Bruksanvisning Makita 6408 Borrskruvdragare

Bruksanvisning

ENGLISH

Explanation of general view

1 Chuck

2 Chuck key

3 Tighten

4 Sleeve

5 Ring

6 Switch trigger

7 Lock button

8 Reversing switch lever

SPECIFICATIONS

Model 6407/6408

Drilling capacities

Steel ............................................................ 10 mm

Wood ........................................................... 25 mm

No load speed (RPM) ................................ 0 – 2,500

Overall length ............................................... 261 mm

Net weight ....................................................... 1.4 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to the enclosed

safety instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Always be sure you have a firm footing.

Be sure no one is below when using the

machine in high locations.

2. Hold the machine firmly.

3. Keep hands away from rotating parts.

4. When drilling into walls, floors or wherever

‘‘live’’electrical wires may be encountered, DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE!

Hold the machine by the insulated grasping

surfaces to prevent electric shock if you drill

into a ‘‘live’’ wire.

5. Do not leave the machine running. Operate the

machine only when hand-held.

6. Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing or removing drill bit

Important:

Always be sure that the machine is switched off and

unplugged before installing or removing the bit.

For 6407 (Fig. 1)

To install the bit, place it in the chuck as far as it will

go. Tighten the chuck by hand. Place the chuck key in

each of the three holes and tighten clockwise. Be sure

to tighten all three chuck holes evenly.

To remove the bit, turn the chuck key counterclock-

wise in just one hole, then loosen the chuck by hand.

After using the chuck key, remember to return it to the

chuck key holder.

For 6408 (Fig. 2)

Hold the ring and turn the sleeve counterclockwise to

open the chuck jaws. Place the bit in the chuck as far

as it will go. Hold the ring firmly and turn the sleeve

clockwise to tighten the chuck.

To remove the bit, hold the ring and turn the sleeve

counterclockwise.

Switch action (Fig. 3)

CAUTION:

Before plugging in the machine, always check to see

that the switch trigger actuates properly and returns to

the ‘‘OFF’’ position when released.

To start the machine, simply pull the trigger. Machine

speed is increased by increasing pressure on the

trigger. Release the trigger to stop. For continuous

operation, pull the trigger and then push in the lock

button. To stop the machine from the locked position,

pull the trigger fully, then release it.

Reversing switch action (Fig. 4)

CAUTION:

•

Always check the direction of rotation before drilling.

•

Use the reversing switch lever only after the

machine comes to a complete stop. Changing the

direction of rotation before the machine stops may

damage the machine.

This machine has a reversing switch to change the

direction of rotation. Move the reversing switch lever

to the

position for clockwise rotation or the posi-

tion for counterclockwise rotation.

6407/6408 (E)(’97. 5. 21)

3

Betyg

Mer om denna bruksanvisning

Vi förstår att det är trevligt att ha en pappersbruksanvisning för din Makita 6408 Borrskruvdragare. Du kan alltid ladda ner bruksanvisningen från vår hemsida och skriva ut den själv. Om du vill ha en originalbruksanvisning rekommenderar vi att du kontaktar Makita. De kanske kan tillhandahålla en originalbruksanvisning. Letar du efter bruksanvisningen för din Makita 6408 Borrskruvdragare på ett annat språk? Välj ditt föredragna språk på vår hemsida och sök efter modellnumret för att se om vi har det tillgängligt.

Specifikationer

Alla bruksanvisningar för Makita Borrskruvdragare
Fler bruksanvisningar för Borrskruvdragare

Vanliga frågor om Makita 6408 Borrskruvdragare

Vårt supportteam söker efter användbar produktinformation och svar på vanliga frågor. Om du hittar en felaktighet bland våra vanliga frågor uppskattar vi om du meddelar oss detta via vårt kontaktformulär.

Relaterade produkter

Bruksanvisning

Makita DA391DWB Borrskruvdragare

Bruksanvisning

Makita DA391DW Borrskruvdragare

Bruksanvisning

Makita 6328D Borrskruvdragare

Bruksanvisning

Makita DA391DB Borrskruvdragare

Bruksanvisning

Makita 6409 Borrskruvdragare

Bruksanvisning

Makita 6333D Borrskruvdragare

Bruksanvisning

Makita 6300-4 Borrskruvdragare

Bruksanvisning

Makita 6336D Borrskruvdragare

Relaterade kategorier