Bruksanvisning Sierra Designs Clip 3 Tält

Bruksanvisning

S I E R R A D E S I G N S

SIERRA DESIGNS 2011 Cherry Street, Unit 202 Louisville, CO 80027 Phone: 303-262-3050 Fax: 303-262-3051 Toll Free: 800-635-0461

Erect the Tent

Insert the metal tips of the longer “front arch” pole into the

grommets at points C and D (Figure 3). Clip the 2 Cam-Locs

™

located above the door at points I and J onto the center section

of the pole, taking care not to twist the webbing which con-

nects the Cam-Loc to the tent. Do not engage the Cam-Loc at

this time. Attach the remaining Swift Clips

™

, following the

seam along the path of the pole, between points C and D. Now,

insert the metal tips of

the shorter “rear pole”

into the grommets at

points E and F. Attach

the Cam-Locs at points

K and L and Swift Clips

to this pole in the same

manner as the front

pole. Once all the clips

are attached to both poles you may engage the Cam-Locs by

turning the key 180° until they lock completely onto the pole.

When the Cam-Loc is engaged the key should be horizontal.

(Figure 4).

Flysheet

Drape the fly over the tent and position the zipper over the

tent door (Figure 5). At points C, D, G and H are 1" side-

release “fly clip” buckles. Clip these buckles into their

corresponding mates on the tent floor and pull the straps until

the fly is taut (Figure 6). By first clipping the blue webbing

strap on the rainfly to a blue webbing strap on the body, you

are guaranteed a fast, proper rainfly set-up every time. Now

pull points A and B out until the vestibule is taut and stake it

down in that position. You can use a guy line to guy out the fly

at points I, J, and K for increased ventilation.

Figure 5: Flysheet (top view)

Ventilation

The best air flow through the tent is obtained by pitching the

tent with the foot area into the wind. With the rainfly on, air-

flow is increased by guying out the rainfly away from the tent

walls. Note that the door can be folded back and tied in an

open position.

First Pitch

In order to familiarize yourself with your new tent, we suggest

that you “test pitch” it before embarking on a wilderness trip.

Select a Site

Look for a level spot that is protected from the wind in

order to ensure sleeping comfort. Clear the area of debris such

as sharp stones and sticks which might abrade or puncture the

tent floor. Choose an area that will drain well when it rains.

Unfurl the Tent and Assemble the Poles

Unfurl the tent and lay the tent floor flat on the ground with

the door unzipped. Carefully unfold the shock corded pole sec-

tions, and allow them to slide together. Do not allow the poles

to snap together. This can lead to serious pole damage. Make

certain that the insert of each pole section is fully inserted into

the next pole section (Figure 1). You will have one long “front

arch” pole and one short “rear arch” pole (Figure 2).

Figure 1: Correct Pole Assembly

Figure 2: Arch Poles

Stake Out the Tent Floor

First stake down the webbing loops at the back of the tent at

points G and H (Figure 3). Then move to the front of the tent

and pull the webbing loops at points A and B until the floor

is squarely and semi-tautly positioned, and stake them down.

Staking out points C, D, E and F is recommended, especially

in high winds.

CLIP 3

Your Sierra Designs

CLIP 3 tent is very easy

to pitch and maintain.

Follow these instructions to

pitch your tent quickly,

safely and easily.

Figure 3: Tent Body (top view)

CLIP 3 TENT CONTENTS

Tent Body & Rainfly: 1 Pitching Instructions: 1

Tent Poles: 2 Stake Sack: 1

Tent Stakes: 9* Pole Sack: 1

Guy Cord: 2

* Sierra Designs tents include stakes for pitching the body and fly under normal conditions.

Additional stakes may be required in severe conditons.

Figure 4 Cam-Loc

™

Figure 6: Fly Clip

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Sierra Designs Clip 3 Tält. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Sierra Designs. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Sierra Designs Clip 3 Tält på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Sierra Designs Tält
Fler bruksanvisningar för Tält

Vanliga frågor om Sierra Designs Clip 3 Tält

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Sierra Designs Nomad 4.2 Tält

Bruksanvisning

Sierra Designs Electron RC 2 Tält

Bruksanvisning

Sierra Designs Hercules 3 AST Tält

Bruksanvisning

Sierra Designs Origami 4 Tält

Bruksanvisning

Sierra Designs Orion III AST Tält

Bruksanvisning

Sierra Designs Meteor Light CD Tält

Bruksanvisning

Sierra Designs Lightning HT 2 Tält

Bruksanvisning

Sierra Designs Velox 1 Tält

Relaterade kategorier