Bruksanvisning Parkside IAN 504705 Skruvdragare

Bruksanvisning

1

parts. Loose clothes,

jewellery or long hair

can be caught in

moving parts.

g) If devices are provi-

ded for the connec-

tion of dust extrac-

tion and collection

facilities, ensure

these are connected

and properly used.

Use of dust collection

can reduce dust‑re‑

lated hazards.

h) Do not let familiarity

gained from fre-

quent use of tools

allow you to beco-

me complacent and

ignore tool safety

principles. A care‑

less action can cause

severe injury within a

fraction of a second.

Power tool use and

care

a) Do not force the

power tool. Use the

correct power tool

for your application.

The correct power

tool will do the job

better and safer at

the rate for which it

was designed.

o‑position befo-

re connecting to

power source and/

or battery pack, pi-

cking up or carrying

the tool. Carrying

power tools with your

nger on the switch

or energising power

tools that have the

switch on invites

accidents.

d) Remove any adjus-

ting key or wrench

before turning the

power tool on. A

wrench or a key left

attached to a rotating

part of the power tool

may result in person‑

al injury.

e) Do not overreach.

Keep proper footing

and balance at all

times. This enables

better control of

the power tool

in unexpected

situations.

f) Dress properly.

Do not wear loose

clothing or jewelle-

ry. Keep your hair,

clothing and gloves

away from moving

protected supply.

Use of an RCD

reduces the risk of

electric shock.

Personal safety

a) Stay alert, watch

what you are

doing and use

common sense

when operating a

power tool. Do not

use a power tool

while you are tired or

under the inuence

of drugs, alcohol

or medication.

A moment of

inattention while

operating power tools

may result in serious

personal injury.

b) Use personal

protective

equipment. Always

wear eye protection.

Protective equipment

such as dust mask,

non‑skid safety

shoes, hard hat, or

hearing protection

used for appropriate

conditions will reduce

personal injuries.

c) Prevent unintentio-

nal starting. Ensure

the switch is in the

electric shock if your

body is earthed or

grounded.

c) Do not expose pow-

er tools to rain or

wet conditions. Wa‑

ter entering a power

tool will increase the

risk of electric shock.

d) Do not abuse the

cord. Never use the

cord for carrying,

pulling or unplug-

ging the power tool.

Keep cord away

from heat, oil, sharp

edges or moving

parts. Damaged

or entangled cords

increase the risk of

electric shock.

e) When operating a

power tool out-

doors, use an exten-

sion cord suitable

for outdoor use. Use

of a cord suitable for

outdoor use reduces

the risk of electric

shock.

f) If operating a

power tool in a

damp location is

unavoidable, use

a residual current

device (RCD)

b) Do not operate

power tools in ex-

plosive atmosphe-

res, such as in the

presence of am-

mable liquids, gases

or dust. Power tools

create sparks which

may ignite the dust or

fumes.

c) Keep children and

bystanders away

while operating a

power tool. Distrac‑

tions can cause you

to lose control.

Electrical safety

a) Power tool plugs

must match the

outlet. Never modify

the plug in any way.

Do not use any

adapter plugs with

earthed (grounded)

power tools. Un‑

modied plugs and

matching outlets will

reduce risk of electric

shock.

b) Avoid body contact

with earthed or

grounded surfaces,

such as pipes, ra-

diators, ranges and

refrigerators. There

is an increased risk of

Safety

instructions

 General pow-

er tool safety

warnings

m

WARNING!

u Read all safety

warnings,

instructions,

illustrations and

specications

provided with this

power tool. Failure

to follow all

instructions listed

below may result

in electric shock,

re and/or serious

injury.

Save all warnings and

instructions for future

reference.

The term “power tool”

in the warnings refers

to your mains‑operated

(corded) power tool or

battery‑operated (cord‑

less) power tool.

Work area safety

a) Keep work area

clean and well lit.

Cluttered or dark are‑

as invite accidents.

