Bruksanvisning Tanaka TCS 33EB Kedjesåg

Bruksanvisning

2

English

WARNING

The engine exhaust from this product contains chemical

known to the State of California to cause cancer, birth

defects or other reproductive harm.

SAFETY PRECAUTIONS FOR

CHAIN SAW USERS

Kickback safety precautions

WARNINGS! : Kickback may occur when the nose

or tip of the guide bar touches an object, or when the

wood closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a lightning-fast

reverse reaction, kicking the guide bar up and back

toward the operator. Pinching the saw chain along the

top of the guide bar may push the guide bar rapidly

back toward the operator. Either of these reactions may

cause you to lose control of the saw, which could result

in serious personal injury. Do not rely exclusively upon

the safety devices built into your saw. As a chain saw

user, you should take several steps to keep your cutting

jobs free from accident or injury. ( Fig.1)

1

Fig. 1

○

With a basic understanding of kickback, you can

reduce or eliminate the element of surprise. Sudden

surprise contributes to accidents.

○

Keep a good fi rm grip on the saw with both hands,

the right hand on the rear handle and the left hand

on the front handle, when the engine is running. Use

a fi rm grip with thumbs and fi ngers encircling the

chain saw handles. A fi rm grip will help you reduce

kickback and maintain control of the saw. Don't let

go.

○

Make sure that the area in which you are cutting

is free from obstructions. Do not let the nose of

the guide bar contact a log, branch, or any other

obstruction that could be hit while you are operating

the saw.

○

Cut at high engine speeds.

○

Do not overreach or cut above shoulder height.

○

Follow the manufacturer's sharpening and

maintenance instructions for the saw chain.

○

Only use replacement bars and chains specifi ed by

the manufacturer or the equivalent.

Other safety precautions

○

Do not operate a chain saw with one hand! Serious

injury to the operator, helpers, bystanders, or any

combination of these persons may result from

one-handed operation. A chain saw is intended for

two-handed use.

○

Do not operate a chain saw when you are fatigued.

○

Use safety footwear, snug-fi tting clothing, protective

gloves, and eye, hearing, and head protection

devices.

○

Use caution when handling fuel. Move the chain saw

at least 10 feet (3 m) from the fueling point before

starting the engine.

○

Do not allow other persons to be near the chain saw

when starting or cutting with the chain saw. Keep

bystanders and animals out of the work area.

○

Do not start cutting until you have a clear work area,

secure footing, and a planned retreat path from the

falling tree.

○

Keep all parts of your body away from the saw chain

when the engine is running.

○

Before you start the engine, make sure that the saw

chain is not contacting anything.

○

Carry the chain saw with the engine stopped, the

guide bar and saw chain to the rear, and the muffl er

away from your body.

○

Do not operate a chain saw that is damaged,

improperly adjusted, or not completely and securely

assembled. Be sure that the saw chain stops moving

when the throttle control trigger is released.

○

Shut off the engine before setting the chain saw

down.

○

Use extreme caution when cutting small-size brush

and saplings because slender material may catch

the saw chain and be whipped toward you or pull

you off balance.

○

When cutting a limb that is under tension, be alert

for springback so that you will not be struck when

the tension in the wood fi bers is released.

○

Keep the handles dry, clean, and free of oil or fuel

mixture.

○

Operate the chain saw only in well-ventilated areas.

○

Do not operate a chain saw in a tree unless you have

been specifi cally trained to do so.

○

All chain saw service, other than the items

listed in the instruction manual(s) maintenance

instructions, should be performed by competent

chain saw service personnel.

(For example, if

improper tools are used to remove the fl ywheel or

if an improper tool is used to hold the fl ywheel in

order to remove the clutch, structural damage to the

fl ywheel could occur and subsequently could cause

the fl ywheel to burst.).

○

When transporting your chain saw, use the

appropriate guide-bar scabbard.

000Book̲TCS33EB̲US.indb2000Book̲TCS33EB̲US.indb2 2018/09/0414:54:452018/09/0414:54:45

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Tanaka TCS 33EB Kedjesåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Tanaka. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Tanaka TCS 33EB Kedjesåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Tanaka Kedjesågar
Fler bruksanvisningar för Kedjesågar

Vanliga frågor om Tanaka TCS 33EB Kedjesåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Tanaka ECV-3801 Kedjesåg

Bruksanvisning

Tanaka TCS 2801S Kedjesåg

Bruksanvisning

Tanaka TCS 40EA Kedjesåg

Bruksanvisning

Tanaka ECS-3301D Kedjesåg

Bruksanvisning

Tanaka ECS-3300 Kedjesåg

Bruksanvisning

Tanaka TCS 51EA Kedjesåg

Bruksanvisning

Tanaka TCS 33EDP Kedjesåg

Bruksanvisning

Tanaka ECS-3500 Kedjesåg

Relaterade kategorier