Bruksanvisning Ryobi BD4601G Bandslipar

Bruksanvisning

2 - English

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow

all instructions listed below, may result in electric shock,

fire and/or serious personal injury.

READ ALL INSTRUCTIONS

WORK AREA

 KNOW YOUR POWER TOOL. Read the operator’s

manual carefully. Learn the applications and limitations

as well as specific potential hazards related to this tool.

GUARD AGAINST ELECTRICAL SHOCK BY

PREVENTING BODY CONTACT WITH GROUNDED

SURFACES. For example: pipes, radiators, ranges, re-

frigerator enclosures.

KEEP GUARDS IN PLACE and in working order.

REMOVE ADJUSTING KEYS AND WRENCHES. Form

habit of checking to see keys and adjusting wrenches are

removed from tool before turning it on.

 KEEP THE WORK AREA CLEAN. Cluttered work areas

and work benches invite accidents. DO NOT leave tools

or pieces of wood on the tool while it is in operation.

DO NOT USE IN DANGEROUS ENVIRONMENTS. Do

not use power tools in damp or wet locations or expose

them to rain. Keep the work area well lit.

KEEP CHILDREN AND VISITORS AWAY. All visitors

should wear safety glasses and be kept a safe distance

from work area. Do not let visitors contact tool or exten-

sion cord while operating.

MAKE WORKSHOP CHILDPROOF with padlocks,

master switches, or by removing starter keys.

DON’T FORCE THE TOOL. It will do the job better and

safer at the rate for which it was designed.

USE THE RIGHT TOOL. Do not force the tool or attach-

ment to do a job for which it was not designed.

USE THE PROPER EXTENSION CORD. Make sure your

extension cord is in good condition. Use only a cord heavy

enough to carry the current your product will draw. An

undersized cord will cause a drop in line voltage result-

ing in loss of power and overheating. A wire gauge size

(A.W.G.) of at least 16 is recommended for an extension

cord 50 feet or less in length. If in doubt, use the next

heavier gauge. The smaller the gauge number, the heavier

the cord.

DRESS PROPERLY. Do not wear loose clothing, gloves,

neckties, or jewelry. They can get caught and draw you

into moving parts. Also wear protective hair covering to

contain long hair.

ALWAYS WEAR SAFETY GLASSES WITH SIDE

SHIELDS. Everyday eyeglasses have only impact-resis-

tant lenses, they are NOT safety glasses.

SECURE WORK. Use clamps or a vise to hold work when

practical, it is safer than using your hand and frees both

hands to operate the tool.

DO NOT OVERREACH. Keep proper footing and balance

at all times.

MAINTAIN TOOLS WITH CARE. Keep tools sharp and

clean for best and safest performance. Follow instructions

for lubricating and changing accessories.

DISCONNECT TOOLS. When not in use, before servic-

ing, or when changing attachments, blades, bits, cutters,

etc., all tools should be disconnected from power source.

AVOID ACCIDENTAL STARTING. Be sure switch is off

when plugging in any tool.

USE RECOMMENDED ACCESSORIES. Consult the

operator’s manual for recommended accessories. The

use of improper accessories may result in injury.

NEVER STAND ON TOOL. Serious injury could occur if

the tool is tipped.

 CHECK DAMAGED PARTS. Before further use of the

tool, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment

of moving parts, binding of moving parts, breakage of

parts, mounting and any other conditions that may affect

its operation. A guard or other part that is damaged must

be properly repaired or replaced by an authorized service

center to avoid risk of personal injury.

USE THE RIGHT DIRECTION OF FEED. Feed work into

a blade, cutter, or sanding spindle against the direction

of rotation of the blade, cutter, or sanding spindle only.

NEVER LEAVE TOOL RUNNING UNATTENDED. TURN

THE POWER OFF. Don’t leave tool until it comes to a

complete stop.

PROTECT YOUR LUNGS. Wear a face or dust mask if

the cutting operation is dusty.

PROTECT YOUR HEARING. Wear hearing protection

during extended periods of operation.

DO NOT ABUSE CORD. Never carry tool by the cord or

yank it to disconnect from receptacle. Keep cord from

heat, oil, and sharp edges.

 USE OUTDOOR EXTENSION CORDS. When tool

is used outdoors, use only extension cords with

approved ground connection that are intended for use

outdoors and so marked.

KEEP BLADES CLEAN, SHARP, AND WITH

SUFFICIENT SET. Sharp blades minimize stalling

and kickback.

 NEVER USE IN AN EXPLOSIVE ATMOSPHERE.

Normal sparking of the motor could ignite fumes.

 INSPECT TOOL CORDS PERIODICALLY. If dam-

aged, have repaired by a qualified service technician at

an authorized service facility. The conductor with insula-

tion having an outer surface that is green with or without

yellow stripes is the equipment-grounding conductor. If

repair or replacement of the electric cord or plug is neces-

sary, do not connect the equipment-grounding conductor

to a live terminal. Repair or replace a damaged or worn

cord immediately. Stay constantly aware of cord location

and keep it well away from the rotating blade.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Ryobi BD4601G Bandslipar. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Ryobi. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Ryobi BD4601G Bandslipar på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Ryobi Bandslipar
Fler bruksanvisningar för Bandslipar

Vanliga frågor om Ryobi BD4601G Bandslipar

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Ryobi EBS-9576V Bandslipar

Bruksanvisning

Ryobi EBS800 Bandslipar

Bruksanvisning

Ryobi EBS-1310V Bandslipar

Bruksanvisning

Ryobi EBS-7576 Bandslipar

Bruksanvisning

Ryobi EBS-8021V Bandslipar

Bruksanvisning

Ryobi EBS800V Bandslipar

Bruksanvisning

Ryobi R18PF-0 Bandslipar

Bruksanvisning

Ryobi R18BS-0 Bandslipar

Relaterade kategorier