NOTE

u The declared

vibration total value

and the declared

noise emission

value have been

measured in

accordance with

a standard test

method and

may be used for

comparing one tool

with another.

u The declared total

vibration value and

the declared noise

emission value

may also be used

for a preliminary

assessment of

exposure.

m

WARNING!

u The vibration and

noise emissions

during actual use

of the power tool

can dier from the

declared values

depending on the

manner in which

the tool is used,

especially what

kind of workpiece

is processed.

u Try to minimise

exposure to

vibration and

noise. Examples

of measures to

reduce vibration

include wearing

gloves when

using the tool and

limiting working

time. All parts of

the operating cycle

must be taken into

account (e.g. times

when the power

tool is switched

o and when it

is running idle in

addition to the

trigger time).

Use only the following charger to charge the

cordless tool ** :

Information Value

Manufacturer’s name or

trade mark, commercial

registration number and

address:

OWIM GmbH & Co. KG

HRA 721742

Stiftsbergstraße 1,

74167 Neckarsulm,

GERMANY

Model identier: HG06825 (VDE plug)

HG06825‑BS (BS plug)

Information Value Unit

Input voltage: 100–240 V~

Input AC frequency: 50/60 Hz

Output voltage: 5.0 V

Ouput current: 1.7 A

Output power: 8.5 W

Average active

eciency: 78.2 %

No‑load power

consumption: <0.1 W

Input current: 0.3 A

Protection class:

II/

(double insulation)

Connection type: USB (Type A)

Charging time: approx. 60 min

Recommended ambient temperature

While charging: +4°C to +40 °C

During operation: 0°C to +40 °C

During storage: 0°C to +50 °C

** Charger is not included. Customers can obtain

this charger via www.optimex‑shop.com.

GB/IE/NI

GB/IE/NI

GB/IE/NI

GB/IE/NI

GB/IE/NIGB/IE/NI

GB/IE/NI

GB/IE/NI

GB/IE/NI

GB/IE/NIGB/IE/NI

GB/IE/NI

GB/IE/NI

GB/IE/NI

GB/IE/NIGB/IE/NI

GB/IE/NI

GB/IE/NI

GB/IE/NI

GB/IE/NI

Warnings and symbols used

The following warnings are used in the user ma‑

nual and on the packaging:

WARNING! This symbol in combination

with the signal word “Warning” marks a

medium‑risk hazard that if not prevented

could result in death or serious injury.

CAUTION! This symbol in combination

with the signal word “Caution” marks

a low‑risk hazard that if not prevented

could result in minor or moderate injury.

NOTE: This symbol in combination

with “Note” provides additional useful

information.

Danger – risk of electric shock!

Alternating current/voltage

Direct current/voltage

Symbol for a Protection Class II product

Use the product in dry indoor spaces

only.

This symbol means that the operating

instructions must be observed when

using the product.

4V CORDLESS

SCREWDRIVER

 Introduction

We congratulate you on

the purchase of your

new product. You have

chosen a high quality

product. The instructions

for use are part of the

product. They contain

important information

concerning safety, use

and disposal. Before

using the product, please

familiarise yourself with

all of the safety infor‑

mation and instructions

for use. Only use the

product as described

and for the specied

applications. If you pass

the product on to anyone

else, please ensure that

you also pass on all the

documentation with it.

 Intended use

 This product is de‑

signed for screwing

in and out screws.

 Always use the

correct accessory

tools (attachments

and bits) according

to the intended use!

Observe the technical

Lithium‑Ion battery

n

0

No‑load speed

max. 50°C

Protect the rechargeable battery from

heat and continuous intense sunlight.

Protect the rechargeable battery from

re.

Protect the rechargeable battery from

water and moisture.

min

–1

Revolutions per minute

CE mark indicates conformity with

relevant EU directives applicable for this

product.

Safety information

Instructions for use

 Scope of deliv-

ery

m

WARNING!

u The product and

the packaging are

not children’s toys!

Children must not

play with plastic

bags, sheets

and small parts!

There is a danger

of choking and

suocation!

1 4V Cordless screw‑

driver

1 USB cable

26 Bits

1 Bit holder

1 Carrying case

1 User manual

 Description of

parts

(Fig. A)

[1] Direction indicator

(tighten screws)/

battery status LED

(green colour)

[2] Battery status LED

(yellow colour)

[3] Direction indicator

(loosen screws)/bat‑

tery status LED (red

colour)

requirements of this

product (see “Tech‑

nical data“) when

purchasing and using

accessory tools!

