Bruksanvisning Skil 1610 MA Betongblandare

Bruksanvisning

5

GB

Mixer 1610

INTRODUCTION

• This electronic mixer is intended to be used in

construction and industry for easily and simply blending

substances

• With various mixing paddles a variety of substances

(different sorts of cement blends, construction glues,

paints, levelling compounds, fi nishing and dry mortar,

etc.) can be mixed

• The recommended blending volume depends on the

type and state of the substance to be mixed

• Do not mix more than 40 litres of a substance at one

time

• Read and save this instruction manual 3

TECHNICAL SPECIFICATIONS 1

TOOL ELEMENTS 2

A Switch for on/off and speed control

B Button for switch locking

C Wheel for maximum speed control

D Protection frame

E Spindle

F Mixing paddle

G Ventilation slots

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious injury. The term “power tool” in all of the

warnings listed below refers to your mains operated

(corded) power tool. SAVE THESE INSTRUCTIONS.

1) WORK AREA

a) Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodifi ed plugs and matching outlets will reduce risk

of electric shock.

b) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

b) Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Avoid accidental starting. Ensure the switch is in the

off position before plugging in. Carrying power tools

with your fi nger on the switch or plugging in power tools

that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of these devices

can reduce dust related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before

making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Skil 1610 MA Betongblandare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Skil. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Skil 1610 MA Betongblandare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Skil Betongblandare
Fler bruksanvisningar för Betongblandare

Vanliga frågor om Skil 1610 MA Betongblandare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Skil 1609 AA Betongblandare

Bruksanvisning

Skil 1611 MA Betongblandare

Bruksanvisning

Skil 1612 MA Betongblandare

Bruksanvisning

Skil 1630 MA Betongblandare

Bruksanvisning

Skil 1016 AA Betongblandare

Bruksanvisning

Skil 1613 AA Betongblandare

Bruksanvisning

Skil 1640 MA Betongblandare

Bruksanvisning

Skil 1608 AA Betongblandare

Relaterade kategorier