Bruksanvisning Makita JR3000 Tigersåg

Bruksanvisning

ENGLISH

Explanation of general view

1 Hex wrench

2 Bolt

3 Shoe

4 Bolt

5 Speed change switch

6 Switch trigger

7 Lock button/Lock-off button

8 Speed control screw

9 High

0 Low

q Limit mark

w Brush holder cap

e Screwdriver

SPECIFICATIONS

Model JR3000 JR3000V

Length of stroke .......................................................................... 30 mm 30 mm

Strokes per minute ...................................................................... Hi : 2,500 Low : 1,900 0 – 2,300

Overall length .............................................................................. 400 mm 400 mm

Net weight ................................................................................... 2.9 kg 2.9 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed Safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

2. Do not cut oversize workpiece.

3. Check for the proper clearance beyond the

workpiece before cutting so that the blade will

not strike the floor, workbench, etc.

4. Hold the machine firmly.

5. Make sure the blade is not contacting the

workpiece before the switch is turned on.

6. Keep hands away from moving parts.

7. When cutting through walls, floors or wher-

ever ‘‘live’’ electrical wires may be encoun-

tered, DO NOT TOUCH ANY METAL PARTS OF

THE MACHINE! Hold the machine by the insu-

lated grasping surfaces to prevent electric

shock if you cut through a ‘‘live’’ wire.

8. Do not leave the machine running. Operate the

machine only when hand-held.

9. Always switch off and wait for the blade to

come to a complete stop before removing the

blade from the workpiece.

10. Do not touch the blade or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing saw blade (Fig. 1)

Important:

Always be sure that the machine is switched off and

unplugged before installing or removing the blade.

First, use the hex wrench to loosen the bolt. With the

blade teeth facing upward or downward, insert the

blade until the hole in the blade shank is just over the

protrusion on the slider. Then tighten the bolt to

secure the blade.

Adjusting shoe (Fig. 2)

Loosen the two bolts holding the shoe. Then slide the

shoe back or forth to the desired position and tighten

the two bolts securely. When the blade loses its

cutting effectiveness in one place, reposition the shoe

to obtain better cutting in another.

Speed change (For JR3000 only) (Fig. 3)

CAUTION:

Use the speed change switch only after the machine

comes to a complete stop.

To change the machine speed, move the speed

change switch to the ‘‘L’’ position for low speed or the

‘‘H’’ position for high speed.

High speed: ordinary wood, plys or plastics

Low speed: metals (steel pipe, sheet metal, stainless

or copper)

Switch action (For JR3000) (Fig. 4)

CAUTION:

Before plugging the machine, always check to see

that the switch trigger actuates properly and returns to

the ‘‘OFF’’ position when released.

JR3000 (Eng) (’96. 3. 22)

3

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita JR3000 Tigersåg. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita JR3000 Tigersåg på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Tigersågar
Fler bruksanvisningar för Tigersågar

Vanliga frågor om Makita JR3000 Tigersåg

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita JR3030T Tigersåg

Bruksanvisning

Makita JR140D Tigersåg

Bruksanvisning

Makita JR3000V Tigersåg

Bruksanvisning

Makita BJR141 Tigersåg

Bruksanvisning

Makita JR3020 Tigersåg

Bruksanvisning

Makita JR3030 Tigersåg

Bruksanvisning

Makita JR180D Tigersåg

Bruksanvisning

Makita BJR240 Tigersåg

Relaterade kategorier