Bruksanvisning Sandstrøm SVDB12E Radio

Bruksanvisning

10

GB

Activating the Alarm Function

1. To activate the alarm function, repeatedly press the ALARM/SNOOZE button. The

alarm wake-up modes will be displayed and change in the below sequence on every

press:

Alarm Off DAB Preset # FM Preset # Buzzer Tone #

2. When the display shows your desired alarm wake-up mode, stop pressing the ALARM/

SNOOZE button. The alarm function is now activated and an alarm icon will be

displayed.

3. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon

in the display will ash to indicate that the alarm is triggered. To stop the alarm sooner,

press the

button.

4. To check the alarm status, press the ALARM/SNOOZE button. The alarm status will

show on the display.

• If you have activated the alarm function and the wake-up mode is DAB or FM, make sure that the

volume is at a sucient level for you to hear.

• If the wake-up mode is DAB and the DAB signal strength is low, the buzzer alarm will be triggered.

Automatic Alarm Repeat

The alarm will automatically repeat each day at the selected time as long as the alarm icon

is displayed. To cancel this function, repeatedly press the ALARM/SNOOZE button until

“Alarm O” shows on the display.

Snooze Function

When the alarm has gone o, press the ALARM/SNOOZE button to temporarily switch o

the alarm for 5 minutes. The display will show “z” to indicate that snooze is on. The snooze

function will continue for 1 hour from the set alarm time.

To cancel snooze mode press standby to turn the unit on then turn radio o. The alarm will

be ready for the following day.

Sleep Function

This function allows you to programme the unit to turn to standby mode by itself after a set

period of time.

1. To activate the sleep function, press the SLEEP button repeatedly. The “Sleep Timer”

will show on the display. The time will change in the below sequence on every press:

90 80 70 60 30 10

2. When your desired sleep time appears in the display, stop pressing the button and the

sleep function will be activated in two seconds. “s”will be displayed on the display.

3. When the sleep time counts to zero, the unit will turn to standby mode. To turn the

sleep function o while the sleep timer is still counting down, press the SLEEP button

once, “s”will disappear from the display.

4. Press the INFO button repeatedly to show the sleep timer status on the display when

it is turned on.

SVDB_W12E_IB_RC_Final121106.indb 10 7/11/12 4:56 PM

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Sandstrøm SVDB12E Radio. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Sandstrom. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Sandstrøm SVDB12E Radio på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Sandstrøm Radio
Fler bruksanvisningar för Radio

Vanliga frågor om Sandstrøm SVDB12E Radio

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Sandstrøm S1RADWW11E Radio

Bruksanvisning

Sandstrøm SJUPWH14E Radio

Bruksanvisning

Sandstrøm S2RADRB12E Radio

Bruksanvisning

Sandstrøm SJUMBL14E Radio

Bruksanvisning

Sandstrøm S1RADWN11E Radio

Bruksanvisning

Sandstrøm SVDIRB12E Radio

Bruksanvisning

Sandstrøm S1DAB11E Radio

Bruksanvisning

Sandstrøm S3DABWI11E Radio

Relaterade kategorier