Bruksanvisning Panasonic RF-D10EB Radio

Bruksanvisning

4

RQTN0173

4

Power sources

Using the household mains socket

Connect the AC mains lead firmly to the unit and the

household mains socket.

Note:

• Do not use an AC mains lead from other equipment.

• This unit consumes a small amount of power when it is in

standby mode. Disconnect the power supply if you do not

use the unit.

Using the batteries (not supplied)

Use alkaline or manganese batteries.

Install the batteries so that the poles (+ and –) align with

those in the unit.

This unit will use the batteries as the power source when

you disconnect the AC mains lead. The battery indicator

will light up.

The battery indicator shows the battery levels.

Note:

• The unit switches on after you insert the batteries.

• When the battery indicator “ ” begins flashing, replace all

4 of the batteries.

• After the battery indicator flashes for 10 seconds, the unit

will switch off automatically.

Getting started

1 Extend the antenna.

2 Press [1] to switch on the unit.

The first time you switch on the unit, it will enter DAB

mode and automatically scan for stations. It sets the time

and date (if data is available) and starts playing the first

station it finds.

Note:

In standby mode, the unit shows the time and date (only when

the unit is powered by AC).

DAB

DAB (Digital Audio Broadcasting) is a procedure of

broadcasting the radio digitally. It gives less interference

and better sound quality.

This unit supports DAB in “BAND III” bands.

DAB operation

The first time you enter DAB mode, or if the station list is

empty, the unit will start the full scan and memorise the

stations.

You can perform the full scan procedure when there is a

new station or a station becomes available.

1 Press [BAND] to select “DAB”.

2 Press [MENU] to select “Full scan” and then press

[ENTER] to start full scan.

To cancel, press [MENU].

█ Remove unavailable listed stations

This unit indicates those stations that are closed or no

longer available with a question mark in front of the

station name. You can remove these stations from the

station list.

1 Press [MENU] and then turn [ TUNE/SELECT ] to

select “Prune”.

2 Press [ENTER].

3 Turn [ TUNE/SELECT ] to select “Yes” and then

press [ENTER].

To cancel, select “No”.

1

2

3

4

R14/LR14, C

Press towards while

inserting the battery.

Number of stations found

rf-d10eg.book Page 4 Friday, January 3, 2014 4:54 PM

printing

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Panasonic RF-D10EB Radio. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Panasonic. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Panasonic RF-D10EB Radio på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Panasonic Radio
Fler bruksanvisningar för Radio

Vanliga frågor om Panasonic RF-D10EB Radio

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Panasonic RF-U160 Radio

Bruksanvisning

Panasonic RF-SW50P Radio

Bruksanvisning

Panasonic RF-D7 Radio

Bruksanvisning

Panasonic RF-2400DEG Radio

Bruksanvisning

Panasonic EY37A2 Portable Radio

Bruksanvisning

Panasonic RC-800 Radio

Bruksanvisning

Panasonic RF-D100BTEG Radio

Bruksanvisning

Panasonic RF-U350 Radio

Relaterade kategorier