Bruksanvisning Philips SBC RU 110 Fjärrkontroll

Bruksanvisning

3

RU240- page 3

If you know the brand of your equipment, look at the code list at the

back of this booklet, and find the first 5-digit code for your equipment.

1 Press and hold s and y at the same time until the green LED lights

up. (Release the keys, the green LED should stay on)

2 Enter the 5-digit code using the numbers that correspond to the

function keys (see diagram). The green LED blinks twice.

That's it! Now, press a few keys on the remote to check that the

equipment responds correctly. If it doesn't, try again using the next code

in the list. In the rare instance that none of the codes work, follow the

instructions in the next section.

Tip: Make a note of the code inside the battery case, and in the back of

this booklet in case you ever need to setup again.

If you don't know the brand of your equipment or if you can not find

it in the codelist, setup still won't take long. Philips' patented Handsfree

autosearch tests all the codes one after another and finds the right one

for you! The search time averages about 90 seconds. (Maximum search

time is 5 minutes for TV.)

Make sure the TV is switched on. You will know when the correct code

has been found because the equipment will switch off.

1 Press and hold s and y at the same time until the green LED lights

up.

2 Press y to start the search. Each time the green LED blinks, another

code is sent. When the right code is found, the equipment switches

off.

3 Immediately press y to stop the search.

If you missed the correct code because the search went too far, switch

the equipment back on, the press -P (down) to send the previous code

again. Press -P (down) repeatedly until the equipment switches off

again.

4 Once you've found the correct code, press y to lock it in memory.

The green LED blinks twice.

That's it! Now, switch the equipment manually on again, then press a

few keys on the remote to check that the equipment responds correctly.

In the rare instance that it doesn't, try again from step 1 to find a better

code.

Note that code! To save time if you ever need to setup again, make a

note of the correct code inside the battery case and in the back of this

booklet. In case you have forgotten to note the code you can still 'read

out' the code from the remote. Here's how:

1 Press and release s and y at the same time; the green LED lights

up.

2 Press

s . The green LED goes out.

3 Press

+P and count the number of times the green LED blinks. This

is the first digit of the 5-digit code. (No blinks means the digit is

zero.)

Press -P and count the number of blinks for the second digit.

English

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Philips SBC RU 110 Fjärrkontroll. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Philips. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Philips SBC RU 110 Fjärrkontroll på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Philips Fjärrkontroller
Fler bruksanvisningar för Fjärrkontroller

Vanliga frågor om Philips SBC RU 110 Fjärrkontroll

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Philips SRU5010 Fjärrkontroll

Bruksanvisning

Philips SRM7500 Fjärrkontroll

Bruksanvisning

Philips SRU3004 Fjärrkontroll

Bruksanvisning

Philips RC2573GR Fjärrkontroll

Bruksanvisning

Philips SRU4010 Fjärrkontroll

Bruksanvisning

Philips SRP2008B Fjärrkontroll

Bruksanvisning

Philips SRU3006L Fjärrkontroll

Bruksanvisning

Philips SRU740 Fjärrkontroll

Relaterade kategorier