Bruksanvisning Makita HP2040 Slagborrmaskin

Bruksanvisning

5

ENGLISH

Explanation of general view

1 Teeth

2 Protrusions

3Loosen

4Tighten

5 Side grip

6 Chuck key

7Sleeve

8 Ring

9 Depth gauge

10 Switch trigger

11 Lock button

12 Reversing switch lever

13 Speed change knob

14 Action mode change button

15 Blow-out bulb

16 Vent holes

SPECIFICATIONS

Model HP2040 HP2041 HP2042

Max. capacities

Concrete ..........................................High: 20 mm 20 mm 20 mm

Low: — — —

Steel ................................................High: 8 mm 8 mm 8 mm

Low: 13 mm 13 mm 13 mm

Wood ...............................................High: 25 mm 25 mm 25 mm

Low: 40 mm 40 mm 40 mm

No load speed (min

-1

) .........................High: 0 – 2,900 0–2,900 2,900

Low: 0 – 950 0–950 950

Blows per minute ................................High: 0 – 37,700 0–37,700 37,700

Low: 0 – 12,400 0–12,400 12,400

Overall length ................................................. 364 mm 364 mm 364 mm

Net weight....................................................... 2.3 kg 2.3 kg 2.3 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

SPECIFIC SAFETY RULES

GEB003-2

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to hammer drill safety rules. If you use this power

tool unsafely or incorrectly, you can suffer serious

personal injury.

1. Wear ear protectors with impact drills. Exposure

to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

4. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

5. Hold the tool firmly with both hands.

6. Keep hands away from rotating parts.

7. Do not leave the tool running. Operate the tool

only when hand-held.

8. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

9. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

OPERATING INSTRUCTIONS

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the side grip, bit

or other accessories.

Side grip (auxiliary handle) (Fig. 1)

Always use the side grip to ensure operating safety.

Install the side grip so that the teeth on the grip fit in

between the protrusions on the tool barrel. Then tighten

the grip by turning clockwise at the desired position. It

may be swung 360° so as to be secured at any position.

Installing or removing drill bit

For HP2040 and HP2042 (Fig. 2)

To install the bit, place it in the chuck as far as it will go.

Tighten the chuck by hand. Place the chuck key in each

of the three holes and tighten clockwise. Be sure to

tighten all three chuck holes evenly.

To remove the bit, turn the chuck key counterclockwise in

just one hole, then loosen the chuck by hand.

After using the chuck key, be sure to return it to the origi-

nal position.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita HP2040 Slagborrmaskin. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita HP2040 Slagborrmaskin på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Slagborrmaskiner
Fler bruksanvisningar för Slagborrmaskiner

Vanliga frågor om Makita HP2040 Slagborrmaskin

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita HP2020 Slagborrmaskin

Bruksanvisning

Makita 8413D Slagborrmaskin

Bruksanvisning

Makita HP2041 Slagborrmaskin

Bruksanvisning

Makita 8434D Slagborrmaskin

Bruksanvisning

Makita 8414D Slagborrmaskin

Bruksanvisning

Makita 8433D Slagborrmaskin

Bruksanvisning

Makita HP2051 Slagborrmaskin

Bruksanvisning

Makita 8443D Slagborrmaskin

Relaterade kategorier