.

Wipe radially

O Do not use thinner, benzine or alcohol

as they damage the surface of the

disc's plastic surface.

O Discs should be returned to their cases

after use to avoid serious scratches

that could cause the laser pickup to

"skip."

O Do not expose discs to direct sunlight or

high humidity and temperature for

extended periods.

Long exposure to high temperatures

can warp the disc.

O Do not stick paper or write anything

with a ballpoint pen on the surface of

the label side.

Read This Before Operating

Handling the Tapes

Cassette Tape

Handling the Discs

Remote control unit

Do not store tapes in the following places:

‚ On top of heaters, exposed to direct

sunlight or in any other places with high

temperatures.

O Near speakers, on TV sets or amplifiers

or where they would be exposed to

strong magnetic fields.

O Where humidity is high and in dirty,

dusty places.

O Avoid dropping or subjecting cassettes

to excessive shocks.

O As C-120 tapes are physically weak and

could become entangled in the

transport mechanism, do not use them.

Tape Selection:

For the automatic tape select function to

work properly, metal and chrome (cobalt)

tapes must have identification holes.

*Dolby noise reduction manufactered under

license from Dolby Laboratories Licensing

Corporation.

“DOLBY” and the double-D symbol

∂

are trademarks of Dolby Laboratories

Licensing Corporation.

When operating the remote control unit,

point it towards the remote sensor on the

front panel of the unit.

ª Battery Installation

1. Remove the battery compartment

cover.

2. Insert two “AA” (R6, SUM-3) dry

batteries.

Make sure that the batteries are

inserted with their positive

≠ and

negative

– poles positioned correctly.

3. Close the cover until it clicks.

Battery Replacement.

If you notice that the distance between

the remote control unit and the unit for

correct operation becomes shorter, it

indicates that the batteries are exhaust-

ed. In this case replace the batteries with

new ones.

Precautions concerning batteries

O Be sure to insert the batteries with

correct positive

≠ and negative –

polarities.

O Use batteries of the same type. Never

use different types of batteries

together.

O Rechargeable and non-rechargeable

batteries can be used. Refer to the

precautions on their labels.

O When the remote control unit is not to

be used for a long time (more than a

month), remove the batteries from the

remote control unit to prevent them

from leaking. If they leak, wipe away

the liquid inside the battery

compartment and replace the batteries

with new ones.

O Do not heat or disassemble batteries

and never dispose of old batteries by

throwing them in fire.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din TEAC AD-500 CD-spelare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar TEAC. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din TEAC AD-500 CD-spelare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för TEAC CD-spelare
Fler bruksanvisningar för CD-spelare

Vanliga frågor om TEAC AD-500 CD-spelare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

TEAC AD-800-B CD-spelare

Bruksanvisning

TEAC CD-1000 CD-spelare

Bruksanvisning

TEAC CD-2000 CD-spelare

Bruksanvisning

TEAC PD-H600 CD-spelare

Bruksanvisning

TEAC CR-H500NT CD-spelare

Bruksanvisning

TEAC CR-H238i CD-spelare

Bruksanvisning

TEAC CD-3000 CD-spelare

Bruksanvisning

TEAC CD-RW890 CD-spelare

Relaterade kategorier