Bruksanvisning Pro-Ject Debut Carbon Esprit Skivspelare

Bruksanvisning

© Audio Trade GmbH · Pro-Ject Debut Carbon Esprit / Ortofon 2M Red · Revision 2012.11.15

5

Mains power connection

Connect the mains lead to the mains.

Fitting the lid

Fit the lid (dust cover 10) carefully over the hinge prongs and adjust the screws (12) until the lid stays open

where you want it to without being too stiff to open or close.

Switching on and off

Pressing the power switch (19) alternately starts or stops the motor.

Changing replay speed

To play records at 45 r.p.m. first remove the platter (5). Using the accessory tool provided (3a), hook the belt

(3) over the larger diameter part of the motor pulley (2). Refit the platter. To revert to 33 r.p.m. repeat the

proceedings using the smaller step on the pulley.

When the Pro-Ject Speed Box SE is used speed change between 33 and 45 r.p.m. is electronic. There

is no need to move the belt manually.

*** In addition, 78 r.p.m. is available after fitting a special pulley, which may be purchased as an

optional extra.

For detailed product information please refer to the Pro-Ject web site www.project-audio.com.

Useful tips

The record player should be positioned on a low-resonance surface such as wood or multiple layer ply board

to avoid structural vibrations disturbing replay.

Adjusting the azimuth

** The cartridge needle must be vertical in the record groove in order to trace the

groove wall modulations correctly.

A small screw at the bearing end of the arm allows incorrect azimuth to be

corrected if your needle is not mounted exactly perpendicular to the cartridge body

(which is often the case).

Slacken off the screw just enough to be able to revolve the arm tube without

applying force. Please note: do not remove the screw completely!

Screw

With the aid of a good magnifying glass adjust the needle until it is vertical in the groove (i.e. perpendicular

to the record's surface). Ideally this should correspond to the top surface of the cartridge body being parallel

to the record surface.

When you are satisfied that the needle is vertical retighten the screw carefully.

Please note: Under no circumstances should the arm tube be adjusted with the needle still in the

record groove! Irreparable damage may be caused to the cantilever suspension! The arm must be

lifted to make each adjustment and lowered afterwards to check it.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Pro-Ject Debut Carbon Esprit Skivspelare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Pro-Ject. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Pro-Ject Debut Carbon Esprit Skivspelare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Pro-Ject Skivspelare
Fler bruksanvisningar för Skivspelare

Vanliga frågor om Pro-Ject Debut Carbon Esprit Skivspelare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Pro-Ject 1Xpression III Skivspelare

Bruksanvisning

Pro-Ject 1Anniversary Skivspelare

Bruksanvisning

Pro-Ject Debut Carbon Phono USB Skivspelare

Bruksanvisning

Pro-Ject RPM 9.2 Evolution Skivspelare

Bruksanvisning

Pro-Ject Essential II Skivspelare

Bruksanvisning

Pro-Ject Essential II Phono USB Skivspelare

Bruksanvisning

Pro-Ject RPM 1.3 Genie Skivspelare

Bruksanvisning

Pro-Ject RPM 5.1 Skivspelare

Relaterade kategorier