 The LED work

light

[] on this prod‑

uct is intended to illu‑

minate the immediate

work area.

 Any other use or

modication of the

product are con‑

sidered improper

use and can result

in hazards such as

death, life‑threatening

injuries and damage.

 The manufacturer

is not liable for any

damages caused by

improper use.

 The product is not

intended for commer‑

cial or similar uses.

[4] Rotation direction

switch

[5] USB socket (TypeC)

[6] Charger *

[7] USB port (TypeA)

[8] USB cable

[9] Switch trigger

[] LED work light

[] Front cover

[] Bit holder

 Technical data

4V Cordless

screwdriver

Model: HG10759

Rated

voltage: 4 V

Re‑

chargeable

battery

(built‑in):

Lithium‑

lon

Number of

cells: 1

Capacity: 1.5 Ah

No‑load

speed n

0

: 200 min

–1

Torque: Max.

10Nm

Bit holder: 6.35 mm

(1/4")

* Charger is not

included. Customers

can obtain this

charger via

www.optimex‑

shop.com.

b) Do not use the pow-

er tool if the switch

does not turn it on

and o. Any power

tool that cannot be

controlled with the

switch is dangerous

and must be re‑

paired.

c) Disconnect the plug

from the power

source and/or the

battery pack, if de-

tachable, from the

power tool before

making any adjust-

ments, changing

accessories, or

storing power tools.

Such preventive safe‑

ty measures reduce

the risk of starting the

power tool acciden‑

tally.

d) Store idle power

tools out of the

reach of children

and do not allow

persons unfamiliar

with the power tool

or these instruc-

tions to operate the

power tool. Power

tools are dangerous

in the hands of un‑

trained users.

Noise emission value

The measured values

have been determined

in accordance with

EN 62841. The A‑rat‑

ed noise level of the

power tool is typically as

follows:

Sound

pressure

level L

pA

: 60.37 dB

Sound power

level L

WA

: 71.37 dB

Un certainty

K

pA/WA

: 3 dB

Vibration emission

value

Vibration total values

(triaxial vector sum)

determined according to

EN 62841:

Screw driving

Vibration

emission

value a

h

: < 2.5 m/s

2

Un‑

certainty K:

1.5 m/s

2

4V CORDLESS

SCREWDRIVER 

PAS4D7

4V CORDLESS

SCREWDRIVER

User manual

Translation of the original

instructions

4 V TOURNEVIS

ÉLECTRIQUE SANS

FIL

Mode d’emploi

Traduction de la notice

originale

4V ACCU‑

SCHROEVENDRAAI-

ER

Gebruiksaanwijzing

Vertaling van de

oorspronkelijke

gebruiksaanwijzing

4 V AKKU-

SCHRAUBER

Bedienungsanleitung

Originalbetriebsanleitung

IAN 504705_2501

A B E

D

C

F

[1]

[2]

[3]

[5]

[9]

[]

[]

[]

[6]

[5][7]

[4]

[9]

[]

[6]

[8]

[7]

[8]

[]

[4]

a

A1

A2

A3

A4

b

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Parkside IAN 504705 Skruvdragare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Parkside. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Parkside IAN 504705 Skruvdragare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Parkside Skruvdragare
Fler bruksanvisningar för Skruvdragare

Vanliga frågor om Parkside IAN 504705 Skruvdragare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Parkside PSSA 3.6 C3 Skruvdragare

Bruksanvisning

Parkside IAN 282486 Skruvdragare

Bruksanvisning

Parkside IAN 74287 Skruvdragare

Bruksanvisning

Parkside IAN 293831 Skruvdragare

Bruksanvisning

Parkside IAN 49365 Skruvdragare

Bruksanvisning

Parkside IAN 423419 Skruvdragare

Bruksanvisning

Parkside IAN 373553 Skruvdragare

Bruksanvisning

Parkside PAS 3.6 B1 Skruvdragare

Relaterade kategorier