Bruksanvisning Tanaka TCS 40EA Kedjesåg

Bruksanvisning

2

English

WARNING

The engine exhaust from this product contains

chemical known to the State of California to cause

cancer, birth defects or other reproductive harm.

SAFETY PRECAUTIONS FOR CHAIN

SAW USERS

Kickback safety precautions

WARNINGS! : Kickback may occur when the nose

or tip of the guide bar touches an object, or when

the wood closes in and pinches the saw chain in

the cut. Tip contact in some cases may cause a

lightning-fast reverse reaction, kicking the guide bar

up and back toward the operator. Pinching the saw

chain along the top of the guide bar may push the

guide bar rapidly back toward the operator. Either of

these reactions may cause you to lose control of the

saw, which could result in serious personal injury.

Do not rely exclusively upon the safety devices built

into your saw. As a chain saw user, you should take

several steps to keep your cutting jobs free from

accident or injury. ( Fig.1)

1

Fig. 1

○

With a basic understanding of kickback, you

can reduce or eliminate the element of surprise.

Sudden surprise contributes to accidents.

○

Keep a good fi rm grip on the saw with both

hands, the right hand on the rear handle and the

left hand on the front handle, when the engine is

running. Use a fi rm grip with thumbs and fi ngers

encircling the chain saw handles. A fi rm grip will

help you reduce kickback and maintain control of

the saw. Don't let go.

○

Make sure that the area in which you are cutting

is free from obstructions. Do not let the nose

of the guide bar contact a log, branch, or any

other obstruction that could be hit while you are

operating the saw.

○

Cut at high engine speeds.

○

Do not overreach or cut above shoulder height.

○

Follow the manufacturer's sharpening and

maintenance instructions for the saw chain.

○

Only use replacement bars and chains specifi ed

by the manufacturer or the equivalent.

Other safety precautions

○

Do not operate a chain saw with one hand!

Serious injury to the operator, helpers,

bystanders, or any combination of these persons

may result from one-handed operation. A chain

saw is intended for two-handed use.

○

Do not operate a chain saw when you are fatigued.

○

Use safety footwear, snug-fi tting clothing,

protective gloves, and eye, hearing, and head

protection devices.

○

Use caution when handling fuel. Move the chain

saw at least 10 feet (3 m) from the fueling point

before starting the engine.

○

Do not allow other persons to be near the chain

saw when starting or cutting with the chain saw.

Keep bystanders and animals out of the work area.

○

Do not start cutting until you have a clear work

area, secure footing, and a planned retreat path

from the falling tree.

○

Keep all parts of your body away from the saw

chain when the engine is running.

○

Before you start the engine, make sure that the

saw chain is not contacting anything.

○

Carry the chain saw with the engine stopped,

the guide bar and saw chain to the rear, and the

muffl er away from your body.

○

Do not operate a chain saw that is damaged,

improperly adjusted, or not completely and

securely assembled. Be sure that the saw chain

stops moving when the throttle control trigger is

released.

○

Shut off the engine before setting the chain saw

down.

○

Use extreme caution when cutting small-size

brush and saplings because slender material

may catch the saw chain and be whipped toward

you or pull you off balance.

○

When cutting a limb that is under tension, be

alert for springback so that you will not be struck

when the tension in the wood fi bers is released.

○

Keep the handles dry, clean, and free of oil or

fuel mixture.

○

Operate the chain saw only in well-ventilated

areas.

○

Do not operate a chain saw in a tree unless you

have been specifi cally trained to do so.

○

All chain saw service, other than the items

listed in the instruction manual(s) maintenance

instructions, should be performed by competent

chain saw service personnel. (For example, if

improper tools are used to remove the fl ywheel or

if an improper tool is used to hold the fl ywheel in

order to remove the clutch, structural damage to

the fl ywheel could occur and subsequently could

cause the fl ywheel to burst.).

○

When transporting your chain saw, use the

appropriate guide-bar scabbard.

000Book̲TCS40EA̲US.indb2000Book̲TCS40EA̲US.indb2 2018/09/0415:04:472018/09/0415:04:47

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Tanaka TCS 40EA Kedjesåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Tanaka. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Tanaka TCS 40EA Kedjesåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Tanaka Kedjesågar
Fler bruksanvisningar för Kedjesågar

Vanliga frågor om Tanaka TCS 40EA Kedjesåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Tanaka TCS 2801S Kedjesåg

Bruksanvisning

Tanaka TCS 33EDTP Kedjesåg

Bruksanvisning

Tanaka ECS-3500 Kedjesåg

Bruksanvisning

Tanaka TCS 3401S Kedjesåg

Bruksanvisning

Tanaka ECV-3800 Kedjesåg

Bruksanvisning

Tanaka TCS 2800S Kedjesåg

Bruksanvisning

Tanaka TCS 33ED Kedjesåg

Bruksanvisning

Tanaka ECV-3801 Kedjesåg

Relaterade kategorier