Bruksanvisning Makita GA6010 Vinkelslip

Bruksanvisning

2

ENGLISH

SPECIFICATIONS

Model

GA5010, GA5010Y, GA5010Z

GA5011 GA6010,GA6010Z GA6011

Wheel diameter 125 mm (5") 150 mm (6")

Spindle thread 5/8"

No load speed (RPM) 11,000/min 10,000/min

Overall length 356 mm (14") 384 mm (15-1/8") 356 mm (14") 384 mm (15-1/8")

Net weight 2.2 kg (4.9 lbs)

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

USA002-2

GENERAL SAFETY RULES

(For All Tools)

WARNING! Read and understand all instructions.

Failure to follow all instructions listed below, may result

in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS.

Work Area

1. Keep your work area clean and well lit.

Cluttered benches and dark areas invite

accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away

while operating a power tool. Distractions can

cause you to lose control.

Electrical Safety

4. Double insulated tools are equipped with a

polarized plug ( one blade is wider than the

other.) This plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit,

contact a qualified electrician to install a

polarized outlet. Do not change the plug in any

way. Double insulation

eliminates the need for

the three wire grounded power cord and grounded

power supply system.

5. Avoid body contact with grounded surfaces

such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord to

carry the tools or pull the plug from an outlet.

Keep cord away from heat, oil, sharp edges or

moving parts. Replace damaged cords

immediately. Damaged cords increase the risk of

electric shock.

8. When operating a power tool outside, use an

outdoor extension cord marked "W-A" or "W".

These cords are rated for outdoor use and reduce

the risk of electric shock.

Personal Safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

10. Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair,

clothing, and gloves away from moving parts.

Loose clothes, jewelry, or long hair can be caught

in moving parts.

11. Avoid accidental starting. Be sure switch is off

before plugging in. Carrying tools with your

finger on the switch or plugging in tools that have

the switch on invites accidents.

12. Remove adjusting keys or wrenches before

turning the tool on. A wrench or a key that is left

attached to a rotating part of the tool may result in

personal injury.

13. Do not overreach. Keep proper footing and

balance at all times. Proper footing and balance

enables better control of the tool in unexpected

situations.

14. Use safety equipment. Always wear eye

protection. Dust mask, non-skid safety shoes,

hard hat, or hearing protection must be used for

appropriate conditions. Ordinary eye or sun

glasses are NOT eye protection.

Tool Use and Care

15. Use clamps or other practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your body is

unstable and may lead to loss of control.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita GA6010 Vinkelslip. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita GA6010 Vinkelslip på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Vinkelslipar
Fler bruksanvisningar för Vinkelslipar

Vanliga frågor om Makita GA6010 Vinkelslip

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita 9565HR Vinkelslip

Bruksanvisning

Makita GA9030S Vinkelslip

Bruksanvisning

Makita GA9061R Vinkelslip

Bruksanvisning

Makita GA4030R Vinkelslip

Bruksanvisning

Makita GA5030R Vinkelslip

Bruksanvisning

Makita M9000 Vinkelslip

Bruksanvisning

Makita DGA450 Vinkelslip

Bruksanvisning

Makita 9560Z Vinkelslip

Relaterade kategorier