Bruksanvisning Stokke Tripp Trapp Barnmatstol

Bruksanvisning

2 UK/IE

On the last pages of this user guide you will find pictures that describe the assem-

bly of your Tripp Trapp® high chair and Tripp Trapp® Baby Set™. The Tripp Trapp®

Baby Set™ should only be used with the seat plate in the first groove from the top

of the chair. To further increase the backward stability of the Tripp Trapp® chair, a

replaceable, extended rear glider (”Extended Glider” has been developed for the

Tripp Trapp® chair. We recommend that you always use the Tripp Trapp® Extended

Glider while the chair is being used with a harness or the Tripp Trapp® Baby Set™.

The Extended glider is included in the Tripp Trapp® Baby Set™.

Seat and footrest placement

It is important to adjust the depth and height of the seat and footrest to fit the

size of your child. See illustrations at page 62. The position of the seat and footrest

should be checked as the child grows - at least once a year! The seat plate and

the footrest must be supported by the full length of the grooves on the sides (not

half way supported).

Seat placement

Height - The seat is at the correct height when your child’s elbows are level with

the table top.

Depth - For correct depth of the seat, position the child’s back against the back-

rest with the seat supporting ¾ of the thighs. For the child’s best comfort it is

important that the seat depth is not too deep. Leave comfortable space between

the front edge of the seat and back of the child’s knee. It is surprising how small a

seat a 6-8 month-old baby needs! The seat plate should not protrude more than

4-5 cm in front of the side legs.

Footrest placement

Height – The footrest is at the correct height when the sole of the child’s foot can

rest flat on the footrest, while the thighs are touching the seat.

Depth – Make sure the forward edge of the footrest NEVER protudes beyond the

front tip of the chair legs at floor level.

Cleaning and maintenance

Wipe with a clean damp cloth, wipe off excess of water with a dry cloth. Moisture

will leave cracks in stain. We do not recommend the use of any detergent or micro

fibre cloth. Colours may change if the high chair is exposed to sunlight.

Product information

The chair is made of cultivated beech. The varnish contains no harmful sub-

stances, and the liberation of formaldehyde from the varnish complies with E1

requirements.

Safety approval

Tripp Trapp® high chair assembled with Tripp Trapp® Baby Set™ complies with

EN 14988:2012

IMPORTANT! KEEP FOR FUTURE REFERENCE

READ CAREFULLY BEFORE ASSEMBLING YOUR TRIPP TRAPP® HIGH CHAIR.

Rugs and tiles

To prevent the Tripp Trapp® high chair from tilting backwards, it has plastic

gliders underneath the legs. Their function is to make the high chair slide

backwards and return to an upright position when lifted from the floor in front.

To make sure that the gliders function as intended, the high chair should be

placed on a surface that doesn’t inhibit it from sliding backwards. That means

that the surface should be level, stable and with a certain hardness.

Carpets and rugs that are soft or with long loose ends that the high chair could

sink into, is an unsuitable surface for your Tripp Trapp® high chair. Uneven floors,

like some tiled floors could be are also an unsuitable surface for your Tripp

Trapp® high chair.

The gliders as well as the floor must be kept clean.

Table

Be aware of the risk that

a big frame under the

table top makes it easier for

children to push their legs

against the table and tilt

backwards. Also note that

Tripp Trapp® is designed for

dining tables 72-76 cm high.

Footrest

Make sure the forward

edge of the footrest NEVER

protrudes beyond the front

tip of the chair legs at floor

level. This may cause the

chair to be unstable when

a child climbs in and out of

the Tripp Trapp® high chair.

XDo not leave the child unattended.

XStay in reach of your child.

XIf you use any harness with the high chair make sure it is correctly fitted.

XDo not use the high chair unless all components are correctly fitted and

adjusted. Pay special attention to the seat and footplate - make sure these are

properly fastened before you put your child into the high chair.

XDo not place the high chair near an open fire or other sources of strong heat,

such as electric bar fires, gas fires etc due to the risk of fire.

XDo not use the high chair if any part is broken, torn or missing.

XDo not use the high chair before the child can sit up unassisted.

XAlways place the high chair on a level stable surface and make sure that the high

chair has space to slide backwards.

XAlways use the crotch strap in combination with the rail and the high backrest.

XBe careful not to place small items, toxic substances, hot objects, electrical

flexes etc near the high chair where your child can reach them, as they may

cause choking, poisoning or other injuries.

XRemember to retighten all screws 2-3 weeks after assembly of the high chair.

After that you should check on and retighten the screws if necessary on a

regular basis, e.g. every second month. Keep the Allen key for future use.

XDo not use any accessories or replacement parts not manufactured by STOKKE;

this may affect your child’s safety.

XDo not use the high chair as a stepstool.

XLoosen the screws before installing and removing the rail. This way you will not

damage the lacquer and woodwork. If the Tripp Trapp® high chair is adjusted

correctly, you can easily take your child in and out without removing the rail at all.

XWhen the footrest is positioned close to the metal rod,

there will be a small gap between the inside of the chair

legs and the metal rod. This is perfectly normal. Never

try to use excessive force to make the metal rod touch

the side legs of the chair as this can cause damage to

the chair and/or make it unstable.

XNEVER use the Tripp Trapp® chair without a glider.

WARNING!

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Stokke Tripp Trapp Barnmatstol. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Stokke. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Stokke Tripp Trapp Barnmatstol på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Stokke Barnmatstolar
Fler bruksanvisningar för Barnmatstolar

Vanliga frågor om Stokke Tripp Trapp Barnmatstol

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Stokke Steps Barnmatstol

Bruksanvisning

Stokke Clikk Barnmatstol

Bruksanvisning

Stokke Tripp Trapp Newborn Barnmatstol

Bruksanvisning

IKEA LANGUR Barnmatstol

Bruksanvisning

IKEA ANTILOP Barnmatstol

Bruksanvisning

Kinderkraft Enock Barnmatstol

Bruksanvisning

Chicco Bubble Nest Barnmatstol

Bruksanvisning

Joie Mimzy 360 Barnmatstol

Relaterade kategorier