Bruksanvisning Panasonic PV-DF2702 TV

Bruksanvisning

Important Safeguards and Precautions

2

INSTALLATION

1 POWER SOURCE CAUTION

Operate only from power source indicated on unit

or in this manual. If uncertain, have your Electric

Utility Service Company or Video Products Dealer

verify your home power source.

2 POWER CORD PLUG

For safety, this unit has a polarized type plug (one

wide blade), or a three-wire grounding type plug.

Always hold the plug firmly and make sure your

hands are dry when plugging in or unplugging the

AC power cord. Regularly remove dust, dirt, etc.

on the plug.

POLARIZED PLUG CAUTION:

The plug fits into outlet one way. If it cannot be fully

inserted, try reversing it. If it still will not fit, have an

electrician install the proper wall outlet. Do not

tamper with the plug.

GROUNDING PLUG CAUTION:

The plug requires a three-hole grounding outlet.

If necessary, have an electrician install the proper

outlet. Do not tamper with the plug.

3 POWER CORD

To avoid unit malfunction, and to protect against

electrical shock, fire or personal injury:

- Keep power cord away from heating appliances

and walking traffic. Do not rest heavy objects on,

or roll such objects over the power cord.

- Do not tamper with the cord in any way.

- An extension cord should have the same type

plug (polarized or grounding) and must be

securely connected.

- Overloaded wall outlets or extension cords is a

fire hazard.

- Frayed cords, damaged plugs, and damaged or

cracked wire insulation are hazardous and should

be replaced by a qualified electrician.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat

generated during operation. If blocked, heat

build-up may result in a fire hazard or heat

damage to cassettes or discs.

For your protection:

a. Never cover ventilation slots while unit is ON,

or operate unit while placed on a bed, sofa,

rug, or other soft surface.

b. Avoid built-in installation, such as a book case

or rack, unless properly ventilated.

5

AVOID EXTREMELY HOT LOCATIONS OR

SUDDEN TEMPERATURE CHANGES

Do not place unit over or near a heater or radiator,

in direct sunlight, inside closed vehicles,

75% humidity. If unit is suddenly moved from a

cold place to a warm one, moisture may

condense in unit and on the tape causing

damage. Never subject unit to vibration, impact,

or place it so that the surface is tilted as internal

parts may be seriously damaged.

6 TO AVOID PERSONAL INJURY

• Never place unit on support or stand that is not

firm, level, and adequately strong.

The unit could fall causing serious

injury to a child or adult and

damage to the unit.

• Move any appliance and cart

combination with care.

Quick stops, excessive force, and

uneven surfaces may cause objects to overturn.

• Carefully follow all operating instructions.

OUTDOOR ANTENNA INSTALLATION

1 SAFE ANTENNA AND CABLE CONNECTION

An outside antenna or cable system must be properly

grounded to provide some protection

against built up static charges

and voltage. Section 810

of the National Electrical

Code, ANSI/NFPA 70 (in

Canada, part 1 of the

Canadian Electrical Code)

provides information

regarding proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of

antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE

POWER LINES OR CIRCUITS

Locate an outside antenna system well away from power

lines and electric light or power circuits so it will never

touch these power sources should it ever fall. When

installing antenna, absolutely never touch power lines,

circuits or other power sources as this could be fatal.

USING THE UNIT

Before unit is brought out of storage or moved to a new location,

refer again to the INSTALLATION section of these safeguards.

1 KEEP UNIT WELL AWAY FROM WATER OR

MOISTURE, such as vases, sinks, tubs, etc.

2 IF EXPOSED TO RAIN, MOISTURE, OR

STRONG IMPACT, unplug unit and have it inspected

by a qualified service technician before use.

3 ELECTRICAL STORMS

During a lightning storm, or before leaving unit unused for

extended periods of time, disconnect all equipment from

the power source as well as the antenna and cable system.

4 WHEN UNIT IS PLUGGED IN

• DO NOT OPERATE IF:

- liquid has spilled into unit.

- unit was dropped or otherwise damaged.

- unit emits smoke, malodors, or noises.

Immediately unplug unit, and have it inspected by a

service technician to avoid potential fire and shock hazards.

•

Never drop or push any object through openings in unit.

Touching internal parts may cause electric shock or fire hazard.

Do not put any foreign object on the tray.

• Keep magnetic objects, such as speakers, away from

unit to avoid electrical interference.

5 USING ACCESSORIES

Use only accessories recommended by the manufacturer

to avoid risk of fire, shock, or other hazards.

6 CLEANING UNIT

Unplug unit. Use a clean, dry, chemically untreated cloth to

gently remove dust or debris. DO NOT USE cleaning fluids,

aerosols, or forced air that could over-spray, or seep into unit and

cause electrical shock. Any substance, such as wax, adhesive

tape, etc. may mar the cabinet surface. Exposure to greasy,

humid, or dusty areas may adversely affect internal parts.

READ AND RETAIN ALL SAFETY AND

OPERATING INSTRUCTIONS. HEED ALL

WARNINGS IN THE MANUAL AND ON UNIT

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC

- NATIONAL ELECTRICAL CODE

SERVICE

1 DO NOT SERVICE PRODUCT YOURSELF

If, after carefully following detailed operating instructions, the

unit does not operate properly, do not attempt to open or

remove covers, or make any adjustments not described in the

manual. Unplug unit and contact a qualified service technician.

2 REPLACEMENT OF PARTS

Make sure the service technician uses only parts specified

by the manufacturer, or have equal safety characteristics

as original parts. The use of unauthorized substitutes may

result in fire, electric shock, or other hazards.

3 SAFETY CHECK AFTER SERVICING

After unit is serviced or repaired, request that a thorough safety

check be done as described in the manufacturer’s service

literature to insure video unit is in safe operating condition.

in high temperature [over ° ° ], or in over

95°F (35°C)

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Panasonic PV-DF2702 TV. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Panasonic. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Panasonic PV-DF2702 TV på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Panasonic TV
Fler bruksanvisningar för TV

Vanliga frågor om Panasonic PV-DF2702 TV

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Panasonic TX-36PF10 TV

Bruksanvisning

Panasonic TX-32K50DB TV

Bruksanvisning

Panasonic TX-32PL1 TV

Bruksanvisning

Panasonic TX-2172 TV

Bruksanvisning

Panasonic CT-F2124L TV

Bruksanvisning

Panasonic CT-24SL14 TV

Bruksanvisning

Panasonic TX-29AL10F TV

Bruksanvisning

Panasonic TX-28X1 TV

Relaterade kategorier