Bruksanvisning Philips SBC RU 660 Fjärrkontroll

Bruksanvisning

4 Press the power key to start the search. Make sure that you

keep the remote control pointed at your equipment.

– Each time the green LED flashes, another code is sent.

When the right code is found, the equipment switches off.

Immediately press the power key to stop the search.

If the green LED flashed again after the equipment

switched off, this means you missed the correct code! If

you missed the code, follow the next proccedure, starting

at step 5. If the LED did not flash again after the

equipment switched off, go to step 7.

5 Switch the equipment manually back on.

6 Press ‘PROG-’ (down only!) repeatedly to send previous

codes until the equipment switches off again.

7 Press the power key to lock the correct code in the SBC

RU660’s memory.

– The green LED flashes twice.

C

HECK

Switch equipment on manually. Press a few keys to check correct

response. If response is not correct, repeat procedure beginning

at step 1.

N

OTE

- The search time averages about 90 seconds. (Maximum search

time is 5 minutes for TV, 2 minutes for VCR, 4 minutes for SAT

and 3 minutes for CD/AUDIO).

- Autosearch stops automatically after all codes have been

tested.

MAKE A NOTE OF YOUR CODE!

A

DVICE

Carefully read the complete procedure before starting!

Note the code inside the battery case and in the codelist in

the centre of this booklet. This may be useful if you ever need

to set up the SBC RU660 again. You used the auto search

procedure or you forgot to note the code after set up? No

problem! You can still ‘read out’ the code from the remote:

1 Make sure you’ve selected the right mode with the mode

selector key.

2 Press and release keys 1 and 6 simultaneously.

Important: after pressing the keys, you have to release them

immediately!

– The green LED lights up.

3 Press the two digits key.

– The green LED goes out.

4 Press key 1 and count the number of times the green LED

flashes. This is the first digit of the 3-digit code. (No

flashes means the digit is zero.)

5 Press key 2 and count the number of flashes for the second

digit.

6 Press key 3 and count the number of flashes for the third

digit.

7 Note the code.

Instructions for use

5

English

SET-UP FOR USE

A DVICE

Carefully read the complete procedure before starting!

Your equipment is a Philips brand:

1 Press the mode selector key for the device you want to

operate.

2 Press the power key to test.

– The green indicator LED under each device (TV, VCR, SAT,

CD, AUDIO1, AUDIO2) lights up to confirm the mode

you’re in.

C HECK

Press a few keys to check correct response.

Your equipment is of another brand, or your

equipment is a Philips brand, but not all keys

respond correctly:

1 Press the mode selector key to select the device (TV, VCR,

SAT, CD, AUDIO1, AUDIO2) you want to operate.

2 Look up the brand name of the device you want to

operate in the code list (centre of this manual).

Make sure you choose the correct code list for your device!

3 Make sure the device is switched on.

4 Press and hold keys 1 and 3 simultaneously - for about

three seconds- until the green LED lights up. (Release the

keys: the green LED should stay on)

5 Enter your 3-digit code using the number keys, within

30 seconds.

– The green LED flashes twice.

C HECK

That’s it! Press a few keys to check correct response. If

response is not correct, repeat procedure beginning at step 1.

N OTE

- If the LED displays one long flash, the code was not

recognised. Please go back to step 1 and repeat the

procedure, using the next 3-digit code in the list.

- If no key is pressed within 30 seconds, you have to start

again at step 1.

A DVICE

Carefully read the complete procedure before starting!

You do not know the brand of your

equipment/you can not find the right code in

the code list » auto search:

1 Press the mode selector key to select the device (TV, VCR,

SAT, CD, AUDIO1, AUDIO2) you want to operate.

2 Make sure the device is switched on (if the device is a

VCR, please insert a tape and start playback).

3 Press and hold keys 1 and 3 simultaneously -for about

three seconds- until the green LED lights up.

(Release the keys: the green LED should stay on)

Instructions for use

English

4

1

9

-

1

3

TV

VCR

SAT

AUDIO 1

AUDIO 2

CD

TV

VCR

SAT

AUDIO 1

AUDIO 2

CD

TV

VCR

SAT

AUDIO 1

AUDIO 2

CD

1

3

PROG

1

6

1

2

3

TV

VCR

SAT

AUDIO 1

AUDIO 2

CD

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Philips SBC RU 660 Fjärrkontroll. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Philips. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Philips SBC RU 660 Fjärrkontroll på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Philips Fjärrkontroller
Fler bruksanvisningar för Fjärrkontroller

Vanliga frågor om Philips SBC RU 660 Fjärrkontroll

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Philips SRU740 Fjärrkontroll

Bruksanvisning

Philips SRU5106 Fjärrkontroll

Bruksanvisning

Philips REM400 Fjärrkontroll

Bruksanvisning

Philips SBC RU 520 Fjärrkontroll

Bruksanvisning

Philips SBC RU 620 Fjärrkontroll

Bruksanvisning

Philips SRU5170 Fjärrkontroll

Bruksanvisning

Philips SRU5030 Fjärrkontroll

Bruksanvisning

Philips SBC RU 530 Fjärrkontroll

Relaterade kategorier