Bruksanvisning Shindaiwa 452s Kedjesåg

Bruksanvisning

3

Kickback Safety

WARNING!

Kickback

can happen

lightning-fast!

This saw is equipped with the following

safety equipment:

1. Inertia chain brake.

n Activating the chain brake tightens

a brake band around the chain drive

mechanism, stopping all chain

rotation. When sudden kickback

occurs, the chain break is automati-

cally actuated and the chain stops

instantly. The chain brake can also be

activated manually.

WARNING!

To reduce the risk of

kickback, all of the above

devices must be properly installed

and in good repair!

WARNING!

Brake engagement and

operation depend upon

proper chain break condition! For

proper chain brake testing and

adjustment procedures, refer to

Page 11.

Either of the following reactions could

cause you to lose control of your saw

while cutting, possibly resulting in

serious injury!

1. Kickback can occur whenever the

guide bar nose or tip contact an object

while the saw is running. Tip contact

may cause the guide bar to kick

upward and back toward the operator

with a lightning-fast reaction!

2. Pinching the saw along the top of the

guide bar may push the guide bar

rapidly back toward the operator!

Pinching can occur whenever wood

closes in around the moving chain!

Do not rely exclusively on the safety

devices incorporated with your saw. As a

chain saw user, observing the following

steps will also help you to avoid accident

or injury on the job:

Kickback Safety Precautions

n Grip the saw firmly with your right

hand on the rear handle and your left

hand on the front handle, thumbs

and fingers encircling the handles

whenever the saw is running. Don’t

let go: A firm grip will help you to

reduce kickback while maintaining

control of the saw.

n Accelerate the saw before the

chain contacts the work area, and

always maintain high engine speeds

throughout the cut.

n Sudden surprise can contribute to ac-

cidents! With a basic understanding of

kickback, you can reduce or eliminate

the element of surprise.

n Clear obstructions from the work

area before cutting. Remove any log,

branch, or other obstruction that

might contact the guide bar tip during

cutting operations.

n Do not overreach or attempt to cut

above shoulder height.

n Follow the manufacturer’s

instructions for sharpening and

maintenance of the saw chain.

n Use only the replacement bar and

chain combinations specified by the

manufacturer.

n Never stand directly over the saw

while cutting!

n Use low-kickback chain, chain brakes,

or special guide bars to reduce the

risk of kickback.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Shindaiwa 452s Kedjesåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Shindaiwa. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Shindaiwa 452s Kedjesåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Shindaiwa Kedjesågar
Fler bruksanvisningar för Kedjesågar

Vanliga frågor om Shindaiwa 452s Kedjesåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Shindaiwa 269Ts Kedjesåg

Bruksanvisning

Shindaiwa 320Ts Kedjesåg

Bruksanvisning

Shindaiwa 402s Kedjesåg

Bruksanvisning

Shindaiwa 269TCs Kedjesåg

Bruksanvisning

Shindaiwa 358Ts Kedjesåg

Bruksanvisning

Shindaiwa 305s Kedjesåg

Bruksanvisning

Shindaiwa 491s Kedjesåg

Bruksanvisning

Shindaiwa 340s Kedjesåg

Relaterade kategorier