Bruksanvisning Makita 9911 Bandslipar

Bruksanvisning

4

ENGLISH

Explanation of general view

1Lever

2 Steel plate

3 Adjusting screw

4 Dust bag

5 Dust spout

6 Lock button

7 Switch trigger

8 Speed adjusting dial

9 Clamps

10 Limit mark

11 Belt cover

12 Screwdriver

13 Brush holder cap

SPECIFICATIONS

Model 9910 9911

Belt size .......................................................................................76mm x457mm 76mm x457mm

Belt speed ....................................................................................270m/min. 75m –270m/min.

Overall length ..............................................................................262 mm 262mm

Net weight ....................................................................................2.6kg 2.6kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

SPECIFIC SAFETY RULES

GEB015-1

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to belt sander safety rules. If you use this tool

unsafely or incorrectly, you can suffer serious per-

sonal injury.

1. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

2. Ventilate your work area adequately when you

perform sanding operations.

3. Some material contains chemicals which may be

toxic. Take caution to prevent working dust inha-

lation and skin contact. Follow material supplier

safety data.

4. Always use the correct dust mask/respirator for

the material and application you are working

with.

5. Always use safety glasses or goggles. Ordinary

eye or sun glasses are NOT safety glasses.

6. Hold the tool firmly with both hands.

7. Make sure the belt is not contacting the work8

piece before the switch is turned on.

8. Keep hands away from rotating parts.

9. Do not leave the tool running. Operate the tool

only when hand-held.

10. This tool has not been waterproofed, so do not

use water on the workpiece surface.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

OPERATING INSTRUCTIONS

Installing or removing abrasive belt (Fig.1)

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the belt.

Pull the lever all the way out and install the belt over the

rollers, then return the lever to the original position.

CAUTION:

When installing the belt, make sure that the direction of

the arrow on the back of the belt corresponds to the one

on the tool itself. (Fig.2)

Adjusting belt tracking (Fig.3)

Switch on the tool and make sure that the belt is aligned

properly. If the edge of the belt extends beyond the edge

of the steel plate or the edge of the belt retracts more

than 8mm away from the edge of the steel plate, use the

adjusting screw to adjust the belt tracking.

Dust bag (Fig.4)

Attach the dust bag onto the dust spout. The dust spout

is tapered. When attaching the dust bag, push it onto the

dust spout firmly as far as it will go to prevent it from com-

ing off during operation. For the best results, empty the

dust bag when it becomes about half full, tapping it lightly

to remove as much dust as possible.

Switch action (Fig.5)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

• The tool should not be in contact with the workpiece

surface when you turn the tool on or off. Otherwise a

poor sanding finish or damage of the belt may result.

To start the tool, simply pull the trigger. Release the trig-

ger to stop. For continuous operation, pull the trigger and

then push in the lock button. To stop the tool from the

locked position, pull the trigger fully, then release it.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita 9911 Bandslipar. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita 9911 Bandslipar på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Bandslipar
Fler bruksanvisningar för Bandslipar

Vanliga frågor om Makita 9911 Bandslipar

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita 9924DB Bandslipar

Bruksanvisning

Makita 9401 Bandslipar

Bruksanvisning

Makita 9402 Bandslipar

Bruksanvisning

Makita 9901 Bandslipar

Bruksanvisning

Makita 9910 Bandslipar

Bruksanvisning

Makita 9921 Bandslipar

Bruksanvisning

Makita 9900B Bandslipar

Bruksanvisning

Skil 1210 AA Bandslipar

Relaterade kategorier