Bruksanvisning SilverCrest IAN 279329 Hörlurar

Bruksanvisning

06/2016 – V 1.4

Congratulations on purchasing your new

device. You have chosen a quality

product.

These operating instructions are part of

the product. They contain important

information about the safety, use and

disposal of the device. Familiarise

yourself with all the operating instructions

and safety information before using this

product. Only use the product as

described and for the uses indicated. If

you give the product to someone else,

always pass on all the documentation.

Intended use

These headphones are a consumer

electronics device, intended for playing

music. They can also be used as a

headset with a smartphone. They may

only be connected to audio devices that

have a 3.5 mm jack socket for

headphones. They may only be used for

private purposes and are not for industrial

or commercial use. The headphones

should also not be used in tropical

climates. The manufacturer will not be

liable for any damage or faults arising as

a result of unauthorised modification of

the headphones. Please observe the

national regulations and/or laws of the

country in which the headphones are

used.

Package contents

 SilverCrest SKA 10 A1 headphones

 2 ear cushions (medium) fitted

 2 ear cushions (large)

 2 ear cushions (small)

 These instructions

Unpack the headphones and all of the

accessories. Remove all the packaging

materials and check that all the

components are present and

undamaged. If any parts are missing or

damaged, please contact the

manufacturer.

1 Ear cushions (medium)

2 Earbud

3 3.5 mm jack plug

4 Microphone

5 Multifunction button

6 Ear cushions (large)

7 Ear cushions (small)

Technical data

Impedance 16 Ohm

+/- 4 Ohm

Sensitivity 95 dB (A)

+/- 10%

at 1 kHz

Frequency range 20 Hz – 20 kHz

Wide band

characteristic

voltage

approx. 100 mV

+/- 20%

Connector 3.5 mm jack

Cable length approx. 125 cm

Weight approx. 13.5 g

Operating

temperature

5°C to 35°C

Storage

temperature

-10°C to 50°C

Humidity max. 85%

relative humidity

The specifications and design are subject

to change without notice.

Safety information

Before using the headphones for the first

time, read the following instructions

carefully and observe all warnings, even

if you are familiar with using electronic

devices. Keep this manual in a safe place

for future reference. If you give the

headphones away or sell them, please

ensure that you also pass on these

instructions, as they are part of the

product.

Symbols used and what they

mean

DANGER! This symbol, in

conjunction with the word

‘Danger’, indicates an

impending dangerous

situation which, if not

prevented, may lead to

serious injuries or even

death.

WARNING! This symbol,

in conjunction with the word

‘Warning’, indicates

important information for the

safe operation of the device

and user safety.

WARNING!

Please make sure that:

 the device is not exposed to direct

sources of heat (for example, heaters)

 the device is not exposed to direct

sunlight or strong artificial light

 contact with splashing and dripping

water and aggressive liquids is

avoided, and that the device is not

operated in the vicinity of water. In

particular, the device should never be

immersed, nor should any objects filled

with liquid, for example vases or drinks,

be placed on or near the device.

 the device is not placed close to

magnetic fields (for example,

loudspeakers)

 there are no naked flames (for

example, burning candles) placed on

or near the device

 no foreign bodies penetrate into the

device

 the device is not exposed to excessive

shocks and vibrations.

 you always take hold of the cable by

the plug; never pull on the cable itself.

Do not place any items of furniture or

other heavy objects on the cable.

Make sure that the cable is not bent,

particularly at the plug. Ensure that the

cable does not come into contact with

hot or sharp areas or edges in order to

avoid damage. Never make a knot in

the cable and do not connect it with

other cables. The cable should be

positioned in such a way that no one

steps on it or is obstructed by it.

DANGER! Children and

people with disabilities

Electrical devices must be kept out of the

reach of children. Children may not be

able to recognise hazards. In addition,

people with restricted physical, mental or

sensory abilities should only use electrical

devices appropriately. Never leave

children unattended with electrical

devices, unless they have been instructed

on their use or will be supervised by a

person responsible for their safety.

Children should generally be supervised

to ensure they do not play with this

device. Small parts can be lethal if

swallowed. Keep the packaging

film away from children.

There is a risk of

suffocation!

Listening at high volume can be

dangerous

Take care when using

headphones. Listening at

high volume for long

periods can damage your

hearing.

Do not use the headphones to listen at

high volume. You might damage your

hearing and disturb those around you.

Even though the device is designed to

allow you to hear ambient noise, set the

maximum volume so that you can still

hear what’s going on around you. Make

sure unusual ambient noise can be heard.

Do not use the device in dangerous

situations, for example when driving,

working with machinery or in other

situations that require your full

concentration. Sound through the

headphones may impair your

concentration or make you unaware of

what’s happening around you.

Initial use

Using the headphones

WARNING! So that you

do not damage your

hearing, minimise the

volume on the playback

device before you connect

the headphones. You can

then adjust the volume to the

required level.

You can use the headphones with any

audio device that has a 3.5 mm jack

socket for headphones.Plug the 3.5 mm

jack (3) into the corresponding socket on

your playback device. Set the volume to

the required level on the playback device.

Wear the earbud marked ‘L’ in your left

ear and the earbud marked ‘R’ in your

right ear.

Carefully push one of the earbuds into

your ear canal. To make this easier, you

can straighten the ear canal slightly by

pulling your ear gently up and down. Do

the same with the second earbud.

The microphone

The microphone integrated in the cable

allows you to communicate conveniently

when you are using the headphones as a

headset or with a hands-free kit.

Multifunction button on the

microphone

A multifunction button (5) is located on

the microphone (4).

Depending on the operating mode and

the audio source used, different actions

can be performed by pressing the

multifunction button (5), for example:

Short press during audio playback:

Pause/start playback.

Two presses in quick succession during

audio playback:

 Select next track.

Short press when using as a headset/with

hands-free kit:

 Accept call.

 With a call in progress, a short press

activates or deactivates mute mode

(microphone off).

 With a call in progress, a short press

ends the call.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din SilverCrest IAN 279329 Hörlurar. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar SilverCrest. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din SilverCrest IAN 279329 Hörlurar på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för SilverCrest Hörlurar
Fler bruksanvisningar för Hörlurar

Vanliga frågor om SilverCrest IAN 279329 Hörlurar

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.