Bruksanvisning Makita AF506 Spikpistol

Bruksanvisning

6 ENGLISH

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

Pneumatic nailer/stapler safety

warnings

WARNING: Read all safety warnings and

all instructions.Failuretofollowthewarningsand

instructionsmayresultinseriousinjury,electricshock

and/orre.

Save all warnings and instruc-

tions for future reference.

Forpersonalsafetyandproperoperationandmaintenanceof

thetool,readthisinstructionmanualbeforeusingthetool.

General safety

1.

Any other use except for intended use of this tool

is forbidden. Fastener driving tools with continual

contact actuation or contact actuation shall only be

used for production applications.

2. Keep ngers away from trigger when not

operating this tool and when moving from one

operating position to another.

3.

Multiple hazards. Read and understand the safety

instructions before connecting, disconnecting,

loading, operating, maintaining, changing acces-

sories on, or working near the tool. Failure to do so

can result in serious bodily injury.

4.

Keep all body parts such as hands and legs etc.

away from ring direction and ensure fastener

cannot penetrate workpiece into parts of the body.

5. When using the tool, be aware that the fastener

could deect and cause injury.

6. Hold the tool with a rm grasp and be prepared

to manage recoil.

7. Only technically skilled operators should use

the fastener driving tool.

8. Do not modify the fastener driving tool.

Modications may reduce the effectiveness of

safety measures and increase the risks to the

operator and/or bystander.

9. Do not discard the instruction manual.

10. Do not use a tool if the tool has been damaged.

11. Be careful when handling fasteners, especially

when loading and unloading, as the fasteners

have sharp points which could cause injury.

12. Always check the tool before use for broken,

misconnected or worn parts.

13.

Do not overreach. Only use in a safe working place.

Keep proper footing and balance at all times.

14. Keep bystanders away (when working in an

area where there is a likelihood of through traf-

c of people). Clearly mark off your operating

area.

15. Never point the tool at yourself or others.

16. Do not rest your nger on the trigger when

picking up the tool, moving between operating

areas and positions or walking, as resting

nger on trigger can lead to inadvertent opera-

tion. For tools with selective actuation, always

check the tool before use to ascertain the

correct mode is selected.

17. Only wear gloves that provide adequate feel

and safe control of triggers and any adjusting

devices.

18. When resting the tool, lay it down on the at

surface. If you use the hook equipped with

the tool, hook the tool securely on the stable

surface.

19. Do not operate when under the inuence of

alcohol, drugs or the like.

Projectile hazards

1. The fastener driving tool shall be disconnected

when unloading fasteners, making adjust-

ments, clearing jams or changing accessories.

2.

During operation be careful that fasteners penetrate

material correctly and cannot be deected/misred

towards operator and/or any bystanders.

3. During operation, debris from workpiece and

fastening/collation system may be discharged.

4. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

It is an employer's responsibility to enforce

the use of appropriate safety protective equip-

ments by the tool operators and by other per-

sons in the immediate working area.

5. The risks to others shall be assessed by the

operator.

6. Be careful with tools without workpiece con-

tact as they can be red unintentionally and

injure operator and/or bystander.

7. Ensure tool is always safely engaged on the

workpiece and cannot slip.

8. Wear hearing protection to protect your ears

against exhaust noise and head protection.

Also wear light but not loose clothing. Sleeves

should be buttoned or rolled up. No necktie

should be worn.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita AF506 Spikpistol. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita AF506 Spikpistol på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Spikpistoler
Fler bruksanvisningar för Spikpistoler

Vanliga frågor om Makita AF506 Spikpistol

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita AF353 Spikpistol

Bruksanvisning

Makita DBN901 Spikpistol

Bruksanvisning

Makita DBN501 Spikpistol

Bruksanvisning

Makita BN001G Spikpistol

Bruksanvisning

Makita DBN900 Spikpistol

Bruksanvisning

Makita DBN601 Spikpistol

Bruksanvisning

Makita DBN610 Spikpistol

Bruksanvisning

Makita DBN600 Spikpistol

Relaterade kategorier