Bruksanvisning Makita HR2010 Borrhammare

Bruksanvisning

4

ENGLISH (Original instructions)

Explanation of general view

1 Switch trigger

2 Side grip

3 Bit shank

4 Bit grease

5Bit

6 Chuck cover

7 Depth gauge

8 Clamp screw

9 Grip base

10 Drill chuck

11 Chuck adapter

12 Commutator

13 Insulating tip

14 Carbon brush

15 Screwdriver

16 Brush holder cap

17 Lock nut wrench

18 Crank cap

19 Hammer grease

SPECIFICATIONS

Model HR2010

Capacities

Concrete............................................................. 20 mm

Steel ................................................................... 13 mm

Wood .................................................................. 24 mm

No load speed (min

–1

).......................................... 0 – 900

Blows per minute............................................... 0 – 4,000

Overall length ...................................................... 302 mm

Net weight ............................................................. 3.4 kg

Safety class............................................................. /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE041-1

Intended use

The tool is intended for hammer drilling in brick, concrete

and stone.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB007-7

ROTARY HAMMER SAFETY WARNINGS

1. Wear ear protectors. Exposure to noise can cause

hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tools by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly

recommended that you wear a dust mask and

thickly padded gloves.

5. Be sure the bit is secured in place before opera-

tion.

6. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for a

while by operating it under no load. This will

loosen up the lubrication. Without proper warm-

up, hammering operation is difficult.

8. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

9. Hold the tool firmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area when

operating. The bit could fly out and injure some-

one seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

14. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita HR2010 Borrhammare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita HR2010 Borrhammare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Borrhammare
Fler bruksanvisningar för Borrhammare

Vanliga frågor om Makita HR2010 Borrhammare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita BHR202 Borrhammare

Bruksanvisning

Makita HR2653T Borrhammare

Bruksanvisning

Makita HR4040C Borrhammare

Bruksanvisning

Makita HR3850 Borrhammare

Bruksanvisning

Makita HR4030C Borrhammare

Bruksanvisning

Makita HR166D Borrhammare

Bruksanvisning

Makita HR4511C Borrhammare

Bruksanvisning

Makita HR2431 Borrhammare

Relaterade kategorier