Bruksanvisning Makita 6942D Mutterdragare

Bruksanvisning

ENGLISH

Explanation of general view

1 Battery cartridge

2 Set plate

3 Charging light

4 Battery charger

5 Hex bolt

6 Angle head

7 Groove

8 Tooth

9 Reversing switch

10 Switch lever

11 Position R

(Counterclockwise rotation)

12 Position F

(Clockwise rotation)

13 Release button

14 Socket

15 Anvil

16 Straight head

17 Ratchet head

SPECIFICATIONS

Model 6942D

Capacities

Standard bolt ...................................... M4 – M10

High tensile bolt .................................... M4 – M8

Square drive ............................................. 9.5 mm

No load speed (min

-1

) ............................. 0 – 2,000

Impacts per minute ................................... 0 – 2,700

Fastening torque .......................................... 32 N

.

m

Overall length ............................................. 370 mm

Net weight ...................................................... 1.5 kg

Rated voltage ........................................... D.C. 9.6 V

•

Due to our continuing program of research and

development, the specifications herein are subject

to change without notice.

•

Note: Specifications may differ from country to

country.

Safety hints

For your own safety, please refer to the enclosed

safety instructions.

IMPORTANT SAFETY INSTRUCTIONS

FOR CHARGER & BATTERY

CARTRIDGE

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating

instructions for battery charger.

2. Before using battery charger, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

3. CAUTION — To reduce risk of injury, charge

only MAKITA type rechargeable batteries.

Other types of batteries may burst causing

personal injury and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or

sold by the battery charger manufacturer may

result in a risk of fire, electric shock, or injury

to persons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when dis-

connecting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise sub-

jected to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a

sharp blow, been dropped, or otherwise dam-

aged in any way; take it to a qualified service-

man.

10. Do not disassemble charger or battery car-

tridge; take it to a qualified serviceman when

service or repair is required. Incorrect reas-

sembly may result in a risk of electric shock or

fire.

11. To reduce risk of electric shock, unplug

charger from outlet before attempting any

maintenance or cleaning. Turning off controls

will not reduce this risk.

ADDITIONAL SAFETY RULES FOR

CHARGER & BATTERY CARTRIDGE

1. Do not charge battery cartridge when tempera-

ture is BELOW 10°C (50°F) or ABOVE 40°C

(104°F).

2. Do not attempt to use a step-up transformer,

an engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Always cover the battery terminals with the

battery cover when the battery cartridge is not

used.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

6. Do not store the machine and battery cartridge

in locations where the temperature may reach

or exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

8. Be careful not to drop, shake or strike battery.

9. Do not charge inside a box or container of any

kind. The battery must be placed in a well

ventilated area during charging.

3

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita 6942D Mutterdragare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita 6942D Mutterdragare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Mutterdragare
Fler bruksanvisningar för Mutterdragare

Vanliga frågor om Makita 6942D Mutterdragare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita TW1000 Mutterdragare

Bruksanvisning

Makita 6911HDB Mutterdragare

Bruksanvisning

Makita 6953 Mutterdragare

Bruksanvisning

Makita 6911HDWB Mutterdragare

Bruksanvisning

Makita 6991D Mutterdragare

Bruksanvisning

Makita 6908D Mutterdragare

Bruksanvisning

Makita 6915D Mutterdragare

Bruksanvisning

Makita 6904VH Mutterdragare

Relaterade kategorier