Bruksanvisning Makita 6822 Skruvdragare

Bruksanvisning

3

ENGLISH (Original instructions)

Explanation of general view

1 Locking sleeve

2 Approximately 1 mm

3 Locator

4Low

5 High

6 Speed control screw

7 Switch trigger

8 Lock button

9 Reversing switch lever

10 Bit

11 Magnetic bit holder

SPECIFICATIONS

Model 6822

Capacities

Self drilling screw ................................................. 6 mm

Drywall screw ......................................................5 mm

Bit shank size .....................................................1/4" Hex

No load speed (min

–1

) ...................................... 0 – 4,000

Overall length .................................................... 258 mm

Net weight .............................................................. 1.4 kg

Safety class ............................................................... /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE033-1

Intended use

The tool is intended for screw driving in wood, metal and

plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB017-4

SCREWDRIVER SAFETY WARNINGS

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the fas-

tener may contact hidden wiring or its own cord.

Fasteners contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

2. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Depth adjustment

The depth can be adjusted by turning the locking sleeve.

Turn it in “A” direction for less depth and in “B” direction

for more depth. One full turn of the locking sleeve equals

1.5 mm change in depth. (Fig. 1)

Adjust the locking sleeve so that the distance between

the tip of the locator and the screw head is approximately

1 mm as shown in Fig. 2 or 3. Drive a trial screw into your

material or a piece of duplicate material. If the depth is

still not suitable for the screw, continue adjusting until you

obtain the proper depth setting. (Fig. 2 & 3)

Switch action (Fig. 4)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

A speed control screw is provided so that maximum tool

speed can be limited (variable). Turn the speed control

screw clockwise for higher speed, and counterclockwise

for lower speed.

NOTE:

• Even with the switch on and motor running, the bit will

not rotate until you fit the point of the bit in the screw

head and apply forward pressure to engage the clutch.

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita 6822 Skruvdragare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita 6822 Skruvdragare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Skruvdragare
Fler bruksanvisningar för Skruvdragare

Vanliga frågor om Makita 6822 Skruvdragare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita 6835D Skruvdragare

Bruksanvisning

Makita 6821 Skruvdragare

Bruksanvisning

Makita 6791D Skruvdragare

Bruksanvisning

Makita 6705DW Skruvdragare

Bruksanvisning

Makita 6805BV Skruvdragare

Bruksanvisning

Makita BFT080F Skruvdragare

Bruksanvisning

Makita 6792D Skruvdragare

Bruksanvisning

Makita BFT021F Skruvdragare

Relaterade kategorier