Bruksanvisning Panasonic ES-6002E8 Rakapparat

Bruksanvisning

Hold the shaver at a right angle (90°)

to your skin (see fig. 3). Start out

shaving by applying gentle pressure

to your face. Stretch your skin with

your free hand and move the shaver

back and forth in the direction of your

beard. You may gently increase the

amount of pressure as your skin be-

comes accustomed to this shaver.

Applying excessive pressure does

not provide a closer shave.

System outer foil

(see fig. 4)

System outer foil has a slit blade (a)

between 2 foils (b). They move up

and down independently to follow the

contours of your face.

The slit blade catches and cuts

longer and lying hairs easily.

For wet shaving

Put a thin layer of shaving foam

on your face which works as a lu-

bricator. Shaving foam is the most

suitable among many other shav-

ing aids (gel, soap, cream, etc.).

Do not put a thick layer of shaving

foam as it may affect shaver’s per-

formance. If the shaving head is

clogged with foam, simply rinse

it under running water.

Using the trimmer

(see fig. 5)

Slide the trimmer handle up to open

the trimmer.

Place the trimmer at a right angle to

your skin and move it downward to

trim sideburns.

Cleaning your shaver

(see fig. 6)

Warning – To prevent electric

shock or personal injury, discon-

nect the power cord from the

shaver before cleaning with water.

For cleanliness and convenience, we

recommend that you clean your

shaver with water and a liquid hand

soap. Regular cleaning will keep your

shaver in good condition while pre-

venting odors or bacteria from devel-

oping, and maintain the cutting per-

formance.

With the system outer foil in place,

apply some hand soap onto the outer

foil.

Turn the shaver on and pour some

water over the outer foil.

After about 10-20 seconds, turn the

shaver off.

Remove the foil frame and clean

it with running water.

Wipe off any moisture from the

shaver with a dry cloth and remove

the protective cap to allow the sys-

tem outer foil to dry completely.

Brush cleaning

Squeeze the foil frame release but-

tons and lift the foil frame upward to

remove it (see fig. 8). Remove the in-

ner blades one at a time by grasping

it firmly at both ends and pulling it

straight away from the shaver. Clean

the outer foils, the shaver body and

the trimmer with the long brush (see

fig. 9). Clean the inner blades with

the short brush by moving it in the

direction in fig. 10 (A). Do not move

the brush in the direction in fig. 10

(B), as it will damage the inner blade,

and its cutting performance. Do not

use the short brush to clean the outer

foils.

Replacing shaving head

components

It is recommended that you replace

the system outer foil at least once a

year and the inner blade at least once

every 2 years to maintain your

shaver’s cutting performance.

Replacing the system outer foil

(see fig. 7)

Squeeze the system outer foil re-

lease buttons and lift the system

outer foil upward to remove it. To in-

sert the new system outer foil, press

down until it snaps into place.

Replacing the inner blades

(see fig. 8)

Squeeze the foil frame release

buttons and lift the foil frame

upward to remove it. Remove the

inner blade one at a time by

grasping it firmly at both ends

and pulling straight away from

the shaver.

Do not touch the metal parts of inner

blades.

To insert the new inner blade, hold

the blade one at a time at both ends

and press downward until it snaps

into the shaver.

For environmental protec-

tion and recycling of

materials

This shaver contains Nickel-Metal

Hydride batteries.

Please make sure that the batteries

are disposed of at an officially as-

signed location, if there is one in your

country.

How to remove the built-in

rechargeable battery before

disposal of the shaver

(see fig. 11)

WARNING:

Do not attempt to replace the bat-

tery for the purpose of reusing the

shaver. This could result in the risk

of fire or electric shock.

The battery in this shaver is not

intended to be replaced by con-

sumers. However, the battery

may be replaced at an authorized

service center. The procedure

described below is intended only

for removal of the rechargeable

battery for the purpose of proper

disposal.

1. Disconnect the power cord from

the shaver when removing the

battery.

2. Remove the bottom cover screw

(a).

3. Remove the bottom cover (b).

4. Slide the side panels (c) and re-

move it.

5. Remove the six housing screws

(d).

6. Remove the trimmer handle (e).

7. Remove the two screws (f).

76

P06-99̲ES6003/6002̲EU  06.03.09 14:18  ページ6

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Panasonic ES-6002E8 Rakapparat. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Panasonic. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Panasonic ES-6002E8 Rakapparat på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Panasonic Rakapparater
Fler bruksanvisningar för Rakapparater

Vanliga frågor om Panasonic ES-6002E8 Rakapparat

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Panasonic ES-RW30 Rakapparat

Bruksanvisning

Panasonic ES-7058 Rakapparat

Bruksanvisning

Panasonic ES-SA40 Rakapparat

Bruksanvisning

Panasonic ES-LV67 Rakapparat

Bruksanvisning

Panasonic ES-8078 Rakapparat

Bruksanvisning

Panasonic ES-6003 Rakapparat

Bruksanvisning

Panasonic ES-8103 Rakapparat

Bruksanvisning

Panasonic ES-RF31 Rakapparat

Relaterade kategorier