Home > Kontorsmaterial > Lamineringsmaskiner > Renkforce Lamineringsmaskiner > Renkforce RL-350 Lamineringsmaskin

Bruksanvisning Renkforce RL-350 Lamineringsmaskin

Behöver du en bruksanvisning för din Renkforce RL-350 Lamineringsmaskin? Nedan kan du se och ladda ner PDF-bruksanvisningen gratis på svenska. Den här produkten har för närvarande 0 vanliga frågor, 0 kommentarer och har 0 röster. Om det här inte är bruksanvisningen du vill ha, vänligen kontakta oss.

Är produkten defekt och erbjuder bruksanvisningen ingen lösning? Gå till ett Repair Café för gratis reparationstjänster.

Bruksanvisning

• Make sure, that the power cable is not jammed, buckled, damaged by sharp edges

or mechanically stressed. Avoid excessive thermal stressing of the power cable

due to extreme heat or cold. Do not modify the power cable. Otherwise the power

cable can be damaged. A damaged power cable can lead to a fatal electric shock.

• Do not touch the power cable if it has been damaged. First disconnect the

associated power outlet from the power supply (e.g. with the respective fuse) and

then carefully pull the mains plug out of the power outlet. Never set the product

into operation if the power cable is damaged.

• To avoid any hazards a damaged power cable may only be replaced by the

manufacturer, a workshop authorized by the manufacturer or a similarly qualied

person.

• Never touch the mains plug with wet hands!

• Before connecting the product to the power supply, check whether the type of

current and supply voltage correspond with the details on the rating plate.

• The product gets hot during operation. Ensure adequate ventilation and never

cover the product during operation.

• Never use the product immediately after it has been brought from a cold room

into a warm one. The condensation generated could destroy the product. Allow

the device to reach room temperature before connecting and using it. This may

take several hours.

• Never spill liquids over electrical devices and never place objects lled with liquids

near the device. If liquid or an object enters the interior of the device nevertheless,

rst power down the respective socket (e.g. switch off circuit breaker) and then

pull the mains plug from the mains socket. Do not operate the product anymore

afterwards, but take it to a specialist workshop.

• The use of electrical devices in schools, training facilities, hobby- and do-it-

yourself workshops must be supervised by trained personnel.

• In commercial facilities, observe all applicable accident prevention regulations for

electrical installations and operating equipment.

• Consult an expert when in doubt about operation, safety or connection of the

device.

• Maintenance, modications and repairs are to be performed exclusively by an

expert or at a qualied shop.

• If you have questions which remain unanswered by these operating instructions,

contact our technical support service or other technical personnel.

Operating elements

EN TE R

BUS IN ESS

CAR D

BUS IN ESS

CAR D

REA DY

POW ER

Off

80M ic

125 Mi c

1 2

3456

1 Release switch

2 Power cable

3 Operating switch

4 POWER indicator lamp

5 READY indicator lamp

6 Input slot

Operating instructions

Laminator

Item no. 1486147 (RL-350)

Item no. 1486148 (RL-450)

Intended use

The product is used for the nishing or the protection of documents and photos with suitable

laminating pouches (not included in the scope of supply). It can hot laminate and is equipped

with an anti-lm jam release switch. The operating state is indicated by two LEDs. The power is

supplied via a common household power outlet. The product is protected against overheating.

It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in

bathrooms, must be avoided under all circumstances.

For safety and approval purposes, you must not rebuild and/or modify this product. If you use

the product for purposes other than those described above, the product may be damaged.

In addition, improper use can cause hazards such as short circuiting, re, electric shock etc.

Read the instructions carefully and keep them. Make this product available to third parties only

together with its operating instructions.

This product complies with the statutory national and European requirements. All company

Delivery content

• Laminator

• Operating instructions

Up-to-date operating instructions

Download the latest operating instructions from our website www.conrad.com/downloads or

scan the printed QR code. Follow the instructions on the website.

Description of symbols

The symbol with a ash in a triangle indicates health risks e.g. due to electric shock.

The symbol with an exclamation mark in a triangle indicates important instructions

contained in these operating instructions that must be followed.

The "arrow" symbol alerts the user to the presence of important tips and notes on

using the device.

Safety instructions

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information on

proper handling in this manual, we assume no liability for any resulting

personal injury or damage to property. Such cases will invalidate the warranty/

guarantee.

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. These may become

dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high

humidity, moisture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and

protect it from any accidental use. Safe operation can no longer be guaranteed

if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height

can damage the product.

• The power outlet must be situated close to the device and always be easily

accessible.

• Never use the supply line to pull the mains plug out of the power outlet. Always

pull it out of the mains power outlet with the gripping surfaces provided for this

purpose.

• If you do not use the product for a prolonged period, pull the mains plug out of

the power outlet.

• For reasons of safety, pull the mains plug out of the power outlet during a

thunderstorm.

Ladda ner bruksanvisning i Engelska (PDF, 0.44 MB)

(Tänk på miljön och skriv endast ut denna bruksanvisning om det verkligen är nödvändigt)

Betyg

Berätta vad du tycker om Renkforce RL-350 Lamineringsmaskin genom att betygsätta den. Vill du dela med dig av dina åsikter om denna produkt eller ställa en fråga? Lämna en kommentar nederst på sidan.

Är du nöjd med Renkforce RL-350 Lamineringsmaskin?
Ja Nej

Bli den första personen som betygsätter denna produkt

0 röster

Delta i konversationen om denna produkt

Här kan du dela vad du tycker om Renkforce RL-350 Lamineringsmaskin. Om du har en fråga, läs först noggrant igenom manualen. Att begära en manual kan göras genom att använda vårt kontaktformulär.

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Renkforce RL-350 Lamineringsmaskin. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Renkforce. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Renkforce RL-350 Lamineringsmaskin på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.