Bruksanvisning Smeg SBC4604WNR Blastkylare

Behöver du en bruksanvisning för din Smeg SBC4604WNR Blastkylare? Nedan kan du se och ladda ner PDF-bruksanvisningen gratis på svenska. Den här produkten har för närvarande 0 vanliga frågor, 0 kommentarer och har 0 röster. Om det här inte är bruksanvisningen du vill ha, vänligen kontakta oss.

Är produkten defekt och erbjuder bruksanvisningen ingen lösning? Gå till ett Repair Café för gratis reparationstjänster.

Bruksanvisning

Loading…

USE - 1991477A874/B
e
"ACCESS POINT CHANGE COMPLETED
SUCCESSFULLY!".
The Connectivity icon (in the
information area at the top right) remains
on solid. The product Access Point Change
procedure has been completed.
Now the display of the appliance shows the
Settings menu. To activate the
Remote control (on some models only:
within the Connection menu ).
SmegConnect Menu
This menu allows you to display some
technical information about the
connection:
Cloud: Cloud connection status (Not
connected/Connected).
Wi-Fi: Access Point connection status
(not connected or the strength of the
signal when connected).
Access Point SSID: name of the Wi-Fi
network.
IPv4 network address: IPv4 address of
the Connectivity card.
IPv6 network address: IPv6 address of
the Connectivity card.
MAC address: MAC address of the
Connectivity card.
Wi-Fi FW release: FirmWare version of
the Connectivity card.
SW Compliance ID: identification of
compliance with the essential
requirements of the RED directive.
Information on the connection
Within the App, in the Settings menu of
the product pages you will find
information about the connection, such
as:
device registration date;
name of the network;
level of Wi-Fi signal;
MAC address of the Connectivity board;
Firmware version of the Connectivity
board;
IPv4 and IPv6 network addresses;
SW Compliance ID (identification of
compliance with the essential
requirements of the RED directive).
Deleting product
To delete the registration of the device
from the App:
•Go to the Settings menu on the App and
follow the instructions.
To cancel the registration of the appliance
on the product:
1. Tap the Settings button on the main
menu display on the device.
2. (on some models only) Select
Connection .
3. Select SmegConnect.
4. Tap the Registration button.
5. Tap the Basket button.
6. Tap the Confirm button to confirm
that you wish to cancel the registration.
Make sure that you activate the
Remote Control in order to control
the device via the App.
This information may be useful
when requesting assistance.
The product can be registered again
following the procedure described
above.
This procedure only deletes the
registration and restores the factory
settings for the SmegConnect
menu.
The deletion made on the appliance
does not require any connection to
the cloud.
This type of deletion only affects the
product, please delete the device
also from the App.
The product can be registered again
following the procedure described
above.
Ladda ner bruksanvisning i Engelska (PDF, 0.25 MB)
(Tänk på miljön och skriv endast ut denna bruksanvisning om det verkligen är nödvändigt)

Loading…

Betyg

Berätta vad du tycker om Smeg SBC4604WNR Blastkylare genom att betygsätta den. Vill du dela med dig av dina åsikter om denna produkt eller ställa en fråga? Lämna en kommentar nederst på sidan.
Är du nöjd med Smeg SBC4604WNR Blastkylare?
Ja Nej
Bli den första personen som betygsätter denna produkt
0 röster

Delta i konversationen om denna produkt

Här kan du dela vad du tycker om Smeg SBC4604WNR Blastkylare. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Smeg SBC4604WNR Blastkylare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Smeg. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Smeg SBC4604WNR Blastkylare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Märke Smeg
Modell SBC4604WNR
Kategori Blastkylare
Filtyp PDF
Filstorlek 0.25 MB

Alla bruksanvisningar för Smeg Blastkylare
Fler bruksanvisningar för Blastkylare

Bruksanvisning Smeg SBC4604WNR Blastkylare

Relaterade produkter

Relaterade kategorier

×
Download